各向异性介质的矢量波场分离与应用

针对裂缝各向异性介质,本文提出一种非正交假设下的矢量波场分离方法.本文首先对多分量地震勘探中常见的波型泄漏现象进行了数学描述,提出在纵、横波波场分离的同时应该考虑恢复纵、横波的矢量振幅.为了对裂缝方位角与各向异性系数进行定量预测,本文将矢量波场分离拆分成三个步骤来实施：第一步,用Z、R两分量的仿射坐标系变换分离ZR平面内的P波投影与SV波;第二步,用ZR平面内的P波投影与T分量的仿射坐标系变换分离P波与SH波;第三步,用纯净的SV波与SH波的成像剖面分离快慢横波,并预测裂缝发育参数.模型数据与实际数据的试验结果表明,本文提出的纵、横波波场分离方法能够获得完整的矢量振幅信息,并提供裂缝预测的精度.     

浙江省梅汛期洪涝灾情分析和预测

通过所构设的雨涝强度、雨涝影响面积等统计量来估计灾情，有较高的正确率，能估计出极端情况，为灾害评估工作提供了新的思路。     

体应变地震波最大振幅与地震震级和震中距的统计关系探讨

Based on the body strain record of Tiantanghe station from 2008 to 2014,we make a statistical analysis of the relationship between the maximum amplitude of the body strain record and the surface-wave magnitude,epicenter distance of the earthquakes,which occurred in the Chinese mainland and its surrounding areas with MS≥6. 0 and the rest of the world with MS≥7. 0. According to statistical results,we propose a statistical formula between the surface-wave magnitude of earthquake and the maximum amplitude of the body strain record,the epicenter distance: M_S~*= 0. 37 ln A_max+ 0. 57 ln D + 0. 07. We can also derive a theoretical estimation formula for the maximum amplitude: A_max=e~(2. 7(M_S~*-0. 07))D~(-1. 54). This demonstrates that the maximum amplitude of the body strain record increases exponentially with the increase of the surface-wave magnitude, and decreases with the increase of the epicenter distance,and shows a negative correlation with their product. We further discuss the necessity of adding instruments with high frequency sampling to earthquake monitoring, and dicuss the prospects for precise earthquake prediction in future.     

Nonlinear FE model updating and reconstruction of the response of an instrumented seismic isolated bridge to the 2010 Maule Chile earthquake

Nonlinear finite element (FE) modeling has been widely used to investigate the effects of seismic isolation on the response of bridges to earthquakes. However, most FE models of seismic isolated bridges (SIB) have used seismic isolator models calibrated from component test data, while the prediction accuracy of nonlinear FE models of SIB is rarely addressed by using data recorded from instrumented bridges. In this paper, the accuracy of a state‐of‐the‐art FE model is studied through nonlinear FE model updating (FEMU) of an existing instrumented SIB, the Marga‐Marga Bridge located in Viña del Mar, Chile. The seismic isolator models are updated in 2 phases: component‐wise and system‐wise FEMU. The isolator model parameters obtained from 23 isolator component tests show large scatter, and poor goodness of fit of the FE‐predicted bridge response to the 2010 Mw 8.8 Maule, Chile Earthquake is obtained when most of those parameter sets are used for the isolator elements of the bridge model. In contrast, good agreement is obtained between the FE‐predicted and measured bridge response when the isolator model parameters are calibrated using the bridge response data recorded during the mega‐earthquake. Nonlinear FEMU is conducted by solving single‐ and multiobjective optimization problems using high‐throughput cloud computing. The updated FE model is then used to reconstruct response quantities not recorded during the earthquake, gaining more insight into the effects of seismic isolation on the response of the bridge during the strong earthquake.     

Basin‐scale methods for predicting salmonid spawning habitat via grain size and riffle spacing,tested in a California coastal drainage

Basin‐scale predictive geomorphic models for river characteristics, particularly grain size, can aid in salmonid habitat identification. However, these basin‐scale methods are largely untested with actual habitat usage data. Here, we develop and test an approach for predicting grain size distributions from high resolution LiDAR (Light Detection and Ranging)‐derived topographic data for a 77 km² watershed along the central California Coast. This approach improves on previous efforts in that it predicts the full grain size distribution and incorporates an empirically calibrated shear stress partitioning factor. The predicted grain size distributions are used to calculate the fraction of the bed area movable by spawning fish. We then compare the ‘movable fraction’ with 7 years of observed spawning data. We find that predicted movable fraction explains the paucity of spawning in the upper reaches of the study drainage, but does not explain variation along the mainstem. In search of another morphologic characteristic that may help explain the variation within the mainstem, we measure riffle density, a proxy for physical habitat complexity. We find that field surveys of riffle density explain 64% of the variation in spawning in these mainstem reaches, suggesting that within reaches of appropriate sized gravel, spawning density is related to riffle density. Because riffle density varies systematically with channel width, predicting riffle spacing is straightforward with LiDAR data. Taken together, these findings demonstrate the efficacy of basin‐scale spawning habitat predictions made using high‐resolution digital elevation models. Copyright © 2016 John Wiley & Sons, Ltd.     

