新疆伊宁盆地活动断裂新活动特征研究

新疆伊宁盆地主要分布有巩留南、喀什河、雅马特等6条活动断裂，断裂走向近东西向与北酉一北北西向。其中巩留南断裂、喀什河断裂、雅马特断裂等在晚更新世一全新世时期有过多次显著的新活动，切错了晚更新世一全新世堆积物。在喀什河断裂上1812年发生了8级大展，形成长约100km的地震形变带。在巩留南断裂、雅马特断裂、伊宁断裂上也有受控于断裂近代新活动的中等地震发生。     

长江口海域新生代地层与断裂活动性初探

长江口海域通过浅层人工地震勘察查明，新生代地层可分为5个地震层。分别为第四系、上新统、中新统上段、中新统下段及始新统。第三纪地层自东北向西南依次超覆、减薄尖灭，上部被第四纪地层不整合覆盖。沉积基底主要由晚侏罗世火山岩系及燕山晚期酸性小岩体构成，未发现早第三纪及晚白垩世断陷盆地。断裂构造很发育，按展布方向大体可归为北东、北西及近东西向3组，皆为正断层。前两者数量多、延伸长、断距大，与同区的航磁异常构架吻合。北东向断裂分段明显，西南段为第四纪断裂，中段为晚第三纪断裂，东北段为早第三纪断裂；而北西向断裂分段不很清晰。两者的垂直位移速率平均在0．015mm/a。本文对该海域有关的几个地质问题进行了讨论。     

乌鲁木齐市华凌拟建地下停车场活断层探测与城市活断层探测手段适用性初步分析

根据在乌鲁木齐市拟建华凌地下停车场活断层探测与地震危险性评价工作，对通过乌鲁木齐闹市区的雅玛里克断裂进行了实验性探测。采用了浅层地震探测、地质雷达探测、地形测量和坑探剖面方法，对这些手段的适用性进行了初步分析和讨论。     

论如何审核确定抗震设防要求

为使县级以上地震部门做好审核建设工程抗震设防要求工作，介绍了确定抗震设防要求的4个依据、程序、重大重要建设工程的划分依据、活动断裂分类与分级规定等。指出，确定抗震设防要求既是一项法定的行政审批工作，又是一项严谨的科学技术工作。     

广梧高速公路(马安-河口段)地震地质稳定性评价

由于工程需要，对广梧高速公路(马安—河口段)的地震地质情况进行了考察，马安—河口路段所处大地构造性质为东南地洼区，穿越了三个次级构造分区：白土断陷、思劳断隆、云浮断隆。路段附近发育3条断裂：肇庆断裂、河口断裂和吴川—四会断裂。前两者为非活动断裂，后者为活动断裂且星北东向从思劳附近穿过，是未来5．0级地震发生地段，烈度可达Ⅵ度。但路段附近地震活动水平较低，仅发生过4以—5．0级地震4次，最大烈度为Ⅴ度。白诸立交、河口立交的地震地质环境稳定，思劳立交基本稳定，沿线不易产生滑坡与崩塌。     

Characteristics of Tectonic Deformation and Mechanisms for the Active Maxianshan-Xinglongshan Fault System in the Lanzhou Area

A detailed investigation permitted us to obtain quantitative data concerning fine geometric structures of 4 faults of the active Maxianshan-Xinglongshan fault system and the latest movement along them. Of them the northern Maxianshan border fault is a large-scale, strongly active Holocene reverse sinistral strike-slip fault, the other 3 faults, the southern Maxianshan border fault and the southern Xinglongshan border and the northern Xinglongshan border faults are the accompanying active late-Pleistocene thrust faults, which are incorporated into the main strike-slip fault, the northern Maxianshan border fault at depth. It is the most important earthquake-controlling fault in the Lanzhou area, the fault influences and constrains the seismic activity in the area.     

