Modeling of Rayleigh waves dispersion in the Sannio region (Southern Italy) from seismic active refraction data

Short period surface waves, recorded during a seismic refractionsurvey in the Sannio region (Southern Italy), have been modeled to infera shallow velocity model for the area. Based on the decrease of resolutionwith depth, due to the bias on group velocity estimates arising frominterference of the Rayleigh waves with higher modes, we carried out aprocedure of fitting, with synthetic seismograms, of selected filtered traceswith a gaussian filter, having a width at half height equal to 1 Hz and acentral frequency lying in the range [1,4] Hz. We estimated the likelihoodbetween synthetic and observed seismograms by measuring their semblance.In this way we were able to infer a more refined local velocity modelcharacterized by a high Vp and Vs vertical gradient in the sedimentarycover. Two ad hoc resolution studies, based on group velocity andamplitude data respectively, indicate that the local velocity model is a goodvelocity model also for the entire studied area. The increase in the numberof available data when using amplitude information allows us to make amore selective choice in the model parameter space (Vp and Vs of eachlayer) and to solve for the Vp/Vs ratio. The inferred Vp velocity in thehalf-space is equal to 2.8 km/s. This value is in excellent agreement withthat inferred by other authors (3 km/s) by modeling P-wave travel timevs. distance. The best-fit model furnish low Vp/Vs for the sedimentarycover so indicating a high degree of the sediment's compaction in thestudied area. The inferred shallow high-velocity gradient indicates thatthe shallow sedimentary layer in the area could trap and focus the energytraveling into it.     

Comparison of the Langrangian Footprint

We compare flux and concentration footprint estimates of athree-dimensional Lagrangian stochastic dispersion modelapplying backward trajectories with the results of ananalytical footprint model by Kormann and Meixner.The comparison is performed for varying stability regimesof the surface layer as well as for different measurementheights. In general, excellent correspondence is found.     

UNIVERSALITY OF THE LAGRANGIAN VELOCITY STRUCTURE FUNCTION CONSTANT (C0) ACROSS DIFFERENT KINDS OF TURBULENCE

In this paper, we evaluate the Lagrangian velocity structure function constant, C0, in the inertial subrange by comparing experimental diffusion data and simulation results obtained with applicable Lagrangian stochastic models. We find in several different flows (grid turbulence, laboratory boundary-layer flow and the atmospheric surface layer under neutral stratification) the value for C0 is 3.0 ± 0.5. We also identify the reasons responsible for earlier studies having not reached the present result.     

多标度分形与地球化学场分解

在地球化学叠加场内，不同时期、不同规模的地质作用形成的地球化学景观具有不同的分形标度区间和分维。利用多标度分形方法把黑龙江省团结沟金矿外围的叠加地球化学场分解成了分别与北东向和北面向构造相对应的地球化学正常场和异常场，并在此基础上，讨论了地球化学场的演化。     

判定地下水二维水动力弥散参数的直线图解法

弥散参数的求得，是正确认识地下水污染运移及对其控制的前提。本文根据极值理论和非线性方程线性化手段，导出了浓度和时间变化的线性关系，得出了确定弥散参数的直线图解法。它可以弥补其它方法的不足。借用实际弥散试验资料对其进行了检验，表明所建数学模型与实际模型之间吻合良好，即所求得的参数结果可信。     

Optimal weighting in the finite difference solution of the convection-dispersion equation

Oscillation and numerical dispersion limit the reliability of numerical solutions of the convection-dispersion equation when finite difference methods are used. To eliminate oscillation and reduce the numerical dispersion, an optimal upstream weighting with finite differences is proposed. The optimal values of upstream weighting coefficients numerically obtained are a function of the mesh Peclet number used. The accuracy of the proposed numerical method is tested against two classical problems for which analytical solutions exist. The comparison of the numerical results obtained with different numerical schemes and those obtained by the analytical solutions demonstrates the possibility of a real gain in precision using the proposed optimal weighting method. This gain in precision is verified by interpreting a tracer experiment performed in a laboratory column.     

