Design of a 3D Chirp Sub-bottom Imaging System

Chirp sub-bottom profilers are marine acoustic devices that use a known and repeatable source signature (1–24 kHz) to produce decimetre vertical resolution cross-sections of the sub-seabed. Here the design and development of the first true 3D Chirp system is described. When developing the design, critical factors that had to be considered included spatial aliasing, and precise positioning of sources and receivers. Full 3D numerical modelling of the combined source and receiver directivity was completed to determine optimal source and receiver geometries. The design incorporates four source transducers (1.5–13 kHz) that can be arranged into different configurations, including Maltese Cross, a square and two separated pairs. The receive array comprises 240 hydrophones in 60 groups whose group-centres are separated by 25 cm in both horizontal directions, with each hydrophone group containing four individual elements and a pre-amplifier. After careful consideration, it was concluded that the only way to determine with sufficient accuracy the source–receiver geometry, was to fix the sources and receivers within a rigid array. Positional information for the array is given by a Real Time Kinematic GPS and attitude system incorporating four antennas to give position, heading, pitch and roll. It is shown that this system offers vertical positioning accuracy with a root-mean-square (rms) error less than 2.6 cm, while the horizontal positioning rms error was less than 2.0 cm. The system is configured so that the Chirp source signature can be chosen by software aboard the acquisition vessel. The complete system is described and initial navigational and seismic data results are presented. These data demonstrate that the approach of using fixed source-receiver geometry combined with RTK navigation can provide complete 3D imaging of the sub-surface.     

Modelling linear wave transformation induced by dissipative structures—Random waves

The relevant theory is presented and numerical results are compared with the analytical solution for the interaction of non-breaking waves with an array of vertical porous circular cylinders on a horizontal bed. The extension to the cases of unidirectional and multidirectional waves is obtained by means of a transfer function. The influence of the mechanical properties of porous structures and wave irregularity on wave transformation is analysed. Results for unidirectional and multidirectional wave spectra are compared to those obtained for regular waves. The model presented reproduces well the analytical results and provides a tool for analysing several engineering problems.     

注射生物胺对凡纳滨对虾鳃丝离子转运酶活力和血淋巴渗透压的影响

本文研究了注射生物胺(多巴胺、5-羟色胺)对凡纳滨对虾(Litopenaeus vannamei)离子转运酶活力和渗透压的影响。结果表明:注射生物胺(DA、5-HT)对凡纳滨对虾鳃丝总AT- Pase、Na -K -ATPase、V-ATPase活力的影响均显著(P<0．05)．而对HCO3--ATPase活力和渗透压的影响不显著(P>0．05),而对照组渗透生理指标无明显变化。注射DA组AT- Pase、Na -K -ATPase活力在6h内呈峰值变化,分别在1h、3h达到最大值,在6-12h时稳定在对照组水平,12h后逐渐升高,于36h时达到最大值后降低,而V-ATPase活力在实验时间内呈阶段式升高现象,在36h达最大值后降低;注射5-HT组ATPase、Na -K -ATPase活力随取样时间增加而降低．至9h达到最小值,9h后趋于稳定,V-ATPase活力在48h内与对照组差异不显著。注射DA、5-HT处理组血淋巴渗透压分别在6h、9h内呈明显的峰值变化．分别在1h、6h达到最大值,然后分别在6h、9h后趋于稳定,并恢复至对照组水平。     

台风"杜鹃"影响期间福建大风天气的特点及成因

台风“杜鹃”影响期间，福建大风天气出现的比较早，而且范围比较大．本文通过对天气尺度的环境场、具有代表性的单站资料的对比分析，寻求大风出现的原因．还深入利用MM5模式对台风的气压场、风场、流场等进行数值模拟，分析结果表明台湾地形倒槽的形成对此次大风天气出现有着重要的作用，此外从流场分型的角度进一步分析台湾地形倒槽的形成原因．     

