新疆塔中南坡奥陶系的地层缺失和沉积相变化

按照奥陶系内部6个组沉积的时间片段拟定塔中南坡不同区块存在不同程度的缺失。部分关键层段的牙形石和几丁虫组合特征证明一间房组和恰尔巴克组在塔中部分井区是存在的,但恰尔巴克组的分布范围最狭窄。总体上,塔中南坡隆起区地层缺失较多,古城墟隆起基本完整。据缺失状况和岩相展布,显示塔中南坡的沉积单元具有由东往西迁移的特征,且各时段迁移的距离与速度存在较大差异。     

A GPR study of subsidence-creep-fault processes in Morelia, Michoacán, Mexico

In 1983, inhabitants of the City of Morelia, Michoacán, Mexico, began to observe a series of differential settlements causing damages to constructions along linear trends parallel to a system of regional faults. The same phenomenon occurs in others cities of the Mexican Volcanic Belt (MVB), such as Celaya, Aguascalientes, and Querétaro, and is linked to a structurally controlled subsidence, caused by groundwater withdrawal, and the presence of geological faults. We define this subsidence type as Subsidence-Creep-Fault Processes (SCFP), based on the necessary elements for their generation, and we studied them through geophysical and geotechnical techniques. In Morelia, the geophysical investigations have been carried out using ground-penetrating radar (GPR). GPR profiles, perpendicular to the axis of the surface fault generated by the SCFP were carried out. The common-offset single-fold profiling was used, with a central frequency of 50 MHz. In all cases it has been possible to visualize a fault plane dividing two blocks, the presence of synthetic and antithetic faults, influence zones from 20 m to 40 m, and a maximum “net throw” of 4 m. Exploration trenches followed the same direction of the profiles obtained with GPR (perpendicular to the axis of the surface fault). These trenches exposed a fault plane dividing two blocks with different lithology, generating a maximum “net throw” of 4.40 m; as well they help in the determination of influence zones that varied from 14 m to 40 m.     

桃山铀矿田桃山断裂及其保矿作用

桃山铀矿田位于江西省中部,断裂构造发育,既有成矿构造,也有保矿构造,其中斜贯桃山矿田的桃山断裂即是一保矿构造,它形成于车免近时期,走向北东,倾向南东,右行正断,并具铰链断层性质,上盘地块掀斜下落,致使上盘成矿壳层向NW和NE倾斜,由于倾末端的侵蚀深度较小,保矿条件较好,加强这些地带的铀矿勘查和评价具有重要意义。     

Influence of Structural Non-Stationarity of Surface Roughness on Morphological Characterization and Mechanical Deformation of Rock Joints

Summary Structural non-stationarity of surface roughness affects accurate morphological characterization as well as mechanical behaviour of rock joints at the laboratory scale using samples with a size below the stationarity threshold. In this paper, the effect of structural non-stationarity of surface roughness is investigated by studying the scale dependence of surface roughness and mechanical behaviour of rock joints. The results show that the structural non-stationarity mainly affects the accurate characterization of the surface roughness of the fracture samples. It also controls the amount and location of the contact areas during shear tests, which in turn affects the mechanical properties and asperity degradation of the samples. It is concluded that for accurate determination of the morphological and mechanical properties of rock joints at laboratory and field scales, samples with size equal to or larger than the stationarity threshold are required. Author’s address: Nader Fardin, Rock Mechanics Group, Department of Mining Engineering, Faculty of Engineering, University of Tehran, P.O. Box: 11365/4563, Tehran, Iran     

Ground motion estimation during the Kashmir earthquake of 8th October 2005

In this article, analytical methods have been used to estimate ground motion during the 8 October 2005, Kashmir earthquake. Peak ground acceleration (PGA) values at several stations in the epicentral region have been estimated by empirical analytical source mechanism models. As an alternate analysis, PGA estimates have also been obtained using the stochastic finite fault seismological model. The estimated PGAs are compared with that obtained from damage values. A PGA contour map in the near-source region is provided. It is found that very near to the epicenter, PGA would have reached more than 1 g. It is demonstrated that empirical analytical models can be effectively used to estimate ground motion due to rupture of active faults.     

