组合结构有限元计算存在的问题和处理方法

梁、板、壳等结构单元在有限元计算中使用十分广泛,但由于其几何特点,在组合结构有限元计算中,如果不正确处理,有时会给计算结果带来一定的影响。针对组合结构分析中,应力集中及几何位置简化等导致较大计算误差的情况,以地铁车站结构中常见的板梁组合结构为分析对象,从工程实用角度出发提出了相应的对策和处理方法。采用这些措施,可以在使用现有通用有限元软件进行计算的情况下,获得较符合实际的结果     

水工隧洞钢筋混凝土衬砌非线性有限元分析

在已有岩土程序的基础上,考虑混凝土材料的开裂特性,增加了钢筋和混凝土开裂的模拟功能,编制了相应的非线性有限元计算程序,实现了塑性迭代和开裂迭代计算的耦合。结合某水电站导流隧洞的工程实例,进行了施工、运行和封堵全过程仿真分析。计算过程显示：本算法迭代计算稳定,收敛性好,满足精度要求。同时研究结果表明：运行期,混凝土衬砌的开裂范围、裂缝宽度和相应的钢筋应力随着衬砌与围岩之间初始缝隙值的增大而增大;封堵期,围岩塑性区随着外水位的增加而增大,需要采取相应的加固措施保证围岩稳定。     

CFG桩复合地基沉降计算探讨

CFG桩（水泥粉煤灰碎石桩）复合地基是新近发展起来的一项地基处理技术,具有承载力提高幅度大,地基沉降小,适用范围广,造价低,施工方便等特点。阐述了CFG桩复合地基加固机理及沉降模式,详细讨论了其沉降计算,包括它的计算厚度、影响因素、压缩模量选取及附加压力计算等。提出按变形控制理论进行变形计算有其优点,但仍有很多工作要做。     

Modelling of the retreat process of composite riverbank in the Jingjiang Reach using the improved BSTEM

Bank retreat in the Jingjiang Reach is closely related not only to the near‐bank intensity of fluvial erosion but also to the composition and mechanical properties of bank soils. Therefore, it is necessary to correctly simulate bank retreat to determine the characteristics of fluvial processes in the Jingjiang Reach. The current version of bank stability and toe erosion model (5.4) was improved to predict riverbank retreat, by inputting a dynamic water table, and calculating the approximation of the distribution of dynamic pore water pressure in the soil near the river bank face, and considering the depositional form of the failed blocks, which is assumedly based on a triangular distribution, with the slope approximately equalling the stable submerged bank slope and half of collapsed volume deposited in the bank‐toe region. The degrees of riverbank stability at Jing34 were calculated using the improved bank stability and toe erosion model. The results indicate the following trends: (a) the degrees of riverbank stability were high during the dry season and the rising stage, which led to minimal bank failure, and (b) the stability degrees were low during the flood season and the recession stage, with the events of bank collapse occurring frequently, which belonged to a stage of intensive bank erosion. Considering the effects of bank‐toe erosion, water table lag, and the depositional form of the collapsed bank soil, the bank‐retreat process was simulated at the right riverbank of Jing34. The model‐predicted results exhibit close agreement with the measured data, including the total bank‐retreat width and the collapsed bank profile. A sensitivity analysis was conducted to determine the quantitative effects of toe erosion and water table lag on the degree of bank stability. The calculated results for toe erosion indicate that the amount of toe erosion was largest during the flood season, which was a primary reason for bank failure. The influence of water table lag on the degree of stability demonstrates that water table lag was an important cause of bank failure during the recession stage.     

An analytical model for vapor‐phase volatile organic compound diffusion through landfill composite covers

One‐dimensional mathematical models for vapor‐phase volatile organic compound (VOC) diffusion through composite cover barriers are presented. An analytical solution to the model was obtained by the method of separation of variables. The results obtained by the proposed solution agree well with those obtained by a numerical analysis. Based on the proposed analytical model, the VOC breakthrough curves of five different composite covers are compared. The effects of degree of saturation of geosynthetic clay liner (GCL) or compacted clay liner (CCL) on VOC migration in the composite covers are then presented. Results show that the composite cover barriers provide much better diffusion barriers for VOC than the single CCL. The top surface steady‐state flux for a composite barrier, consisting of a 1.5 mm geomembrane (GM) and a 20 cm CCL, can be 8.3 times lower than that for a 30 cm CCL. The surface steady‐state flux for the case with (1.5 mm GM + 6 mm GCL) was found to be 2.3 times lower than that for the case with (1.5 mm GM + 20 cm CCL). The degree of saturation S_r of the CCL has a great influence on VOC migration in composite covers when S_r is larger than 0.5. The steady‐state flux at the surface of GM for the case with S_r = 0.7 can be 1.8 times lower than that for the case with S_r = 0.2. The proposed analytical model is relatively simple and can be used for verification of complicated numerical models, analysis of experimental data and performance assessment of composite cover barriers. Copyright © 2016 John Wiley & Sons, Ltd.     

