锆石中钛温度计在鲁西—苏北地区中生代侵入杂岩中的应用

利用锆石中钛地质温度计对鲁西—苏北地区出露的8个中生代侵入杂岩的岩浆岩结晶温度进行计算,结果表明研究区斑井岩体的平均岩浆结晶温度为715~716℃,蔡山岩体为653℃,丰山岩体为697℃,夹沟岩体为711℃,利国岩体为737℃,铁铜沟岩体为766℃,上峪岩体为889℃,金岭岩体为770℃。岩体的岩浆结晶温度沿侵入杂岩带展布方向,从S到N依次增高,暗示其岩浆起源深度逐渐加大。岩浆结晶温度计算结果大致限定了各岩体的岩浆源区深度范围,结合锆石寄主岩石和寄主岩石中的深源包体的研究表明研究区中生代侵入杂岩体的母岩浆起源于上地幔和/或下地壳。     

金矿复杂地层金刚石取心钻头选型试验研究

金矿复杂地层金刚石钻进存在岩石坚硬、地层打滑、漏失等问题,影响钻头寿命和钻进效率。在山东招远某金矿勘探中,通过对3个单位制造的金刚石钻头进行现场对比试验研究,证明JBD-75S仿生金刚石钻头在提高钻头寿命方面具有较大的优越性,适合该复杂地层钻进。     

Investigation of a shallow alluvial aquifer using geoelectrical methods: a case from Turkey

Near-surface geophysical methods are commonly used to solve a wide class of geological, engineering and environmental problems. In this study, a geoelectrical survey was performed to investigate an alluvial aquifer. The study area is located in the southwest of the Çubukluda? graben, situated in the south of ?zmir, Turkey. The geophysical studies included the electrical resistivity imaging and self-potential (SP) methods. The resistivity data were acquired along eight profiles in the northern part of the study area by a Wenner-Schlumberger electrode configuration and the data processing was achieved by a tomographic inversion technique. The SP data were collected by gradient technique along 16 profiles. Total field values were calculated for each profile by addition of the successive gradient values, then a total field SP map was obtained. The water-saturated zone in the northern part of the study area was clearly revealed by the electrical resistivity imaging and the SP survey yielded useful information on the subsurface fluid movement.     

Evaluation of landfill disposal boundary by means of electrical resistivity imaging

This paper deals with an employment of electrical resistivity imaging (ERI) for survey of leachate content on the waste disposal site in Northern Israel. The research consisted of conducting ten ERI lines and drilling investigation wells. Data simulation used a 2D EarthImager inversion program. Analysis of 2D ERI interpretation results shows that determination of the boundary between the landfill body bottom intensively saturated with leachates and underlying layers of highly water saturated fat nonconsolidated clays presents a challenge. However, statistical analysis of ERI data indicates that standard deviation and confidence interval of a set of resistivity data measured in the landfill body are significantly larger than those in underlying clays. Moreover, maximum changes of these parameters are found on the boundary between landfill body and underlying soil, thus reflecting natural differences in scattering of resistivity data measured in these two objects.     

Combined analysis of electrical resistivity and geotechnical SPT blow counts for the safety assessment of fill dam

Electrical resistivity survey and the geotechnical SPT blow counts (N value) method were simultaneously analyzed to investigate the stability of a center-core type earth-fill dam against the seepage phenomenon. The coupling of these heterogeneous field methods provided a chance to understand the status of underground material by comparing the geophysical and geotechnical view. The analysis shows that the zones with low resistivity value generally have low N value, which means low stiffness. However, some zones with a high resistivity pattern are not accompanied by an increase of its N value, and are even showing a lower N value. These results imply that one should be careful to directly correlate resistivity value with the real status of the core material of a fill dam. And a highly resistive zone may be in poor status due to the effect of increase of resistivity value as a result of the piping condition. Additional laboratory tests show that there is a deficiency of fine soil particles believed as the clay at the troubled region, which means an increase in resistivity value. Therefore, multiple explorations should be planned to reduce the uncertainty in application of geophysical methods to dam safety evaluation in order to compensate the resistivity information of core material.     

