Surface renewal analysis for sensible and latent heat flux density

High frequency temperature measurements were recorded at five heights and surface renewal (SR) analysis was used to estimate sensible heat flux density (H) over 0.1 m tall grass. Traces of the temperature data showed ramp-like structures, and the mean amplitude and duration of these ramps were used to calculate H using structure functions. Data were compared with H values measured with a sonic anemometer. Latent heat flux density (E) was calculated using an energy balance and the results were compared with E computed from the sonic anemometer data. SR analysis provided good estimates of H for data recorded at all heights but the canopy top and at the highest measurement level, which was above the fully adjusted boundary layer.     

漳州热田的对流热流和传导热流的研究

漳州地热系统属对流型地热系统.漳州热田是我国东南沿海地区目前所见热田中温度最高（121.5℃）的一个.地表热流值的研究表明,热田中心具有最大的实测热流值（359mw/m²）.本文根据热田内152个钻孔的测温资料和56块岩石样品的热导率数据,采用三种不同方法计算出漳州热田及其邻近地区的大地热流值,并讨论了热流值分布的特点.     

A surface complexation model for cadmium and lead adsorption onto diatom surface

This work is devoted to the physico-chemical study of cadmium and lead interaction with diatom–water interfaces for two marine planktonic (Thalassiosira weissflogii = TW, Skeletonema costatum = SC) and two freshwater periphytic species (Achnanthidium minutissimum = AMIN, Navicula minima = NMIN) by combining adsorption measurements with surface complexation modeling. Reversible adsorption experiments were performed at 20 °C after 3 h of exposure as a function of pH, metal concentration in solution, and ionic strength. While the shape of pH-dependent adsorption edge is similar among all four diatom species, the constant-pH adsorption isotherm and maximal binding capacities differ. These observations allowed us to construct a surface complexation model for cadmium and lead binding by diatom surfaces that postulates the constant capacitance of the electric double layer and considers Cd and Pb complexation with mainly carboxylic and, partially, silanol groups. Parameters of this model are in agreement with previous acid–base titration results and allow quantitative reproduction of all adsorption experiments.     

Flotation and depression control of arsenopyrite through pH and pulp redox potential using xanthate as the collector

The role of pH and pulp redox potential (E_H) to control the flotation and depression of arsenopyrite has been investigated through studies on microflotation of arsenopyrite crystals and batch flotation of an arsenopyritic ore using isopropyl xanthate as collector. The transition between flotation and depression of arsenopyrite is established by the reversible potential of the xanthate/dixanthogen couple. Adsorption of arsenate ions on ferric hydroxide has been studied through electrokinetics to delineate mechanisms involved in the depression of arsenopyrite using oxidants. Chemical binding between arsenate species and ferric hydroxide sites on arsenopyrite is suggested as the mechanism responsible for depression of arsenopyrite. E_H conditions are given for the flotation and depression of arsenopyite at various pH values for the arsenopyritic ore.     

The research of phosphorus of Xiangxi River nearby the Three Gorges, China

The Xiangxi River is the first middling tributary of the Changjiang River near the Three Gorges Dam. The River is subject to phosphorus pollution mainly from industrial wastewater. As the water quality of the Xiangxi River could directly influence the water quality of the Three Gorges Reservoir, the research on phosphorus levels and its change in the sediment profile of the Xiangxi River could provide useful information in the dynamic changes in the system, thereby offering options for mitigative measures. Water and sediment samples from lower reaches of Xiangxi River were collected and the different forms of phosphorus in sediments of the Xiangxi River were studied. The concentrations of total phosphorus in sediment ranged from 757.67 to 1438.54 mg/kg. Inorganic phosphorus concentrations ranged from 684.63 to 1055.58 mg/kg. Phosphorus contamination was serious in some parts of the Xiangxi River. With an average concentration of 635.17 mg/kg, calcium-bound phosphorus is the main form among different inorganic phosphorus forms. Labile phosphorus and iron/aluminum-bound phosphorus measured 3.40, 0.05and 35.28 mg/kg, respectively. The mobilization potential of phosphorus of sediments was studied through adsorption and release experiments. The equilibrium concentration of phosphorus adsorption and release was around 0.1 mg/L. The initial concentrations of phosphorus in the overlying water and the sediments have obvious effect on phosphorus mobilization potential. In addition, the release rate of phosphorus in sediment increased with water depth.     

数据备份服务器备份性能分析

针对数据备份服务器备份性能优化问题，分别对实时数据存储与历史数据备份之间的关系、数据备份服务器所备份的数据类型非唯一性、客户数量对备份服务器备份效率的影响三方面进行初步的测试与分析，提出了通过优化数据块的选取、优化数据采集方式、优化备份策略提高备份服务器备份效率的基本方法。     

中国大陆科学钻探工程主孔100～2000 m 放射性产热元素的垂向分布特征及其成因

地球内部放射性产热元素U、Th及K(HPE)含量如何随深度的变化而变化是固体地球科学中的一个重要参数,在限定地壳的热和流变学结构、地球化学、岩石和构造模型中起关键性的作用。对HPE深部分布的认识主要来自于对大型花岗岩岩基的研究及对地表热流值和产热率之间关系的模拟,对高压-超高压变质地体的HPE随深度的分布缺乏认识。在苏鲁超高压变质带中实施的中国大陆科学钻探工程届时将提供超过5km的岩心,为确定苏鲁超高压带的HPE结构提供了最好的机会。对CCSD的100～2000m岩心的732块样品详细的放射性产热元素含量的测试及现今产热率计算的初步结果表明:(1)花岗质片麻岩具有最高的产热率,平均为1665×10-11W/kg;(2)副片麻岩(变沉积岩)具有中等的产热率,为994×10-11W/kg;(3)金红石榴辉岩及石榴石橄榄岩具有最低的产热率,为17×10-11～20×10-11W/kg;(4)放射性产热元素的浓度及相应的产热率随岩性的变化而变化,呈现阶梯状的分布特征。产热率随深度的变化特征表明CCSD主孔中的HPE三明治结构。该结构可能代表着高压-超高压变质地体中的典型HPE结构,比大型花岗岩岩基的HPE结构更复杂,与传统的HPE指数衰减分布模式不吻合。CCSD主孔中所揭示的三明治式HPE结构是大陆被动陆缘中的基性及超基性岩、沉积岩及花岗岩在深