论构造耦合作用

构造耦合作用是一种普遍存在的地质现象。现今东、西太平洋的构造差异及古太平洋和现今太平洋大陆边缘构造差异与俯冲的洋壳板块性状有关,即:①俯冲角度;②俯冲角度的改变;③俯冲速率;④俯冲速率的改变;⑤俯冲深度;⑥俯冲板块前缘与海沟间的水平距离;⑦俯冲板块在670km上、下地幔界线处的构造形态;⑧俯冲板块的位移及位移方向。这种深部构造活动对浅部构造形成的制约和影响,是活动大陆边缘构造耦合现象的具体表现。中国西北部的盆山耦合现象是大陆内部的构造耦合作用,印度板块与欧亚板块碰撞产生的远距离效应,导致中亚地区产生陆内A型俯冲,A型俯冲是造成盆地消亡、山系形成的重要因素。     

岩石断裂作用的复杂性和混沌动力学

断裂是一个复杂的动力学体系,受到岩石结构、反应、流体迁移、应力、岩石变形和力学等多种地质因素和过程的耦合控制。本文建立了断裂体系的反应-输运-力学耦合动力学模型并编制了模拟程序。以湖南水口山矿区为例,通过动力学模拟表明不同地层岩性的断裂渗透率大小和演化特征存在显著差异,断裂作用促使岩石渗透率的空间非均匀性增强,从而有利于流体的局部汇聚和矿体的形成。断裂中压力随时间呈现出非周期振荡变化,反映了断裂演化的混沌特征。     

The tectonic regime in Italy inferred from borehole breakout data

In Italy, the horizontal stress directions are well constrained in many regions, but the tectonic regime is not well known because the stress magnitudes are unknown. Our intention is to improve the knowledge of crustal stress in Italy, both at shallow depth and in low seismicity areas. Therefore, we inferred the tectonic regime from the comparison between the depth of breakout occurrence and the physical properties of the rocks in 20 boreholes. The critical value of the maximum horizontal stress, for which the effective tangential stress at the borehole wall overcomes the rock strength to form breakouts, could be computed from rock strength and density. Comparing the theoretical stress distributions for different tectonic regimes with the depth distribution of breakout occurrence, it is possible to infer the tectonic regime that fits best to the breakout depth distribution. We investigated boreholes up to 6 km deep located in different tectonic environments over the Italian peninsula: the Po Plain, the Apenninic chain, the Adriatic foredeep and the Tyrrhenian Quaternary volcanic region. These wells are characterised by breakout data of good quality (A, B and C, according to World Stress Map quality ranking system). The results are in general agreement with the style of faulting derived from earthquake focal mechanisms and other stress indicators. Our results show a predominance of a normal faulting (NF) regime in the inner Apennines and both normal faulting and strike–slip faulting (SS) style in the surrounding regions, possibly also associated with changes in the tectonic regime with depth.     

Architecture of fault zones determined from outcrop, cores, 3-D seismic tomography and geostatistical modeling: example from the Albalá Granitic Pluton, SW Iberian Variscan Massif

The 3-D seismic tomographic data are used together with field, core and well log structural information to determine the detailed 3-D architecture of fault zones in a granitic massif of volume 500×575×168 m at Mina Ratones area in the Albalá Granitic Pluton. To facilitate the integration of the different data, geostatistical simulation algorithms are applied to interpolate the relatively sparse structural (hard) control data conditioned to abundant but indirect 3-D (soft) seismic tomographic data. To effectively integrate geologic and tomographic data, 3-D migration of the velocity model from the time domain into the depth domain was essential. The resulting 3-D model constitutes an image of the fault zone architecture within the granitic massif that honours hard and soft data and provides an evaluation of the spatial variability of structural heterogeneities based on the computation of 3-D experimental variograms of Fracture Index (fault intensity) data. This probabilistic quantitative 3-D model of spatially heterogeneous fault zones is suitable for subsequent fluid flow simulations. The modeled image of the 3-D fault distribution is consistent with the fault architecture in the Mina Ratones area, which basically consists of two families of subvertical structures with NNE–SSW and ENE–WSW trends that displaces the surfaces of low-angle faults (North Fault) and follows their seismically detected staircase geometry. These brittle structures cut two subvertical dykes (27 and 27′ Dykes) with a NNE–SSW to N–S trend. The faults present high FI (FI>12) adjacent bands of irregular geometry in detail that intersect in space delimiting rhombohedral blocks of relatively less fractured granite (FI<6). Both structural domains likely correspond with the protolith and the damaged zone/fault core in the widely accepted model for fault zone architecture. Therefore, the construction of 3-D grids of the FI in granitic areas affected by brittle tectonics permits the quantitative structural characterization of the rock massif.