Modélisation géométrique 3D des granites stéphaniens du massif du Pelvoux (Alpes,France)

The structural analysis and the 3D modelling of Stephanian granites of the Pelvoux Massif characterize an emplacement along sinistral NW–SE- and dextral NE–SW-trending shear zones in the Pelvoux and in the Aiguilles Rouges–Mont Blanc Massifs, respectively. This Carboniferous shear system is consistent with a north–south extension direction known in the whole Variscan belt at this time. To cite this article: P. Strzerzynski et al., C. R. Geoscience 337 (2005).     

Analysis of rock structure stability in coal mines

In this paper, the theory of limit point instability is used to analyse the stability of rock structures in coal mines. A general method of analysing stability of rock structures is put forward and a uniform instability condition of rock structures is set up. Some instability phenomena, such as rock bursts in circular roadways, pillars and long walls, and the outburst of coal and gas from circular roadways, are discussed analytically. At a later stage, the critical point of rock structure instability is determined. The influence of relative parameters (such as the mechanical properties of rock, coal, and the geometric sizes) on the stability of the rock structures is carefully analysed. Copyright © 2005 John Wiley & Sons, Ltd.     

泥石流运动衰减动力学初步研究

我国公路泥石流病害严重，泥石流淤埋公路构建筑物是一类常见的公路泥石流病害类型。泥石流衰减动力学是防治泥石流淤埋病害的重要关键技术，也是泥石流运动学、动力学研究的核心问题之一。本文作者运用泥沙运动力学及流体力学原理，初步建立了泥石流固相颗粒和液相浆体的能量衰减条件，把泥石流衰减模式概化为两类，即能量抑制衰减和能量自由衰减；通过泥石流沉积模型试验，得到了不同粘度泥石流体的沉积扇变化形态，随着泥石流体粘度的增大，沉积扇边缘变陡、扩展范围变小、纵轴线长度减小等结论与实际情况吻合；初步建立了泥石流能量衰减速率计算方法。研究成果为防治公路泥石流病害奠定了基础。     

Intraplate deformation and 3D rheological structure of the Rhine Rift System and adjacent areas of the northern Alpine foreland

The lithosphere of the Northern Alpine foreland has undergone a polyphase evolution during which interacting stress-induced intraplate deformation and upper mantle thermal perturbations controlled folding of the thermally weakened lithosphere. In this paper we address relationships among deeper lithospheric processes, neotectonics and surface processes in the Northern Alpine foreland with special emphasis on tectonically induced topography. We focus on lithosphere memory and neotectonics, paying special attention to the thermo-mechanical structure of the Rhine Graben System and adjacent areas of the northern Alpine foreland lithosphere. We discuss implications for mechanisms of large-scale intraplate deformation and links with surface processes and topography evolution.     

Experimental determination of argon solubility in silicate melts: An assessment of the effects of liquid composition and temperature

The argon solubility of 38 liquids in the system Na₂O-CaO-MgO-Al₂O₃-SiO₂ (NCMAS) has been determined at 1873 K and 1 bar, the argon concentration of presaturated glasses being measured using a static mass spectrometer. For compositions in the subsystem diopside (CaMgSi₂O₆), nepheline (NaAlSiO₄), albite (NaAlSi₃O₈), anorthite (CaAl₂Si₂O₈), argon solubility is generally a linear function of the relative proportion of each end member, solubility being lowest in diopside melt (1.53 10⁻⁵ cm³ STP · g⁻¹ · bar⁻¹) and highest in albite melt (2.88 10⁻⁴ cm³ STP · g⁻¹ · bar⁻¹). For the tectosilicate joins studied (SiO₂-Na₂Al₂O₄, SiO₂-CaAl₂O₄, SiO₂-MgAl₂O₄) solubility decreases with decreasing silica content in all cases, being highest for Na-bearing liquids and lowest for Mg-bearing liquids at constant molar silica content. Where comparison is possible our results are in good agreement with data from the literature. When our data are considered in isolation we find that argon solubility shows an excellent correlation with calculated ionic porosity. The covariation of argon solubility and liquid density is also reasonable, that with molar volume less convincing and that with polymerization state (as defined by the ratio of the number of nonbridging oxygens and tetrahedral network forming cations; NBO/T) nonexistent. However, when our data are combined with those from the literature no well constrained correlation between argon solubility and ionic porosity is apparent. Based upon this observation and consideration of the temperature dependence of noble gas solubility it is concluded that ionic porosity is not a universally applicable parameter which may be used to predict noble gas solubility as a function of composition, temperature and pressure. Two new models for calculating argon solubility are proposed, both employing the notion of partial molar argon solubilities. The first uses oxide components, for which partial molar argon solubility is directly proportional to partial molar ionic porosity calculated at 1873 K, irrespective of the temperature of experimental equilibration. The second model, which offers the best fit to the available data, employs tetrahedral units rather than oxides as the proposed melt components. This latter model successfully accounts for reported argon solubilities in simple Al-free systems, in simple Al-bearing systems and in natural liquids. This is interpreted to infer that argon is incorporated in large sites in the liquid structure (such as the space within rings of n-tetrahedra) although further work is required to understand the quantitative links between melt structure and noble gas solubility.     