Sediment transport in high‐speed flows over a fixed bed: 2. Particle impacts and abrasion prediction

Single bed load particle impacts were experimentally investigated in supercritical open channel flow over a fixed planar bed of low relative roughness height simulating high‐gradient non‐alluvial mountain streams as well as hydraulic structures. Particle impact characteristics (impact velocity, impact angle, Stokes number, restitution and dynamic friction coefficients) were determined for a wide range of hydraulic parameters and particle properties. Particle impact velocity scaled with the particle velocity, and the vertical particle impact velocity increased with excess transport stage. Particle impact and rebound angles were low and decreased with transport stage. Analysis of the particle impacts with the bed revealed almost no viscous damping effects with high normal restitution coefficients exceeding unity. The normal and resultant Stokes numbers were high and above critical thresholds for viscous damping. These results are attributed to the coherent turbulent structures near the wall region, i.e. bursting motion with ejection and sweep events responsible for turbulence generation and particle transport. The tangential restitution coefficients were slightly below unity and the dynamic friction coefficients were lower than for alluvial bed data, revealing that only a small amount of horizontal energy was transferred to the bed. The abrasion prediction model formed by Sklar and Dietrich in 2004 was revised based on the new equations on vertical impact velocity and hop length covering various bed configurations. The abrasion coefficient k_v was found to be vary around k_v ~ 10⁵ for hard materials (tensile strength f_t > 1 MPa), one order of magnitude lower than the value assumed so far for Sklar and Dietrich's model. Copyright © 2017 John Wiley & Sons, Ltd.     

加勒比板块多学科研究综述及其对地震预测的启示

2010年1月12日海地M_W7.0地震打破了Enriquillo断层近240余年的地震平静期, 可能意味着加勒比地区新的活跃周期的到来。 本文通过收集该地区地质构造演化、 地球物理场、 发震构造、 震源物理、 运动学特征及应力场演化等方面的研究成果, 分析由于海地地震的发生所带来的区域地震危险性等相关认识的改变。 通过对多学科资料的梳理, 分析利用多学科研究成果开展加勒比地区地震危险性分析的基本思路, 以期为未来的中国大陆区域动力学模型构建、 地震预测预报研究提供基础参考。     

北斗三号卫星精密定轨中的光压模型研究

对于在轨运行的BDS (BeiDou Navigation Satellite System)卫星, 太阳光压是作用在卫星上主要的非引力摄动. 受多种因素的影响, 太阳光压摄动力难以精确建模, 是BDS卫星精密定轨和轨道预报过程中重要的误差来源. 由于ECOMC (Empirical CODE Orbit Model 1 and 2 Combined)模型兼顾了ECOM1 (Empirical CODE Orbit Model 1)和ECOM2 (Empirical CODE Orbit Model 2)模型的特点, 在模型中引入了较多的待估参数, 使得参数之间存在强相关性. 针对ECOMC模型的这一缺陷, 文中收集了2019年1月至2022年4月武汉大学分析中心提供的BDS-3卫星精密星历, 采用动力学轨道拟合方法得到了ECOMC模型的13个光压参数. 通过对该模型的光压参数进行时间序列分析, 分别给出了BDS-3 IGSO (Inclined Geosynchronous Orbit)和MEO (Medium Earth Orbit)卫星光压模型的参数选择策略. 并利用轨道拟合和轨道预报试验, 验证了光压模型参数选择策略的合理性. 结果表明, 采用改进型ECOMC模型进行BDS-3 IGSO和MEO卫星轨道拟合的效果最佳, 同时, 也能够提升BDS-3 IGSO和MEO卫星中长期轨道预报的精度.     

沉积物粒度组分空间预测的神经网络残余kriging方法

针对近海表层沉积物粒度组分空间变异的尺度差异性,提出了基于广义回归神经网络残余kriging的沉积物粒度组分空间预测方法,并以海州湾沉积物粒度数据为基础,分析了其在沉积物粒度组分空间预测和底质类型制图中的应用效果。结果表明,广义回归神经网络残余kriging方法能够获得比普通kriging方法更高的沉积物粒度组分空间预测精度,并且其底质类型的总体空间预测精度达到85%以上,相应的Kappa系数也在0.8以上,显示底质制图的预测类型与样本的实测类型具有较高的一致性。新方法对于开展定量化的沉积物粒度组分空间预测和底质类型制图具有参考价值。     

2016年8月24日意大利中部MW6.2地震强地面运动特征分析

对意大利国家强震台网在2016年8月24日获得的其中部拉齐奥大区阿库莫利市发生的M_W6.2地震强震动三分向记录进行处理和分析。完成原始数据基线校正、滤波等基本数据处理,回归此次地震动幅值衰减规律,发现其整体与ITA08及BA08的衰减趋势一致,但远场实际值低于预测值,不同场地条件下的衰减特性与ITA10一致,近震源幅值较大,且方向性明显;计算并回归分析几种持时,与全球经验预测方程均基本吻合;比较4个幅值较大的近震源台站的反应谱,发现其明显高于欧洲抗震设计规范中的设计反应谱。结合此次震害特点,该地区在实际建设中仍需提高抗震设防能力,以确保安全性等级。