Lithostratigraphic position and petrographic characteristics of R.A.T. (“Roches Argilo-Talqueuses”) Subgroup, Neoproterozoic Katangan Belt (Congo)

The Neoproterozoic Katangan R.A.T. (“Roches Argilo-Talqueuses”) Subgroup is a sedimentary sequence composed of red massive to irregularly bedded terrigenous-dolomitic rocks occurring at the base of the Katangan succession in Congo. Red R.A.T. is rarely exposed in a continuous section because it was affected by a major layer-parallel décollement during the Lufilian thrusting. However, in a number of thrust sheets, Red R.A.T. is in conformable sedimentary contact with Grey R.A.T which forms the base of the Mines Subgroup. Apart from the colour difference reflecting distinct depositional redox conditions, lithological, petrographical and geochemical features of Red and Grey R.A.T. are similar. A continuous sedimentary transition between these two lithological units is shown by the occurrence of variegated to yellowish R.A.T. The D. Strat. “Dolomies Stratifiées” formation of the Mines Subgroup conformably overlies the Grey R.A.T. In addition, a transitional gradation between Grey R.A.T. and D. Strat. occurs in most Cu–Co mines in Katanga and is marked by interbedding of Grey R.A.T.-type and D. Strat.-type layers or by a progressive petrographic and lithologic transition from R.A.T. to D. Strat. Thus, there is an unquestionable sedimentary transition between Grey R.A.T. and D. Strat. and between Grey R.A.T. and Red R.A.T.The R.A.T. Subgroup stratigraphically underlies the Mines Subgroup and therefore R.A.T. cannot be comprised of syn-orogenic sediments deposited upon the Kundelungu (formerly “Upper Kundelungu”) Group as suggested by Wendorff (2000). As a consequence, the Grey R.A.T. Cu–Co mineralisation definitely is part of the Mines Subgroup Lower Orebody, and does not represent a distinct generation of stratiform Cu–Co sulphide mineralisation younger than the Roan orebodies.     

Polymorphic phase transition in Superhydrous Phase B

We synthesized superhydrous phase B (shy-B) at 22 GPa and two different temperatures: 1200°C (LT) and 1400°C (HT) using a multi-anvil apparatus. The samples were investigated by transmission electron microscopy (TEM), single crystal X-ray diffraction, Raman and IR spectroscopy. The IR spectra were collected on polycrystalline thin-films and single crystals using synchrotron radiation, as well as a conventional IR source at ambient conditions and in situ at various pressures (up to 15 GPa) and temperatures (down to −180°C). Our studies show that shy-B exists in two polymorphic forms. As expected from crystal chemistry, the LT polymorph crystallizes in a lower symmetry space group (Pnn2), whereas the HT polymorph assumes a higher symmetry space group (Pnnm). TEM shows that both modifications consist of nearly perfect crystals with almost no lattice defects or inclusions of additional phases. IR spectra taken on polycrystalline thin films exhibit just one symmetric OH band and 29 lattice modes for the HT polymorph in contrast to two intense but asymmetric OH stretching bands and at least 48 lattice modes for the LT sample. The IR spectra differ not only in the number of bands, but also in the response of the bands to changes in pressure. The pressure derivatives for the IR bands are higher for the HT polymorph indicating that the high symmetry form is more compressible than the low symmetry form. Polarized, low-temperature single-crystal IR spectra indicate that in the LT-polymorph extensive ordering occurs not only at the Mg sites but also at the hydrogen sites.     

Prediction of creep characteristic of rock under varying environment

The strain developed due to creep is mainly proportional to the logarithm of the time under load, and is mostly proportional to the stress and temperature. At higher temperature the creep rate falls slowly with respect to time, and the creep strain is proportional to a fractional power of time, with the exponent increasing as the temperature increases and reaching a value approximately one-third at temperatures of about 0.5°C. At these temperatures, the creep increases with stress according to a power greater than unity and possibly exponentially. It increases with temperature as (−U/kT), where U is an activation energy and k is Boltzman’s constant. There are different methods to determine the creep strain and the energy of Jog (B) including experimental methods, multivariate regression analysis, and by numerical simulation. These methods are less cumbersome and time consuming. In the present investigation, artificial neural network technique has been used for prediction of the creep strain and energy of Jog (B). Two different networks have been tested and validated. Both the networks have four input neurons and one hidden layer with five neurons, and one output neuron. The data for different rocks at temperatures up to 750°C under conditions of compressive or tortional stress are taken from the literatures. The training and testing data sets used were 163 and 14, respectively. To deal with the problem of overfitting of data, Bayesian regulation has been used and network is trained with suitable training epochs. The coefficients of correlation among the predicted and observed values are found high and they improve the confidence of the users. The mean absolute percentage error obtained are also very low.     

