Spatio-temporal distribution of seismic activity during the Umbria-Marche crisis, 1997

We present the spatio-temporal distribution of more than 2000 earthquakesthat occurred during the Umbria-Marche seismic crisis, between September 26and November 3, 1997. This distribution was obtained from recordings of atemporary network that was installed after the occurrence of the first two largest shocks (Mw =, 5.7, Mw = 6.0) of September 26. This network wascomposed of 27 digital 3-components stations densely distributed in theepicentral area. The aftershock distribution covers a region of about 40 km long and about2 km wide along the NW-SE central Apennines chain. The activity is shallow,mostly located at less than 9 km depth. We distinguished three main zonesof different seismic activity from NW to SE. The central zone, that containsthe hypocenter of four earthquakes of magnitude larger than 5, was the moreactive and the more complex one. Sections at depth identify 40–50^°dipping structures that agree well with the moment tensor focalmechanisms results. The clustering and the migration of seismicity from NW to SE and the generalfeatures are imaged by aftershock distribution both horizontally and at depth.     

2010年4月14日玉树MS7.1地震对余震的触发研究

研究了2010年4月14日青海玉树7.1级地震产生的静态库仑破裂应力变化对余震及区域地震活动空间分布的影响.在考虑震源区附近区域构造应力场的基础上,由震源区构造应力和主震破裂产生的应力叠加,计算得到最容易破裂的余震断层面,进而计算玉树主震在上述余震断层面上产生的库仑破裂静态应力变化.结果表明,库仑应力变化图像与余震分布较为吻合,说明玉树主震对大部分余震有触发作用.利用相同方法计算了玉树主震对周边更大范围内地震的应力触发影响,发现大部分区域地震活动空间分布与库仑应力变化图像基本一致,中小地震大多发生在正向触发区域,但量值较小.对余震断层面与主震完全一致的情形进行了同样的计算,与前述方法计算结果的对比显示,考虑区域应力场的计算方式所得库仑破裂应力变化图像,能够更好地与余震及区域中小地震空间分布图像相吻合.     

The large aftershocks triggered by the 2011 Mw 9.0 Tohoku-Oki earthquake,Japan

The Mw 9.0 Tohoku-Oki earthquake that occurred off the Pacific coast of Japan on March 11, 2011, was followed by thousands of aftershocks, both near the plate interface and in the crust of inland eastern Japan. In this paper, we report on two large, shallow crustal earthquakes that occurred near the Ibaraki-Fukushima prefecture border, where the background seismicity was low prior to the 2011 Tohoku-Oki earthquake. Using densely spaced geodetic observations (GPS and InSAR datasets), we found that two large aftershocks in the Iwaki and Kita-Ibarake regions (hereafter referred to as the Iwaki earthquake and the Kita-Ibarake earthquake) produced 2.1 m and 0.44 m of motion in the line-of-sight (LOS), respectively. The azimuth-offset method was used to obtain the preliminary location of the fault traces. The InSAR-based maximum offset and trace of the faults that produced the Iwaki earthquake are consistent with field observations. The fault location and geometry of these two earthquakes are constrained by a rectangular dislocation model in a multilayered elastic half-space, which indicates that the maximum slips for the two earthquakes are 3.28 m and 0.98 m, respectively. The Coulomb stress changes were calculated for the faults following the 2011 Mw 9.0 Tohoku-Oki earthquake based on the modeled slip along the fault planes. The resulting Coulomb stress changes indicate that the stresses on the faults increased by up to 1.1 MPa and 0.7 MPa in the Iwaki and Kita-Ibarake regions, respectively, suggesting that the Tohoku-Oki earthquake triggered the two aftershocks, supporting the results of seismic tomography.     

Constrained edge dynamic deleting in CD-TIN based on influence domain retriangulation of virtual point

Constrained Delaunay triangulated irregular network is one kind of dynamic data structures used in geosciences. The research on point and edges insertion in CD-TIN is the basis of its application. Comparing with the algorithms of points and constrained edge insertion, there are very a few researches on constrained edge deletion in CD-TIN. Based on the analysis of the polymorphism of constrained edge, virtual points are used to describe the intersection of constrained edges. A new algorithm is presented, called as influence domain retriangulating for virtual point (IDRVP), to delete constrained edges with virtual points. The algorithm is complete in topology. Finally, the algorithm is tested by some applications cases.     

Analysis of aftershock sequences in South and Southeastern Spain

A probabilistic modeling is used to analyze the spatio-temporal behavior of eleven aftershock sequences occurred in South and Southeastern Spain. This study focuses on the analysis of two seismicity parameters: the b-value of the frequency-magnitude distribution, and the p-value, explaining the temporal decay rate of aftershocks. The estimated b values range between 0.77 ± 0.05 and 1.18 ± 0.10 close to the typical b-values of the aftershock frequency-magnitude relationship b ≈ 1.0. The estimated p-values range between 0.75 ± 0.03 and 1.43 ± 0.10 showing broad regimes of the temporal decay of aftershocks. The modified Bath’s law used to analyze the energy partitioning, suggests that a large fraction of the accumulated energy is released in the mainshock and relatively small fraction of energy is released during aftershock sequence, for example 80% of the total energy is released during the Mula 1999 mainshock, 88% during Bullas 2002 mainshock and 87% during La Paca 2005 mainshock. The fractal dimension D₂ is estimated using the correlation integral, and then used to derive the slip ratio, as the ratio of the slip occurred on primary fault segment to the total slip. For example, we obtained a slip ratio equal to 71% for the Mula 1999 aftershock sequence, 61% for the Bullas 2002 event, 58% for the La Paca 2005 aftershock, 50% for the Lorca 2011 sequence and 63% for the sequence triggered by the Gador 2002 mainshock.Finally, the correlations between the fractal dimension, the b-value and the p-value is analyzed, and the Aki’s relation D = 3b/c is discussed as well.     