Petrogenesis of greenstones from the Mino–Tamba belt, SW Japan: Evidence for an accreted Permian oceanic plateau

Permian greenstones in the Jurassic Mino–Tamba accretionary complex, southwest Japan, are divided into three distinct series on the basis of their geological occurrence, mineralogy, and geochemistry. A low-Ti series (LTS) is associated with Lower Permian chert and limestone, and is the most voluminous of the three series. The LTS shows slightly more enriched geochemical and isotopic characteristics than MORB. A transition series (TS) is mainly associated with Lower Permian chert, and has more enriched geochemical signatures than MORB. Its isotopic characteristics are divided into enriched and depleted types. A high-Ti series (HTS) occurs as sills and hyaloclastites within Middle Permian chert and as dikes intruding the TS. Some HTS rocks have high MgO contents. The HTS is characterized by enrichment in incompatible trace elements and an isotopic composition comparable to HIMU-type basalt. The geochemistry of the voluminous LTS is similar to that of the oceanic basalt series of the Kerguelen plateau, suggesting production by partial melting of a shallow mantle plume head below thick oceanic lithosphere in Early Permian time. We infer that the TS formed simultaneously at the margins of the mantle plume head. In contrast, the HTS may have resulted from partial melting of a deep mantle plume tail in Middle Permian time. Permian greenstones in the Mino–Tamba belt may have thus formed by superplume activity in an intra-oceanic setting. Given the presence of two known contemporary continental flood basalt provinces (Siberia and Emeishan) and some accreted oceanic plateau basalts, the vast magmatism of the Mino–Tamba oceanic plateau suggests a large-scale superplume pulse in Permian time. Accretion of oceanic plateaux may have played an important role in the growth of continental margins and island arcs in Japan and elsewhere in the circum-Pacific region.     

大数据环境中自愿接种策略及个体安全保护方法研究

大数据背景下,如何充分利用数据分析、挖掘等方法有效发现传染病传播规律,对于疾病防控、个体的安全保护有着重要作用和意义.自愿接种是对群体获得广泛免疫和安全保护的有效方式.以往的研究中,个体根据以往传播过程中的患病风险或者收益来确定是否进行自愿接种,如个体与其邻近的邻居比较上一个季节获得的收益来决定是否采用邻居的策略,也就是说策略更新对于群体的安全保护至关重要.本文研究了不同的策略更新方式对自愿接种行为的影响.通过比较个体采用不同的策略更新方式所获得的群体平均接种比例、疾病暴发规模和社会总花费,研究并设计出合理的策略更新方式,即在花费成本比较低的情况下,获得比较大的群体平均接种比例和较小的疾病覆盖率.     

城市交通热点区域的空间交互网络分析

城市热点区域是人们频繁活动的体现,利用人们的出行可构建空间交互网络。目前的相关研究主要集中于对热点提取方法及其动态变化的研究,对交通热点的交互作用及其构成的空间交互网络的研究还很少。本文以武汉市的出租车轨迹为数据源,利用基于时空数据场的聚类方法提取城市交通热点区域;基于复杂网络理论与方法,分析城市交通热点区域之间的空间交互作用。通过研究发现：①节假日,热点区域之间的往返交互较多;工作日,热点区域之间的交互较少;②节假日,影响力较大的节点为车站、机场等;工作日,影响力较大的节点是社区和工作地;③社团探测发现,工作日跨越长江的交互较多,非工作日跨越长江的交互较少。上述研究结论可为交通管理部门针对节假日和工作日分别制定不同的交通管理政策和方法提供参考。     

属性和网络结构双重视角下农民工流动规律研究

微观层面的农民工流动与宏观层面的城市间经济联系存在关联性,属性与网络关系结构相结合为分析这种关联性提供了有力工具。运用1142名农民工调查数据和198个城市官方统计数据构建的网络数据,分别分析了属性因素和个体网络以及城市整体网络因素对农民工流动的影响。结果显示：年龄、文化程度、行业类型、打工年限、流出与流入地区域等个体属性因素,以及求职帮助关系人类型、是否有公职人员等个体网络因素对农民工打工地选择、流动距离和工资收入影响显著。通过分析城市属性与整体网络出度入度、网络相关性、无标度特征、核心—边缘结构和小世界特征等因素,得出了农民工流动具有从落后地区流向发达城市,以远距离流动为代价追求高工资,选择务工城市具有扎堆趋势,聚集在发达城市并非必然获得高工资,向发达地区流动倾向于一步到位等结论。在此基础上,提出引导农民工合理流动,降低信息费用,优化劳动力资源配置的相关建议。     

288.15 K-323.15 K下氯化锂、硫酸锂溶液的密度及摩尔体积研究

用振荡管密度计测定了常压下,温度在288.15-323.15 K范围内不同离子强度的LiCl和 Li₂SO₄溶液的密度,计算了两种锂盐在不同温度下的表观摩尔体积,溶液的浓度范围分别为(0.1~18.9) mol·kg-1及(0.03~3.0)mol·kg-1。用Pitzer离子相互作用模型拟合了LiCl和Li₂SO₄不同温度下的的Pitzer单电解质体积参数,模型的计算值与实验值相吻合良好。