巴林左旗-阿鲁科尔沁旗5.9级地震前地震活动异常特征

对2003年8月16日巴林左旗阿鲁科尔沁旗间5．9级地震前震源区附近地震活动图像和地震学参数研究结果表明，震前5～1年震源区附近地震活动异常平静，而外围(150km≤△≤300km)区地震活动显著增强；震前2年左右，震源区附近地震学参数异常比较明显，异常项数比40％；震前1．0～0．5年地震学参数异常明显减弱，异常项数比仅10％。可见，地震学短期异常不明显。     

A Simple Parameterisation for Flux Footprint Predictions

Flux footprint functions estimate the location and relative importance of passive scalar sources influencing flux measurements at a given receptor height. These footprint estimates strongly vary in size, depending on receptor height, atmospheric stability, and surface roughness. Reliable footprint calculations from, e.g., Lagrangian stochastic models or large-eddy simulations are computationally expensive and cannot readily be computed for long-term observational programs. To facilitate more accessible footprint estimates, a scaling procedure is introduced for flux footprint functions over a range of stratifications from convective to stable, and receptor heights ranging from near the surface to the middle of the boundary layer. It is shown that, when applying this scaling procedure, footprint estimates collapse to an ensemble of similar curves. A simple parameterisation for the scaled footprint estimates is presented. This parameterisation accounts for the influence of the roughness length on the footprint and allows for a quick but precise algebraic footprint estimation.     

Use of microtremor measurement for assessing site effects in Northern Belgium – interpretation of the observed intensity during the MS = 5.0 June 11 1938 earthquake

To provide quantitative information on site effects in the northern part of Belgium, forty-seven H/V microtremor measurements were performed with 5 second seismometers over an area of about 15.000 km². Most of the results show a northward regular increase of the fundamental period in agreement with the augmentation of the Mesozoic and Cainozoic soft sedimentsthickness from a few meters 40 km south of Brussels to 900 m at the Netherlands-Belgium border. The measured resonance frequency values wereconsistent with theoretical computations performed at different sites onthe basis of existing information and shallow seismic experiments. At oneparticular site (Uccle) where borehole data were available, microtremor measurements using an array of four seismological stations with differentapertures allowed to obtain the low frequency part of the Rayleigh wave dispersion curve, extending the range covered by the analysis of surfacewaves artificially generated. The Vs profile derived from the surface waveinversion corroborates the 1 Hz natural frequency of the site. Comparison of these results with the macroseismic information concerning the M_S = 5.0 1938 earthquake which occurred 50 km west of Brussels,confirmed the hypothesis that the geological structure of the Brabant massifis likely to control damage distribution during such an earthquake. Comparisonbetween the intensity map of the 1938 earthquake and the resonance period ofsediments obtained by our microtremor study shows a clear relation betweenthe two parameters. During the 1938 earthquake, site effects played a prominent role due to the dimension of the source whose corner frequency wasabout 1 Hz.     

Field vibration mitigation by honeycomb WIB for pile foundations of a high-speed train viaduct

Environmental vibrations from recent high-speed trains are becoming a special concern in the civil and environmental engineering field since they can give detrimental effects to residents, sensitive equipments and high-tech production facilities in the vicinity of train tacks. Herein, aiming at the vibration mitigation for a specific high-tech industrial area, the low-frequency vibrations from a train viaduct are targeted over an anticipated range. A theoretically designed innovative countermeasure, called honeycomb wave impeding barrier (WIB) for a wave impeding barrier, is introduced and its effects are investigated by computer simulation. The present WIB is based on the wave dispersion phenomenon that can modulate the incoming wavelengths into the shorter wavelengths, creating an apparent wave cut-off characteristic in the wave field across WIB installation area. The shorter wavelengths are further impeded due to the impedance ratio of the WIB walls and in-fill materials and absorbed by the in-fills more. The three-dimensional FEM simulation demonstrates a dramatic reduction effect that is difficult to achieve by conventional measures.