合浦珠母贝二倍体、三倍体和非整倍体群体的基因杂合度与生长比较

采用淀粉凝胶电泳方法对合浦珠母贝Pinctadamartensi(D.)雌性三倍体与雄性二倍体交配,细胞松弛素B抑制其受精卵第一极体释放产生的二倍体、三倍体及非整倍体3个群体进行了同工酶研究。二倍体、三倍体及非整倍体群体在6个多态位点的平均基因杂合度分别为0.255±0.087,0.286±0.097,0.275±0.089,三倍体的杂合度高出二倍体约12%,表明多倍体诱导能增加诱导群体的杂合度。但在单个位点上,三倍体的杂合度不一定高于二倍体;在各自群体内,平均杂合位点数与生长间无明显的相关性,单个位点上的杂合子也未完全表现出其生长大于纯合子,且差异不明显(p>0.05)。因此,合浦珠母贝三倍体的快速生长难以完全用杂合度增高假说解释,只能说明诱导处理能使三倍体的杂合度增高,而能量再分配和"巨型性"可能对其快速生长起着不可忽视的作用。非整倍体群体的杂合度高于二倍体群体,但其生长却小于二倍体,其原因可能是染色体的增减对机体的生长有一定的影响。     

溴素的有机化学──I．2，4，6－三溴苯甲酸溴代和非溴代芳酯的合成

用ｍ－氨基苯甲酸作原料，经溴代、重氮化、还原脱氨、酰氯化和酯化反应等步骤，合成了六种新型的三溴苯甲酸的溴代和非溴代芳酯，即；双（２，４，６－三溴苯甲酸）－２＇，３＇，５＇，６＇－四溴－１＇，４＇－苯二酯，２，４，６－三溴苯甲酸－２＇，３＇，４＇，５＇，６＇－五溴苯酯，２，４，６－三溴苯甲酸－２＇，４＇，６＇－三溴苯酯，２，４，６－三溴苯甲酸－４＇－溴苯酯，２，４，６－三溴苯甲酸－４＇－甲基苯酯和２，４，６－三溴苯甲酸苯酯．通过对产物中碳、氢、溴元素的定量分析以及红外吸收光谱和氢核磁共振谱的研究，验证了合成产物的结构。     

长江口三维潮流数值计算及动力分析

采用三维动力学数学模型对长江口潮流场进行了计算，对长江口潮流流态在一个潮周期内逐时进行了分析，并对长江口南支盐水倒灌从动力学角度进行了初步探讨。计算结果表明：文中模型较好地重演长江口潮流场，可以用于大型复杂河口工程实际中的潮流场的计算和分析。     

4-溴苯甲酸-2,3,4,5,6-五溴苯酯的合成(英文)

以苯酚和4—溴苯甲酸为原料,合成一种尚未见文献记载的新化合物——4—溴苯甲酸—2,3,4,5,6—五溴苯酯,用无水三氯化铝催化苯酚的全溴化。此产物可望在阻燃剂方面得到应用。     

藓羽藻(Bryopsis hypnoides)核酮糖-1，5-二磷酸羧化酶／加氧酶的分离与活性测定

采用硫酸铵分部沉淀与凝胶过滤的方法，进行藓羽藻Rubisco的分离研究。结果表明，分离的藓羽藻Rubisco经SDS-聚丙烯酰胺凝胶电泳检测呈两条清晰条带，分别为Rubisco大亚基与小亚基；与菠菜相比，藓羽藻Rubisco大亚基分子量与菠菜基本相同，而小亚基较之稍大一些。藓羽藻Rubisco活力测定结果表明，Rubisco分离过程中用硫酸铵分部沉淀后活力降低许多，分离后活力有所上升，但仍比粗提液活力弱；在Rubisco活力测定过程中，藓羽藻Rubisco的活化温度与其它物种Rubisco活化的温度不同，在低温下活化效果较好。这些结果说明Rubisco的酶活力受硫酸铵的影响而且藓羽藻Rubisco相对陆地高等植物结构不稳定。