对一种振冲碎石桩复合地基沉降计算方法——Priebe法的改进

通过对经典的Priebe沉降计算法分析,以及面积置换率的变化对桩体压缩性假设作了改进;对桩土重度差异及承受荷载时应力和变形与深度的关系作了分析,归纳出相应的数学计算公式,用工程实例进行了验证。得到的结果表明改进是合理、适用的,可为今后的设计和施工提供参考。     

地面核磁共振模型约束反演含水层参数

导电模型的地面核磁共振感应电动势是含水量的非线性函数.引入模型约束的迭代反演方法求解该非线性问题的反演.在反演过程中,根据理论公式计算迭代过程中灵敏度矩阵,并采用平坦模型和光滑模型两种约束.对均匀半空间、层状导电模型和实际数据进行了反演模拟,结果表明,模型约束迭代反演方法能从地面核磁共振感应电动势获得含水层较为合理的含水量及分布,且该结果可以从作为初始模型的均匀含水量分布反演得到.对无噪音数据,平坦模型和光滑模型约束对反演的含水量分布影响不大;但当数据存在一定的噪音时,平坦模型约束将比光滑模型约束获得更为精确的含水层参数.     

小波边缘分析建模波阻抗反演方法在煤层解释中的应用

受限于地震波主波长的1／4,常规地震处理难以分辨较薄煤层。基于模型的波阻抗反演虽然克服了厚、薄煤层计算问题．但因难以得到准确的高频部分,很多情况下反演结果的精度和分辨率往往不能满足地质预测的要求。小波边缘分析建模波阻抗反演方法是从地震数据中提取地震特征参数,用于建模并参与迭代反演。该方法即可以弥补反演过程中高频成分的误差,减少对钻井数据的依赖程度,得到较为合理的初始模型,又可提高反演的精度和分辨率．使反演结果更好的反映实际地下地质情况。利用该方法,对大井-将军庙及新疆红沙泉2个勘探区的侏罗系中统西山窑组含煤地层进行波阻抗反演,反演结果与钻井资料进行比较,其中大井一将军庙0802及0809号孔单煤层厚度误差分别为3％、8％．新疆红沙泉多煤层厚度及煤层之间的夹层厚度预测结果除B6煤层误差较大外,其它误差均小于7％．可见该反演方法的计算结果比较准确。     

努力提高三维地震勘探精度，为西部煤炭工业做出新贡献

以国家重大产业技术开发专项“西部煤炭资源高精度三维地震勘探技术”项目的由来、意义和总体研究目标为引,概括的介绍了项目依托工程中各个专项技术研究完成情况,并对非均匀介质成像技术、高精度三维地震静校正技术、高密度采集技术、特观技术、岩性反演技术、属性体解释技术等六项重大关键技术取得的突破性进展进行了重点说明。指出随着我国煤炭生产重点的逐步西移,应加强诸如叠前、叠后深度偏移技术的研究,以解决复杂山区三维地震面元内地震反射波散射问题,提高其三维地震勘探精度,为西部煤炭工业做出新贡献!     

Multi-Scale Texture Modeling

Patterns of crystallographic preferred orientation are referred to as texture. The specific subject of texture analysis is the experimental determination and interpretation of the statistical distribution of orientations of crystals within a specimen of polycrystalline material, which could be metals or rocks. The objective is to relate an observed pattern of preferred orientation to its generating processes and vice versa. In geosciences, texture of minerals in rocks is used to infer constraints on their tectono-metamorphic history. Since most physical properties of crystals, such as elastic moduli, the coefficients of thermal expansion, or chemical resistance to etching depends on crystal symmetry and orientation, the presence of texture imparts directional properties to the polycrystalline material. A major issue of mathematical texture analysis is the resolution of the inverse problem to determine a reasonable orientation density function on SO(3) from measured pole intensities on , which relates to the inverse of the totally geodesic Radon transform. This communication introduces a wavelet approach into mathematical texture analysis. Wavelets on the two-dimensional sphere and on the rotational group SO(3) are discussed, and an algorithms for a wavelet decomposition on both domains following the ideas of Ta-Hsin Li is given. The relationship of these wavelets on both domains with respect to the totally geodesic Radon transform is investigated. In particular, it is shown that the Radon transform of these wavelets on SO(3) are again wavelets on . A novel algorithm for the inversion of experimental pole intensities to an orientation density function based on this relationship is developed.     