柴达木盆地北缘侏罗系两类不同有机质丰度泥岩的 生物标志物特征对比研究

在柴达木盆地北缘地区,分别选取有机碳含量很低和较高的侏罗系泥岩样品,对比分析了它们在生物标志物组成上的差异。结果发现,高有机质丰度泥岩的生标组成与我国西北地区侏罗纪煤系有机质的特征差异不大,相比而言,低有机质丰度泥岩的正烷烃以前主峰为特征,Pr/Ph比值在1.0左右,三环萜烷和伽马蜡烷丰度较高,并在部分样品中检出了25 降藿烷系列。结合泥岩的有机岩石学特征,认为这些差异可能反映了泥岩沉积环境和生烃母质的不同:高有机质丰度泥岩的有机显微组分以相对弱还原条件下的形态有机质为主,包括藻类体、孢子体和角质体等,而低有机质丰度泥岩的有机显微组分以相对强还原条件下的矿物沥青基质为主,其母质可能来源于低等显微菌藻类。进一步通过对比不同有机质丰度泥岩,以及区内原油生标组成之间的相互关系,讨论了研究区的油源问题。     

三峡库区生基包滑坡监测及成果分析

生基包滑坡监测属于三峡库区奉节县三期地质灾害监测预警项目之一,该滑坡位于长江左岸,临近人口稠密的安坪乡集镇,地理位置重要。三峡水库175 m蓄水后,其变形破坏特征有何表现？对航道安全运营有无潜在威胁？是否会对滑坡体上的重要建筑及村民生产生活构成危害？针对这些问题,首先分析了滑坡的工程地质特征及主要的影响因素;其次,确立以4种监测手段为主、人工巡查为辅的监测方案;通过对大地变形GPS、深部位移、滑坡推力等几种监测方法的运用及对其成果进行分析研究,以实例说明其在滑坡监测中的应用;再次,结合宏观人工巡查进行对照分析,以充分说明大地变形、深部位移和滑坡推力监测在实际运用中的可行性;最后,根据监测结论提出对生基包滑坡防治的建议。     

长江三角洲北翼J9孔揭示地层和古地磁特征

长江三角洲北翼地区缺少较长尺度的第四纪海陆变迁及环境演变的深入探讨,深达423m的海安县基岩标J9孔为此提供了较好的研究对象。通过观察该孔松散层岩心,总结其沉积特征,认为岩心可明显地划分为6个特征岩性段。同时,地层古地磁测试结果显示:0～200m为布容正极性世,200～334m为松山负极性世,334m以下为高斯正极性世。综合分析岩心沉积特征并参考古地磁测试结果对地层进行了初步划分,认为:0～39m为全新世地层,39～153m为晚更新世地层,153～200m为中更新世地层,200-334m为早更新世地层,之下为新近纪地层。地层中存在晚更新世晚期特征的硬粘土标志层,指示本地不是冰后期古河谷的发育地。     

青藏高原北缘阿尔金走滑边界的侧向扩展——甘肃北山晚新生代走滑构造与地壳稳定性分析

对北山地区遥感影像和野外地质特征的分析表明,自阿尔金断裂带向NW方向依次出露三危山-双塔断裂、大泉断裂和红柳河断裂。这些断裂近于平行,且同为左行走滑断裂,具有相似的展布特征,空间走向均为NE40-50°,断裂系末端均发育“树枝状”分支断层．在断层夹块之间形成“多米诺”构造,构成了北山地区主要的构造样式。断层谷地沉积物分析和断层泥ESR年代学测试结果表明,三危山-双塔断裂形成于上新世（N2k）,大泉断裂形成于早更新世（1．2-1．5Ma）．而北山地区分支断层和次级断层的活动在400ka之后。对北山地区断裂构造几何学和年代学的研究表明．阿尔金断裂系晚新生代以来向NW方向的侧向扩展．是阿尔金走滑边界重要的生长方式。北山地区特殊的走滑构造组合样式．使该地区的构造变形难于在某条断层上聚集能量,而分散在若干条次级断层上的位移量又微乎其微,该地区成为“最稳定的活动区”。     

阿尔金南缘构造带西段辉绿岩墙群的地球化学特征及构造环境

对阿尔金南缘构造带西段辉绿岩墙群的岩石学和地球化学的详细研究表明,该区辉绿岩墙群为拉斑系列岩石,其主量元素以中等TiO2(1.19%～1.59%)、高MgO(5.51%～7.88%)、贫K2O(0.04%～0.84%)和P2O5(0.10%～0.20%)、Na2OK2O为特征;高场强元素(HFSE)丰度特征显示其为E-MORB型或过渡型玄武岩质岩石;稀土元素总量相对较高,轻重稀土元素分馏不显著[(La/Yb)N=1.93～3.61,LREE/HREE=3.01～4.10],在球粒陨石标准化配分模式图上呈略富集型.结合玄武岩构造环境判别图解综合分析推测,它们可能形成于一种裂谷向MORB环境过渡的构造环境,即初始小洋盆构造环境.