Dynamics of the mid-ocean ridge plate boundary: Recent observations and theory

The global mid-ocean ridge system is one of the most active plate boundaries on the earth and understanding the dynamic processes at this plate boundary is one of the most important problems in geodynamics. In this paper I present recent results of several aspects of mid-ocean ridge studies concerning the dynamics of oceanic lithosphere at these diverging plate boundaries. I show that the observed rift valley to no-rift valley transition (globally due to the increase of spreading rate or locally due to the crustal thickness variations and/or thermal anomalies) can be explained by the strong temperature dependence of the power law rheology of the oceanic lithosphere, and most importantly, by the difference in the rheological behavior of the oceanic crust from the underlying mantle. The effect of this weaker lower crust on ridge dynamics is mainly influenced by spreading rate and crustal thickness variations. The accumulated strain pattern from a recently developed lens model, based on recent seismic observations, was proposed as an appealing mechanism for the observed gabbro layering sequence in the Oman Ophiolite. It is now known that the mid-ocean ridges at all spreading rates are offset into individual spreading segments by both transform and nontransform discontinuities. The tectonics of ridge segmentation are also spreading-rate dependent: the slow-spreading Mid-Atlantic Ridge is characterized by distinct bulls-eye shaped gravity lows, suggesting large along-axis variations in melt production and crustal thickness, whereas the fast-spreading East-Pacific Rise is associated with much smaller along-axis variations. These spreading-rate dependent changes have been attributed to a fundamental differences in ridge segmentation mechanisms and mantle upwelling at mid-ocean ridges: the mantle upwelling may be intrinsically plume-like (3-D) beneath a slow-spreading ridge but more sheet-like (2-D) beneath a fast-spreading ridge.     

热液成矿作用的地质地球化学动力学——以胶东牟平-乳山金矿带为例

通过对胶东牟平—乳山热液脉状金,铅锌矿床成矿动力学控制规律的研究,说明了建立热液成矿反应体系的方法,并得出以下认识:（1）区域断裂构造活动,通过影响成矿反应体系的热力学性质和条件,控制元素的富集和分散。（2）热液成矿过程中容矿断裂活动可划分为两种作用方式:脆性破裂和韧—脆性张开,构成热液成矿的两种构造动力学环境。（3）热液成矿反应体系是一种开放的动态的热力学体系。断裂的脆性破裂阶段,使体系处于强烈的过饱和状态,矿质在远离平衡状态下快速结晶,加剧物质分异;在脆—韧性张开阶段,矿质在接近平衡态体系中缓慢晶出。（4）热液演化晚期,金在残余溶液中富集;当断裂再次发生构造脉动震颤时,早期形成的块状黄铁矿矿石碎裂,富金溶液充填其中,形成含裂隙金和晶隙金的富矿石。成矿体系热力学演化与构造动力学条件有利的匹配控制着富矿石的形成。     

铁砚磨穿指蘸墨 不用扬鞭自奋蹄——志《山西地震》创刊20周年

回顾了《山西地震》创刊20年的历史,叙述了《山西地震》.编辑部在自身建设、执行科技期刊编排标准、为防震减灾事业默默奉献的情况,总结了经验、教训,指出了今后努力的方向.     

杠杆点评估及设计空间抗差

本分析了杠杆点的几何含义和统计特征,从杠杆点的保差性,矩阵的摄动和参数估值可靠性的观点出发讨论了杠杆点的不利和有利的两个方面,提出了一个全面的设计空间抗差方案。     

短周期仪器记录在远震分析中的应用

地震泼由多种频率成份组成,在其传播过程中。由于地球介质的滤波作用,随着传播距离的增大。高频成份逐渐被衰减。周期越大的成份传播越远。因此,在地震观测上,不同频带的地震仪用于观测不同震中距范围的地震,使仪器较好地响应,就我国台网而言,短周期仪用于地方震、近震的监测,中长周期仪和长周期仪用于远震,极远震的监测,其中长周期仪偏重于记录极远震。但作者在实际分析工作中注意到,短周期仪的记录应用于远震,极远震的分析,显示出独特的作用,充分挖掘和利用短仪资料,将会更加丰富远震、极远震的震相资料。本文以高台地震台的资料为依据,从震中距和震级角度,与中长仪和长仪作比较,对短仪记录远震、极远震的震相及特征作了统计分析与初步探讨,并对新疆地区“影区”地震S波的记录、日本地区地震_PPcP等震相的出现提出了现象的存在,给出了相应的观测结果,以待步一步研究。     

