土水特征曲线(SWCC)的滞回特性模拟研究

为了模拟非饱和土的水力、力学特性在多次降雨、蒸发过程中的变化特性,本文以传统域模型的基本原理为基础,推到得到了一个能够模拟SWCC滞后性的计算模型,该模型计算方法简单,易于通过程序实现,且通过与试验数据和其他模型的计算结果对比,验证了该模型的合理性,同时,这个模型可为研究在复杂吸力变化状态下非饱和土的渗流特性、强度特性以及本构模型的研究打下一定的基础。     

The Coarse-Grained Lacustrine Slope Apron Deposits in the Moliqing Area, Yitong Basin, Northeast China

Overlapping gravity accumulation bodies were formed on the northwestern steep slope of the Shuangyang Formation in the Moliqing fault depression of northeast China. This study analyzed in detail the spatial distribution of the lithofacies and lithofacies associations of these accumulation bodies based on more than 600 m of core sections, and summarized 12 major types of lithofacies and three types of lithofacies associations: (1) the proximal zone consists of gravelly debris flows dominated by alluvial channel conglomerates; (2) the middle zone is dominated by various gravity flow deposits and traction flow deposits; and (3) the distal zone is dominated by mudstones with intercalations of sandy debris and turbidites. Combining with the grain size cumulative probability curves analysis, we determined the transformation of debris flows to sandy debris flows and to turbidity currents in the slope zone of the basin margin, and further proposed a lacustrine slope apron model that is characterized by (1) an inconstant multiple source (line source), (2) an alternation of gravity flow deposits and traction flow deposits dominated by periodical changes in a source flood flow system, and (3) the transformation of sandy debris flow deposits into distal turbidity current deposits. This sedimentary model may be applicable to other fault depressions for predicting reservoir distribution.     

Non-symmetrical levee breaching processes in a channel bend due to overtopping

A series of experiments were done to reveal the overtopping breaching process of non-cohesive and cohesive levees in a U-bend flume. The flood hydrograph and breaching geometry were measured and analyzed in detail. The results show that the levee breaching processes can be briefly divided into four stages: slope erosion, longitudinal headward gully-cutting, lateral erosion, and relative stabilization. For non-cohesive levees, non-symmetrical lateral development of the breach occurs throughout the four stages, and the final non-symmetrical coefficient is approximately 2.2–2.6. Larger flow discharge or higher water level can accelerate the breaching process, while coarser sands tend to accelerate the process initially but depress the process at the end. The fluvial erosion rate of a non-cohesive breach shows a power-function relation with the excess wall shear stress. For cohesive levees, a plateau forms in the breach partially blocking the flow in the first two stages. The breach flow is approximately perpendicular to the levee body, and, thus, the erosion rates of the two breach sides are almost the same. Non-symmetrical lateral development mainly occurs in the third stage when the deep gully forms. The final non-symmetrical coefficient is approximately 2.7–3.3. It is expected that these findings can provide a valuable experimental dataset and a theoretical basis for breach closure and flood alleviation.     

桶形基础沉贯室内模型试验研究

桶形基础采用负压沉贯法施工,其贯入阻力与压桩,打桩等施工方法显著不同。本文介绍了在粉土和粉质粘土地层中的一组模型试验情况,认为负压法施工可显著降低粉土的抗贯阻力,但在粉质粘土中减阻效果不明显。     

Tests and applications of an approach to absorbing reflected waves towards incident boundary

If the upstream boundary conditions are prescribed based on the incident wave only, the time-dependent numerical models cannot effectively simulate the wave field when the physical or spurious reflected waves become significant. This paper describes carefully an approach to specifying the incident wave boundary conditions combined with a set sponge layer to absorb the reflected waves towards the incident boundary. Incorporated into a time-dependent numerical model, whose governing equations are the Boussinesq-type ones, the effectiveness of the approach is studied in detail. The general boundary conditions, describing the down-wave boundary conditions are also generalized to the case of random waves. The numerical model is in detail examined. The test cases include both the normal one-dimensional incident regular or random waves and the two-dimensional oblique incident regular waves. The calculated results show that the present approach is effective on damping the reflected waves towards the incident wave boundary.     

长江口附近海域台风浪的数值模拟--以鹿沙台风和森拉克台风为例

利用SWAN波浪模型计算长江口附近海域的台风浪,鉴于长江河口岸界和地形复杂,拟采用曲线网格.为证实曲线网格下的SWAN模型对于复杂地形的有效性,首先选用美国特拉华大学波浪水池实验资料对SWAN模型进行检验,结果表明利用曲线网格能不过多增加计算量而提高关键区域的计算精度.以0215号鹿沙台风和0216号森拉克台风为例,将SWAN模型应用到长江口附近海域,进行台风浪的数值模拟.通过浮标测站实测资料验证,表明有效波高计算值与实测值符合良好.通过综合分析模型计算的波浪场,说明SWAN模型能合理地反映长江口附近海域台风浪的分布.     

GIS工作流系统的长事务处理研究

分析了Sagas事务模型及空间数据版本树技术,设计了一种灵活的长事务补偿控制方案,为集成GIS,MIS及OA的工作流系统提供了有力的事务处理技术支持。     

水中丝爆等离子体破岩机理研究

在隧道开挖、矿山开采等基础工程建设中,岩石爆破技术发挥着重要作用。等离子体碎岩技术具有无污染,破碎过程中无飞石、无有害气体的产生,使用方便,作业效率高,是替代炸药碎岩的最有效可行的方法。本文研究了水中丝爆产生等离子体破碎岩石的机理,分析了高电压脉冲放电过程中的铜丝融化过程,建立了铜丝在各阶段变化的电阻模型,利用MATLAB对不同阶段放电电路的电流进行了数值仿真分析,并与实验得到的电流波形进行对比。研究发现,电流波形,上升沿时间越短,脉冲放电效果越好。铜丝变化产生等离子体的过程中,等离子体通道具有一定的电阻性。实验数据结果与模型数值计算结果基本相符。     

基于多元整体最小二乘优化的多点灰色动态变形分析模型

提出一种多元整体最小二乘优化的多点灰色动态模型,并结合实例验证优化的MGM(1,n)模型的优越性。将优化的MGM(1,n)模型与一般的MGM(1,n)模型进行对比,分析两种模型的建模值和预测值。结果表明,优化的MGM(1,n)模型在建模数据多于4期的情况下建模精度更高,预测精度更准确,更符合实际情况。     

大气重力信号的理论计算及其检测

基于标准大气定律和大气圆柱体分布模型,本文引进了大气重力格林函数,用离散格积方法求得了大气对重力场观测的影响,对台站高程、周围地形和地表温度变化等因素的影响问题进行了讨论．结果说明台站近区气压变化是大气重力信号的主要贡献者,考虑大气质量负荷引起的弹性地球形变效应后,对距台站0．5°的区域积分获得的大气重力导纳值为-0．3603μGal／hPa,占全球大气变化引起的总信号的90％以上,这一理论模型结果与超导重力仪实测结果相吻合,并能较有效地用于消除重力观测中的气压干扰成分．