基于空间技术实测数据的板块构造运动研究

将ITRF2008解算结果 GPS、SLR、VLBI实测站速度信息和北美CORS网络、中国陆态网络、欧洲CORS网络站速度信息进行基准统一,联合解算IERS组织划定的全球14个主要大陆板块的欧拉矢量,对原有的板块运动参数进行精化;提出了基于最小二乘法的海量台站选择方法,实验结果表明,该台站选取方法能够有效提高海量台站的筛选效率和可靠性。稳定台站的数量越多,分布越均匀,越能够体现板块运动的现势性。     

基于FY3A/MERSI资料分析广东省气溶胶光学厚度分布

利用国产极轨气象卫星FY3A的MERSI AOD产品分析2010—2013年广东省气溶胶光学厚度的分布规律。结果表明:MERSI AOD产品与地面太阳光度计实测数据的相关系数为0.72,其平均绝对值误差为0.12,均方根误差为0.15,数据精度可满足研究需要;从AOD的空间分布看,珠三角西翼东翼山区五市,其中佛山市、东莞市、中山市为广东省AOD均值最高的地区,梅州市、河源市为广东省AOD均值最低的地区;从AOD的时间分布看,2010—2013年间,AOD呈现先升高后降低的趋势,2011年为拐点,与此同时,AOD还表现出明显的季节变化特征,春季为AOD高值期,夏季、秋季次之,冬季最低。     

同化FY3B/IRAS资料对GRAPES分析场影响诊断

GRAPES(Globe and Regional Assimilation and Prediction System)变分系统能够同化常规资料和非常规卫星资料,这些被同化的资料究竟对同化系统得到的分析场有何影响,目前国内外尚未见相关的研究文献。为此,首次采用基于信息熵信号自由度思想,诊断风云三号B星(FY3B)红外分光计(Infrared Atmospheric Sounder,IRAS)资料对GRAPES分析场的影响。诊断过程中,采用数值逼近方法,统计2012年12月24日18时到2013年1月22日00时共114个时次IRAS资料对GRAPES分析场影响,结果表明,IRAS中高层通道亮温资料对GRAPES分析场影响比地表通道20观测亮温的影响大,地表通道8和9观测亮温对分析场影响较大。前24个GRAPES变分同化时次每个时次IRAS通道亮温对分析场影响的贡献率分析结果显示,高层通道和H_2O通道贡献率较大。个例分析结果表明,在同化探空资料基础上加入IRAS资料后,温度和湿度增量场变化幅度较大,表明IRAS资料对分析场有降温和增湿作用。     

CINRAD/SA(B)发射机高压打火组件级故障诊断

新一代天气雷达技术保障中,发射机高压负载打火导致的综合故障的诊断和定位是比较复杂的,具有故障点多、故障涉及组件多、故障修复时间长等特点,是新一代天气雷达故障维修的难点。依据发射机高压控制和监控信号流程,提出了发射机高压打火组件级故障诊断流程。通过发射机组件级故障诊断流程快速修复发射机高压负载打火综合故障过程,表明发射机高压打火组件级故障诊断流程在雷达维修中具有规范化和适用性维修效果,进一步显示出故障分析诊断流程在新一代天气雷达技术保障中的重要作用。     

基于 GAMA 平台的多智能体应急疏散仿真模型

应急疏散的研究对象是一个复杂的社会系统,利用多智能体模型可以有效模拟人群复杂的社会行为。将多智能体模型应用于应急疏散领域,设计5种类型的智能体实体,构建多智能体应急疏散仿真模型,从被疏散个体的相互作用行为入手,研究整个被疏散群体的行为特征。基于GAMA平台,实现以矢量地理空间数据为基础的多智能体应急疏散仿真模型,通过仿真实验,动态呈现整个应急疏散过程。对灾害、突发事件应急疏散指挥,应急疏散设施建设、城市规划设计等工作具有重要的意义。     

经验加速度补偿对HY-2A卫星精密定轨的影响

针对HY-2A卫星定轨中存在系统误差的问题,该文提出了加入经验加速度补偿系统误差。为了获得HY-2A卫星的高精度轨道,采用星载DORIS距离变率数据探索了经验加速度对定轨精度的影响。探讨了1d、3d和7d作为经验加速度周期的定轨精度差异,分析了3d作为经验加速度周期时在径向、法向和切向3个方向设置经验加速度对定轨精度的不同影响。研究结果表明:HY-2A卫星在径向和切向不存在系统误差,而在法向存在系统误差,因而在法向设置经验加速度进行力学模型补偿能够取得较好的定轨结果;3d作为经验加速度的补偿周期较为合适,不仅能够减少解算参数个数,缩短计算时间,而且径向定轨精度可达到1.00cm,满足HY-2A卫星精密定轨需求。     

基于浮标数据的卫星雷达高度计海浪波高数据评价与校正

卫星雷达高度计是海浪有效波高（significant wave height,SWH）观测的重要手段之一,本文利用时空匹配方法对T/P、Jason-1、Envisat、Jason-2、Cryosat-2和HY-2A共6颗卫星雷达高度计SWH数据与NDBC（National Data Buoy Center,NDBC）浮标SWH数据进行对比验证,并对雷达高度计SWH数据进行校正。全部卫星雷达高度计SWH数据时间跨度为1992年9月25日到2015年9月1日,对比验证NDBC浮标共53个,包括7个大洋浮标。精度评价发现除T/P外,各卫星雷达高度计SWH的RMSE都在0.4~0.5 m之间,经过校正后,RMSE都有显著下降,下降程度最大为13.82%;对于大洋浮标,评价结果RMSE在0.20~0.28 m之间,结果明显优于全部NDBC浮标的精度评价结果;HY-2A卫星雷达高度计SWH在经过校正后数据质量与国外其他5颗卫星雷达高度计SWH数据质量差异较小。