大理州2005年初夏干旱成因探析

大理州2005年初夏出现了严重干旱气象事件.从500pHa高空环流特征、500pHa距平场特征、西太平洋副高特征量及北太平洋中低纬海温距平场、OLR距平场对这次干旱的成因进行了分析,分析结果表明：2005年初夏（4月1日～6月10日）降水异常偏少气温明显偏高是发生干旱的主要原因,高空大气环流异常、西太平洋副高持续偏强偏西、冷空气活动偏北是导致干旱的直接原因;孟加拉湾南部4月OLR场呈明显正距平,抑制低值系统的发展和东北移影响云南,是影响2005年大理初夏干旱重要原因;北太平洋中低纬海温特征与大理州初夏干旱有一定的遥相关性.     

西安南郊丰水年秋季土壤水分研究

 通过对西安南郊丰水年秋季土壤含水量的测定，研究了地下0~6 m之间土壤含水量的变化与土壤干层的恢复问题。研究结果表明，丰水年西安南郊人工林下2~3 m的土壤含水量在20％左右，远远高于正常年份的土壤含水量，而且大于表层和深层的土壤含水量。分析得出，土壤干层发育较弱的地区在降水丰富的年份可以得到一定程度的恢复；西安地区基本适合进行人工造林；通过人工措施，增强降水入渗和土壤含水量，对树木成活和长期的生长应当具有明显的作用。     

近50 a渭河流域洪水成因分析及防治对策

 通过对近50 a渭河流域洪水的年际变化、月际变化和潼关高程变化的综合分析得出，造成该流域洪水灾害的原因有降水量年内分配不均和年际变化大，滩面淤积加重，支流河口淤塞以及河势、流态的恶化等。针对这些原因，根据渭河流域洪水灾害的特点，提出了相应的防治措施，即降低下游高程，减少河道的淤积，增大河道泄洪能力；利用水库进行调水调沙，引进客水冲刷渭河下游；防洪工程要除险加固，提高防洪标准与抗洪能力；恢复林草植被，遏止水土流失，从源头上控制泥沙入河等。     

Na depletion in modern adakites via melt / rock reaction within the sub-arc mantle

Interaction between slab-derived melt and mantle peridotite and the role of slab melt as a metasomatizing agent in the sub-arc mantle is being increasingly recognized. Adakite, the slab melt erupted on the surface, usually exhibits anomalously high MgO, CaO, Cr and Ni contents that indicate interaction with mantle peridotitite. Here we note that Cenozoic adakites have Na₂O contents below 5.8 wt.% with ∼95% samples lower than 5.0 wt.%, and are generally depleted in this component relative to experimental basalt partial melts (mostly beyond 5.0 wt.% and up to 9.0 wt.% Na₂O) produced under 1.5-3.0 GPa conditions that are most relevant to adakite production. We interpret the adakite Na depletion to be also a consequence of the melt / rock reaction that takes place within the hot mantle wedge. During ascent and reaction with mantle peridotite, primary adakite melts gain mantle components MgO, CaO, Cr and Ni but lose Na₂O, SiO₂ and perhaps K₂O to the mantle, leading to Na-rich mantle metasomatism. Selective assimilation of predominately mantle clinopyroxene, some spinel and minor olivine at high T/P has been considered to be an important process in producing high-Mg adakites from primary low-Mg slab melts [Killian, R., Stern, C. R., 2002. Constraints on the interaction between slab melts and the mantle wedge from adakitic glass in peridotite xenoliths. Eur. J. Mineral. 14, 25-36]. In such a process, Na depletion in the assimilated melt is the result of dilution due to the increase in melt mass. Phase relationships in the reaction system siliceous melt + peridotite and quantitative calculation suggest that assimilation of mantle clinopyroxene, olivine and spinel and fractional crystallization of sodic amphibole and orthopyroxene, under conditions of moderate T/P and increasing melt mass, is also an important process that modifies the composition of adakites and causes the Na depletion.