SOME NEW UNDERSTANDINGS OF LAND-SURFACE PROCESSES IN ARID AREA FROM THE HEIFE*

The survey for the HEIFE(Atmosphere-Land Surface Processes Experiment at Heihe River Basin,Western China) is given in the paper.The following basic subjects for land-surface processes in arid areas are studied:(1) the general characteristics of the energy budget on ground surface in arid areas;(2) the parameterization of the land surface processes;(3) the interaction between oasis and its desert circumstances,a special phenomenon in arid areas.The analysis shows that the sensible heat flux in the surface energy budget is in the majority,and the latent heat flux may be neglected.The influence of atmospheric stratification stability on the turbulent transfer of energy and substance must be considered in parameterization of land surface processes in arid areas.The "cold island effect" phenomenon in oasis and the "humidity inversion" phenomenon in desert near oasis are the result of the interaction between them.The results would improve the understanding of land surface processes in arid areas.     

Surface renewal analysis for sensible and latent heat flux density

High frequency temperature measurements were recorded at five heights and surface renewal (SR) analysis was used to estimate sensible heat flux density (H) over 0.1 m tall grass. Traces of the temperature data showed ramp-like structures, and the mean amplitude and duration of these ramps were used to calculate H using structure functions. Data were compared with H values measured with a sonic anemometer. Latent heat flux density (E) was calculated using an energy balance and the results were compared with E computed from the sonic anemometer data. SR analysis provided good estimates of H for data recorded at all heights but the canopy top and at the highest measurement level, which was above the fully adjusted boundary layer.     

Densities of Huanghe River estuary and Bohai Bay waters

The densities of 36 water samples from the Huanghe River estuary and Bohai Bay were determinedby a magnetic float densimcter under three temperatures from 15℃ to 25℃.All the measured densities ofsamples were greater than that of the values calculated from the International Equation of State of Seawater.The differences between the measured and calculated densities increased with the decrease of salinities.The dif-ferences appeared exponentially correlated with[Ca~(2+)]/s,[Mg~(2+)]/s and[SO_4~(2-)]/s,and had"s"type curverelationship with the alkalinity in all salinity range.But in the salinity ranging from 25.72 to 31.57,therelationships were all linear.The density difference can be estimated from the equation △ρ（10~3kg·m~(-3)）=（-2.79+236.5([Ca~(2+)]/s)/(-9.7464×10~（-3）+[Ca~(2+)]/s).It was the high alkalinity and[Ca~(2+)]/s that resulted in the measured densi-ties of seawaters being higher than the calculated densities in the Huanghe estuary and Bohai Bay.     

勘查油气田化探新方法——土壤相态烃测量法

烃气测量是油气化探最主要的方法。目前应用的烃气测量方法有两类:一类是测量土壤中游离烃气如K—V指纹法、吸附丝法、物上气法及直接取土壤气测量法等。此类方法由于需特殊设备及壤气测量方法本身固有的缺陷,目前还未得到普遍应用,另一类为土壤吸附烃气法即国内外目前普遍使用的酸解烃气法、此法在多数油气田上取得好效果,但也有相当多的地区如黄土、荒漠及水网发育等特殊景观区效果不好或不显著。本文介绍一种新的烃气测量法──土壤相态烃测量法。这是用一种特殊的技术,只选择性提取由油气藏渗漏过程中保存在运移通道围岩及近地表土壤各种次生矿物结构中以"穴居"态存在的轻烃组分。"穴居"态烃为累积性的指标,不受外界温度、修水等的影响,保存较牢固,测定结果稳定。相态烃法避免了酸解烃法存在的生物成因烃、矿物同生烃及碳酸盐的干扰影响,提高了测量指标的信噪比,突出了应有的异常。本方法已在黄土厚覆盖区两个已知油气田和一个风成沙覆盖的断裂发育油田上试验获得成功,结果表明相态烃法优于酸解烃法。     

The deposit size frequency method for estimating undiscovered uranium deposits

The deposit size frequency (DSF) method has been developed as a generalization of the method that was used in the National Uranium Resource Evaluation (NURE) program to estimate the uranium endowment of the United States. The DSF method overcomes difficulties encountered during the NURE program when geologists were asked to provide subjective estimates of (1) the endowed fraction of an area judged favorable (factorF) for the occurrence of undiscovered uranium deposits and (2) the tons of endowed rock per unit area (factorT) within the endowed fraction of the favorable area. Because the magnitudes of factorsF andT were unfamiliar to nearly all of the geologists, most geologists responded by estimating the number of undiscovered deposits likely to occur within the favorable area and the average size of these deposits. The DSF method combines factorsF andT into a single factor (F·T) that represents the tons of endowed rock per unit area of the undiscovered deposits within the favorable area. FactorF·T, provided by the geologist, is the estimated number of undiscovered deposits per unit area in each of a number of specified deposit-size classes. The number of deposit-size classes and the size interval of each class are based on the data collected from the deposits in known (control) areas. The DSF method affords greater latitude in making subjective estimates than the NURE method and emphasizes more of the everyday experience of exploration geologists. Using the DSF method, new assessments have been made for the young, organic-rich surficial uranium deposits in Washington and idaho and for the solution-collapse breccia pipe uranium deposits in the Grand Canyon region in Arizona and adjacent Utah.