青藏高原东南缘活动断裂的地震应变能释放系统研究

本文以青藏高原东南缘为研究区域,利用G-R震级能量经验公式和Benioff地震应变能释放曲线,对该区域内1500年以来的历史地震应变能释放进行了系统性的研究。文中给出了各断裂带和断块区的地震应变能释放周期表,及相应的地震危险性。分析发现研究区域地震应变能的释放具有东强西弱,南强北弱的特征,整体上各断层断块区的历史地震应变能释放符合准周期模式,某些断层和断块区上的地震周期具有某种程度上的同步现象。青藏高原东南缘现今处于大释放期中,地震的危险性不能忽视。局部结果显示,安宁河-则木河断裂带、小江断裂带的危险性很高,对于这些危险区要重点跟踪研究。今后仍需结合不同研究方法来提高地震危险性评估的可靠性。     

新型装配式混凝土框架连接节点抗震性能试验

为推广装配式混凝土框架结构的应用,提出3种不同的新型装配式钢筋混凝土框架中节点连接形式,进行低周往复荷载试验。对比各试件的破坏形态、滞回性能、刚度退化、累积耗能和节点剪切变形等抗震指标。研究结果表明:采用方钢管连接的装配式混凝土节点呈现梁端弯曲破坏,采用工字钢连接或对拉螺栓连接的节点呈现节点核心区剪切破坏。采用方钢管的连接形式既能改善节点核心区的破坏形态,又能提高其承载能力、变形能力、耗能能力和梁端转动能力,同时显著改善节点的滞回特性,减小核心区的剪切变形。在弹塑性和塑性变形阶段,采用方钢管连接形式的装配式混凝土节点的抗震性能优于工字钢连接和对拉螺栓连接的节点。此外,采用工字钢连接形式比对拉螺栓连接形式的节点具有更高的承载能力、耗能能力和较小的核心区剪切变形。     

波纹钢管铅阻尼器耗能性能分析研究

提出一种波纹钢管铅阻尼器,介绍了其构造、工作机理、布置形式及特点,采用ABAQUS软件,建立钢管阻尼器、波纹钢管阻尼器和波纹钢管铅阻尼器有限元模型,对其应力分布,传力路径和滞回性能进行模拟分析。结果表明:波纹钢管铅阻尼器耗能减震机理明确,工作性能和耗能性能稳定,滞回曲线饱满以及耗能能力强,具有良好的变形和延性,极限变形大;波纹钢管铅阻尼器通过在波纹钢管内设置铅芯使初始刚度、承载能力和耗能能力得到大幅度提高,既有效保持了波纹钢管的变形能力,又避免波纹钢管发生局部屈曲,使波纹钢管耗能能力得到充分发挥。波纹钢管铅阻尼器在1mm小位移下就可以进入耗能,而且很快进入稳定耗能状态,等效阻尼比稳定在0.3~0.4之间。     

一种基于双平面扫描方式的双能静态CT系统

静态CT技术相较于传统的螺旋CT,在扫描速度上有着革命性的优势,这使得其在行李安检等领域有着巨大的应用前景。目前,要实现静态CT系统的实际应用,需要解决几何尺寸误差标定、有限角重建、双能投影数据匹配等一系列实际问题。本文提出了一种基于分布式X射线源和双平面扫描方式的双能静态CT系统。该系统采用碳纳米管冷阴极射线管,实现X射线源的高速启停;并采用双平面扫描方式,提高投影数据的覆盖角度以减小伪影,并通过采集双能投影数据实现物质识别。本文详细介绍该静态CT系统的系统设计、几何校正及成像方法等内容。实际实验结果显示该系统可对箱包及其内部物体进行三维成像,获得较为理想的形状及材料信息,在行李安检领域具有较高的实际应用价值。     

基于能量原理的粘滞阻尼器附加阻尼系数分配方法研究

以线性粘滞阻尼器加固剪切型规则框架结构为研究对象,基于能量原理提出附加阻尼系数正比于层间位移平方的分配方式。以六层和十二层钢筋混凝土框架为例,以确保结构在中震时保持弹性状态为设计目标,分别采用附加阻尼系数正比于层间位移平方的分配方式以及现有的分配方式,对结构进行消能减震设计。计算结果表明:有控结构均满足中震不坏的要求,层间位移角限值均未超过1/550,减震效果良好;附加阻尼系数正比于层间位移平方的分配方式得出的总阻尼系数最小,为最经济的设计结果。     