新疆阿尔泰库卫铜镍硫化物-钛铁氧化物复合型矿化镁铁-超镁铁质杂岩体成因

库卫镁铁-超镁铁质杂岩体位于新疆阿尔泰南缘,兼具铜镍矿化岩体和钒钛铁矿化岩体的双重特征,主要组成岩石类型有中粒辉长岩、条带状橄榄辉长岩、橄榄苏长辉长岩、角闪辉长岩和含橄辉长岩等。本文采用LA-ICP-MS锆石U-Pb定年法,获得中粒辉长岩、橄榄苏长辉长岩和含橄辉长岩的加权平均年龄分别为398.7±3.7Ma、397.5±2.3Ma和385.2±1.6Ma,表明库卫岩体是早中泥盆世构造-岩浆活动的产物。岩体的主量元素显示其属亚碱性系列,并具有向拉斑系列岩石演化的趋势。具有Ba、U、Ta、Pb、Sr、Ti和Eu的正异常,Th的负异常,显示了相似的LREE相对富集的右倾型配分模式,表明它们可能为同源岩浆演化的产物。结合地球化学特征和区域地质背景,推测库卫岩体为早中泥盆世俯冲消减环境的产物,其原始岩浆可能来源于受俯冲物质交代的地幔楔和软流圈的混合体,不同的岩石类型是相似来源的岩浆经强烈分异的结果。库卫岩体兼具铜镍矿化岩体和钒钛铁矿化岩体的双重特征,但形成铁钛矿床的潜力略显不足。     

钢管混凝土叠合柱弹性波CT空洞与脱空缺陷检测分析

钢管混凝土叠合柱是在钢筋混凝土柱中部设置钢管混凝土的一种叠合构件,其缺陷检测已是工程检测领域面临的重要问题。弹性波CT技术是一种发展迅速的工程无损检测技术,能够直观、准确地显示出物体的内部缺陷。针对影响叠合柱性能的空洞与脱空缺陷,探索了弹性波CT无损检测技术,设计了带空洞素混凝土柱、带空洞叠合柱、带脱空叠合柱三个试件,并开展了叠合柱弹性波CT缺陷检测试验。研究结果表明,弹性波CT能够有效地检测叠合柱的空洞与脱空缺陷,填补了叠合柱缺陷检测领域的空白。     

海洋潮汐浪溅区混凝土表面氯离子浓度计算模型

海洋混凝土结构的表面氯离子浓度反映了海洋氯化物环境的腐蚀作用强度,是海洋混凝土结构耐久性分析和定量设计的重要参数。本文依据国内外不同地区的大量自然暴露试验数据,通过数理统计和回归分析,确定了各种海洋环境条件下表面氯离子浓度的统计特征值,分析了海洋潮汐浪溅区混凝土中氯离子的传输机理和积聚规律,揭示了水胶比对混凝土表面氯离子浓度的影响规律,进而综合考虑水胶比、胶凝材料种类和时变特性等因素的影响,建立了海洋潮汐浪溅区混凝土表面氯离子浓度的改进计算模型。结合国内外各种表面氯离子浓度经验模型的预测结果和海洋自然暴露试验的实测数据,对比验证了所建立表面氯离子浓度计算模型的有效性和适用性,为海洋氯化物环境下混凝土结构的耐久性设计和服役寿命分析提供了重要边界条件。     

干湿交替下水分及氯离子在混凝土中传输的细观数值模拟

氯离子侵蚀已成为影响海洋及近海环境中混凝土结构耐久性的主要因素。考虑材料组成的非匀质特性,将混凝土看作由粗骨料、硬化水泥砂浆及二者界面过渡区组成的三相复合材料的细观层次方法,是开展物质传输过程研究的新途径。建立非饱和混凝土中氯离子传输的一维非线性对流扩散方程,并利用伽略金加权余数法给出了该方程的有限元形式,采用适用于物质传输的细观格构网络模型开展了水分及氯离子在非饱和混凝土中传输过程及分布规律研究,分析了干湿循环周期和循环机制对水分及氯离子传输性能的影响规律。数值计算结果表明,干湿交替下,相同的干燥时间,非饱和混凝土内水分及氯离子的侵入深度主要取决于湿润时间,而干燥时间和循环周期数则影响混凝土表层氯离子含量,并在混凝土表层10 mm处有浓度集中现象。     

Monitoring crack development in fiber concrete beam by using electrical resistivity imaging

Accurate detection of damaged concrete zones plays an important role in selecting the proper remedial technique. This study presents results from an application of the electrical imaging method to monitor the development of cracks in fiber concrete beams.The study showed that resistivity measurements on the concrete specimens were able to detect the increase of concrete resistivity with the curing time that reached about 65 Ωm after 28 days of curing. A similar development trend of concrete compressive strength was also found.Two types of cracks were investigated, i.e., artificial cracks made of plastic sheets inserted in concrete and cracks developed during a four-step loading test. A mini-electric imaging survey with Wenner array was conducted on the tension face of the beams. To deal with the effect of the beam size new procedures to correct resistivity measurements before inversion were proposed and successfully applied in this study. The results indicated that both crack direction and depth could be accurately determined in the inverted resistivity sections.