Analysis and classification of hyperspectral data for mapping land degradation: An application in southern Spain

Desertification is a severe stage of land degradation, manifested by “desert-like” conditions in dryland areas. Climatic conditions together with geomorphologic processes help to mould desert-like soil surface features in arid zones. The identification of these soil features serves as a useful input for understanding the desertification process and land degradation as a whole. In the present study, imaging spectrometer data were used to detect and map desert-like surface features. Absorption feature parameters in the spectral region between 0.4 and 2.5 μm wavelengths were analysed and correlated with soil properties, such as soil colour, soil salinity, gypsum content, etc. Soil groupings were made based on their similarities and their spectral reflectance curves were studied. Distinct differences in the reflectance curves throughout the spectrum were exhibited between groups. Although the samples belonging to the same group shared common properties, the curves still showed differences within the same group.Characteristic reflectance curves of soil surface features were derived from spectral measurements both in the field and in the laboratory, and mean reflectance values derived from image pixels representing known features. Linear unmixing and spectral angle matching techniques were applied to assess their suitability in mapping surface features for land degradation studies. The study showed that linear unmixing provided more realistic results for mapping “desert-like” surface features than the spectral angle matching technique.     

Analysis of Post-Failure Slope Movements within the Framework of Hazard and Risk Analysis

The paper first recalls briefly a methodological framework to assess landslide hazard and risk analysis in terms of predisposition, triggering andrevealing factors. This framework, that reflects the mechanisms involved in the landslide, is based on the Geotechnical Characterisation of slope movements proposed by Vaunat et al. (1994) and Leroueil et al. (1996). The Geotechnical Characterisation can be schematized by a 3-D matrix having the following axes: types of movement; types ofmaterial; and the four stages of movement: pre-failure, failure, post-failure andreactivation. For each relevant element of this 3-D matrix, there is a characterisationsheet including: the controlling laws and parameters, the predisposition factors, thetriggering or aggravating factors, the revealing factors and the consequences of the movement. The paper focuses afterwards on the post-failure stage, which generallyis the most destructive, and on the mobility index. It is shown that this laterindex can be described as the product of sub-indices associated with failure, brittlenessof the material, ability of the soil to develop pore pressures, geometry of the moving soil mass and characteristics of the terrain. It is also shown how these aspectscan be incorporated into the Geotechnical characterisation of slope movements. This seems to provide a rational basis for examining slope movements at the post-failure stage and assessing associated risks.     

Estimation of azimuth and slowness of tele-seismic signals recorded by a local seismic network

Introduction The azimuth and slowness are two major features of seismic signals. The accurate estimation of them is quite important for both phase identification and event location. Generally, there are two types of seismic stations, i.e. 3-component stations (3C) and arrays. To estimate the two direc-tional parameters, the polarization analysis (Jurkevics, 1988) is commonly used for 3C stations and the frequency-wavenumber spectrum analysis ( f-k) (Capon, 1969; Kvaerna, Doornbos, 1986) is …     

由地方台网记录确定远震信号的方位角和慢度

介绍一种新的适合于地方遥测台网数据处理的方法，估算远震信号到达台站的方位角和慢度．该方法是根据信号在各台站上的到时与台站位置矢量在信号传播方向上的投影之间的相关性的原理．实际分析结果表明，应用该方法对地方台网的记录进行处理时可以准确地计算出信号的方位角和慢度，并能准确快捷地对地方台网记录的远震信号进行解释．      

几种常见矿物的接触角测定及其讨论

为了评价矿物表面与特征液体的界面能量，分别测定了长石、石英、黑云母、方解石、萤石和黄铁矿等7种常见矿物与水、正庚烷和正丁醇的接触角，并计算了相应的表面自由能。结果表明同一矿物不同结晶面(晶面)的接触角有一定的差异，这一差异与矿物结构面上原子种类和相对含量差异有一定的对应关系。     

医院住院部大楼抗震性能评价

以某医院住院部大楼为例进行结构抗震性能评价，首先分析了场址的地震环境，开展了地震危险性分析工作，合成了不同地震危险水平下的地震动加速度时程。进而，通过对结构的模型简化，应用时程分析方法分析结构的抗震性能，得出了一些对其改造加固有意义的结论。     

Parameters affecting maximum fluid transport in large aperture fractures

We present results of laboratory experiments to study the behavior of liquids moving in unsaturated wide-aperture fractures. A 5-mm-thick glass plate cut with a 1.7-mm aperture was used as a fractured rock analog to study behavior of film and capillary droplet flow modes. Flow rates ranged between 0.6 and 6.0 ml/min. Variability in the ambient barometric pressure, resulting from weather conditions, seemed to play a role in the natural selection of flow mode. For droplet mode, constant input conditions resulted in highly variable transport properties within the fracture. The advancing meniscus exhibited a dynamic contact angle that was a function of the droplet speed and much larger than the static contact angle. Flow rate was reduced due to the larger contact angle. Analytical expressions for droplet velocity and flow capacity are presented as a function of the dynamic rather than the static contact angle.     

新技术在北极星天文方位角测量中的应用

使用GPS接收机的UTC作为北极星天文方位角测量的时间比对的标准时间，利用推估UTl与UTC的差值，将时间归算到UTl的方法，可满足各等级天文方位角测量的要求，现场计算零点恒星时和北极星坐标的精度满足北极星天文方位角测量的要求，实现了现场评估测量精度。     

GPS折射角资料的变分同化试验

越来越多的新型观测资料为数值天气预报水平的进一步提高提供了许多新的机会。在各种新型的观测资料中,GPS(全球定位卫星系统)折射角资料无疑是非常重要的。GPS折射角资料具有分辨率高、全天候探测、覆盖全球等优点,实现对GPS折射角资料的变分同化,将具有非常重要的意义。文中介绍了如何获得及同化GPS折射角资料的原理。对GPS折射角资料的变分同化可以分为两种:间接同化和直接同化,文中对这两种方法都作了具体介绍。在变分同化的最小化过程中,计算效率无疑是最重要的,而优化步长的计算又直接关系到算法效率的成败。根据最小化算法的特点,通过数学推导,得出一种适合于各种最小化算法的计算优化步长的自适应方法。最后,还利用1995年10月11日的GPS折射角资料进行了数值试验,结果表明了变分同化方法和计算优化步长方法的有效性。     

导线测角精度超限问题的探讨

利用实例阐述了一、二级导线测量严密平差后，测角中误差超限问题，根据《规范》精度指标，分析了测角中误差超限的原因；提出一、二级导线测量严密平差后，没边、测角中误差限值的建议。