村镇滑移隔震建筑瞬时摩擦耗能的参数敏感性分析

给出了村镇滑移隔震建筑瞬时摩擦耗能的概念,并以此概念为响应指标。通过极差大小的对比,分析了该响应指标对刚度比、第二阶段刚度系数、隔震层屈服位移、隔震层摩擦系数、系统质量比和上部结构自振周期六个参数变化的敏感程度,阐述了上述系统参数对瞬时摩擦耗能这一响应指标的影响规律。研究表明:场地条件和地震动幅值大小对瞬时摩擦耗能均有显著影响;在所考虑的参数范围内,上部结构自振周期总是对瞬时摩擦耗能有较为显著的影响,摩擦系数对瞬时摩擦耗能的影响跟场地条件有关,Ⅰ类场地条件中摩擦系数对瞬时摩擦耗能影响不显著,而Ⅱ、Ⅲ和Ⅳ类场地条件中,摩擦系数对瞬时摩擦耗能的影响则非常显著;隔震层屈服位移、刚度比和第二阶段刚度系数总得来讲对瞬时摩擦耗能影响不显著,质量比对瞬时摩擦耗能影响居中。     

基于光子计数探测器的能谱CT的研究

本文的目的是评估光子计数探测器对CT成像的性能的影响,我们对一款基于碲锌镉(CZT)的光子计数探测器进行了性能测试,并搭建一个成像平台。首先对探测器系统进行能量增益的校正以及坏像素点校正,以减少探测器响应的不均匀性对CT成像的影响。然后对探测器进行能量-阈值标定,以确定探测器的工作能量阈值。最终搭建成像系统,对X光能量分别大于36和45keV的数据,获得了模体的重建结果,并对结果进行了分析。     

Hydraulic properties of concentrated flow of a bank gully in the dry‐hot valley region of southwest China

To quantify spatiotemporal variation in hydraulic properties of bank gully concentrated flow, a series of scour experiments were run under water discharge rates ranging from 30 to 120 l min^?1. Concentrated flows were found to be turbulent and supercritical in the upstream catchment area and downstream gully beds. As discharge increased, values of the soil erosion rate, Reynolds number (Re), shear stress, stream power, and flow energy consumption (ΔE) increased while values of the Froude number (Fr) and the Darcy–Weisbach friction factor (resistance f ) did not. With the exception of gully headcut collapse under discharge rates of 60, 90, and 120 l min^?1, a declining power function trend (P < 0.05) in the soil erosion rate developed in the upstream catchment area, headcuts, and downstream gully beds. However, increasing trends were observed in temporal variations of hydraulic properties for downstream gully beds and the upstream catchment area. Despite significant differences in temporal variation between the soil erosion rate and hydraulic property values, relative steady state conditions of the soil erosion rate and ΔE were attained following an initial period of adjustment in the upstream catchment area, headcuts, and downstream gully beds under different discharge rates. A logarithmic growth of flow energy consumption per unit soil loss (ΔE_u) was observed in bank gullies and the upstream catchment area as the experiment progressed, further illustrating the actual reason behind the discrepancy in temporal variation between soil erosion rates and ΔE. Results demonstrate that ΔE can be used to estimate headcut erosion soil loss, but further quantitative studies are required to quantify coupling effects between hydraulic properties and vertical variation in soil mechanical properties on temporal variation for bank gully soil erosion rates. Copyright © 2015 John Wiley & Sons, Ltd.     

Liquefaction potential evaluations by energy-based method and stress-based method for various ground motions

An energy-based liquefaction potential evaluation method (EBM) previously developed was applied to a uniform sand model shaken by seismic motions recorded at different sites during different magnitude earthquakes. It was also applied to actual liquefaction case histories in Urayasu city during the 2011 M9.0 Tohoku earthquake and in Tanno-cho during the 2003 M8.0 Tokachi-oki earthquake. In all these evaluations, the results were compared with those by the currently used stress-based method (SBM) under exactly the same seismic and geotechnical conditions. It was found that EBM yields similar results with SBM for several ground motions of recent earthquakes but has easier applicability without considering associated parameters. In Urayasu city, the two methods yielded nearly consistent results by using an appropriate coefficient in SBM for the M9.0 earthquake, though both overestimated the actual liquefaction performance, probably because effects of plasticity and aging on in situ liquefaction strength were not taken into account. In Tanno-cho, EBM could evaluate actual liquefaction performance due to a small-acceleration motion during a far-field large magnitude earthquake while SBM could not.