2010年4月14日玉树Ms7.1地震对余震的触发研究

This paper calculates the static stress changes generated by the Yushu M_S 7. 1 earthquake in Qinghai Province. On the basis of regional stress,we take account of the static stress change triggered by the Yushu M_S 7. 1 earthquake to find the optimally oriented fault planes,then calculate the Coulomb stress change on the optimally oriented fault plane. The results indicate that most of the aftershocks are triggered by the mainshock. The image of Coulomb stress changes is also in accord with regional earthquakes ( M_L ≥3. 0 ) distribution,but the value is lower than 0. 01MPa. In addition,this paper calculates the Coulomb stress changes in the case that the aftershock fault plane is the same as the main shock. Through comparison,we find that the image of Coulomb stress changes obtained using the "optimally oriented fault"approach is more consistent with the distribution of Yushu aftershocks and regional earthquakes.     

余震活动机理研究综述

从介质和应力的不均匀性、力学加载、流体侵入及应力腐蚀、速率-状态依从等几方面对余震活动机理研究进行综述.已有的研究表明,介质和应力的不均匀性是余震产生的基本前提.瞬时蠕变和余滑观点能够从力学的角度解释震后极短时间内余震的快速衰减,而应力松弛过程更有利于解释长时期的余震活动特征.流体侵入及应力腐蚀在一定条件下控制着余震的演化过程.受主震应力扰动影响的断层间的相互作用,始终存在于余震的活动过程之中.各类模型和理论解释都在努力寻求与G-R关系和修改的大森公式这两个统计地震学基本关系的一致性.     

平面上处理科氏力余震效应（续二）

我国大震以走滑型震源占多数,但也有一定数量的逆断层错动和混合型错动的震源。在已研究走滑型震源在平面上处理科氏力余震效应的基础上,文章对逆断层震源和混合型震源在平面上处理科氏力余震效应作分析讨论。     

A high-resolution aftershock seismicity image of the 2002 Sultandaği-Çay earthquake (Mw = 6.2), Turkey

A moderate-size earthquake (Mw = 6.2) occurred on 3 February 2002 (07:11:28 GMT) in the Sultanda??-Çay region of southwest Turkey. The mainshock was followed by a strong aftershock of Mw = 6.0 just 2 h after the mainshock, at 09:26:49 GMT. A temporary seismic network of 27 vertical component seismometers was installed to monitor aftershock activity. One thousand sixty nine aftershocks (0.2 < ML < 3.3) were recorded during the period from 5 to 10 February 2002. We analyzed the P and S arrival times and P wave first motion data to obtain high-quality hypocenters and focal mechanisms, which revealed fine details of the fault zone. We infer that the mainshock has ruptured a segment of the Sultanda? Fault Zone that is approximately 37 km long and 7 km wide at depth. The average slip over the rupture plane during the mainshock is estimated to be 32 cm. The linear distribution of the aftershocks and the location of the mainshock epicenter suggest that rupture has initiated in the eastern bending of the fault and propagated unilaterally to the west. The majority of fault plane solutions indicate E–W to ESE–WNW striking oblique–normal faulting mechanisms with an average dip angle of 62° N ± 10° . The high-resolution aftershock seismicity image also shows that faulting involved a complex array of synthetic and possibly antithetic structures during the evolution of the aftershock sequence. The steady increase of the b value towards the west implies that the highest moment release of the mainshock occurred to the west of the epicenter. The study clearly shows the activation of the WNW–ESE-trending Sultanda? Fault Zone along the southern margin of the Ak?ehir-Afyon Graben (AAG). The westernmost end of the aftershock activity corresponds to a structurally complex zone distinct from the main rupture. It is characterized by both ENE–WSW- and NNE–SSW-trending oblique-slip normal faulting mechanisms, the latter being associated with the NNE–SSW-trending Karam?k Graben. The intersection of these two grabens, AAG and Karam?k Graben, provides abundant faults available for failure in this region. The occurrence pattern of large events in recent years indicates a possible migration of earthquakes from east to west. Thus, we conclude that this has an important implication for earthquake hazard for the city of Afyon, which lies along the same fault line and only 20 km west of the termination point of the aftershock zone.     

2013年甘肃岷县漳县M_S6.6地震余震序列时域衰减特征分析

本文基于补充遗漏地震事件后的地震目录和修正的大森公式,对2013年7月22日甘肃岷县漳县6.6级地震余震序列时间域衰减特征进行了分析.鉴于主震后短时间内目录遗漏的余震较多,首先利用岷县台连续地震记录波形的高频包络差,检测主震后3h内目录遗漏的地震.经检测在主震后3h内共发现目录遗漏的ML1.0以上地震139个,最大震级为ML3.6.主震后1000s内检测到遗漏地震69个,约为目录给出余震数量的6倍.而后使用补充遗漏地震的目录,基于修正的大森公式分别拟合余震频度和余震地震矩随时间的变化.结果显示拟合p值约为1.07,表明岷县漳县地震余震序列衰减速率与全球平均水平接近,而未补充遗漏地震的频度拟合会造成余震序列衰减速率的低估.利用高频包络差直接计算地震频度曲线,通过三种衰减模式对地震频度曲线拟合参数比较,未观察到岷县漳县地震主震后存在早期余震缺失现象.分析认为,加入遗漏地震可以提高余震频度拟合估计衰减速率结果的准确度和精度,若缺少遗漏地震检测结果,则使用地震矩拟合所得衰减速率结果准确度较优,但需充分考虑其精度上的误差.在分析余震序列衰减特征的实际研究工作中,需根据地震目录完整性选择适当的拟合方法.