Environmental significance of C/C and O/O ratios of modern land-snail shells from the southern great plains of North America

¹³C/¹²C and ¹⁸O/¹⁶O ratios of aragonite shells of modern land snails from the southern Great Plains of North America were measured for samples from twelve localities in a narrow east-west corridor that extended from the Flint Hills in North Central Oklahoma to the foothills of the Sangre de Cristo Mountains in Northern New Mexico, USA. Across the study area, shell δ¹⁸O values (PDB scale) ranged from −4.1‰ to 1.2‰, while δ¹³C values ranged from −13.2‰ to 0.0‰. δ¹⁸O values of the shell aragonite were predicted with a published, steady state, evaporative flux balance model. The predicted values differed (with one exception) by less than 1‰ from locality averages of measured δ¹⁸O values. This similarity suggests that relative humidity at the time of snail activity is an important control on the δ¹⁸O values of the aragonite and emphasizes the seasonal nature of the climatic information preserved in the shells. Correlated δ¹³C values of coexisting Vallonia and Gastrocopta suggest similar feeding habits and imply that these genera can provide information on variations in southern Great Plains plant ecology. Although there is considerable scatter, multispecies, transect average δ¹³C values of the modern aragonite shells are related to variations in the type of photosynthesis (i.e., C₃, C₄) in the local plant communities. The results of this study emphasize the desirability of obtaining isotope ratios representing averages of many shells in a locale to reduce possible biases associated with local variations among individuals, species, etc., and thus better represent the “neighborhood” scale temporal and/or spatial environmental variations of interest in studies of modern and ancient systems.     

基于城市体系的长江三角洲旅游地域系统研究

首先分析了长江三角洲旅游资源的分布格局及长三角旅游发展的整体性现状，认为长三角旅游整体发展的协调性不足。然后从城市体系与区域旅游整体发展耦合的角度出发，引入了长江三角洲城市体系的规模结构、空间结构、交通网络结构和城市群内部经济联系的分析研究，并以此划分出了长三角两个层次的旅游地域系统，给出了长三角地域旅游城市网络体系的空间组织。最后提出了长三角区域旅游产业联动发展的对策和建议。     

体绘制技术在地学3D GIS 可视化中的应用研究

体绘制技术是目前科学计算可视化研究的一个重要组成部分，对地质体内部属性分布的可视化有重要意义。该文针对地学研究中几何建模和属性建模同样重要的特点，基于一种矢栅一体化的混合数据模型，对地质体表面采用三角面片描述几何形状，对地质体内部采用基于八叉树的自适应网格剖分技术描述内部属性特征。对网格剖分后的体数据，采用体元投射的体绘制技术进行地质体内部属性可视化，显示出很好的效果，具有实际应用意义。     

云南沿边境地带生态环境3S监测、 评价与调控研究

本文利用全球新千年整体生态系统评估的理论，以云南省沿边境地带生态系统变化跨境生态安全为研究对象，探寻并揭示我国陆疆系统的跨境生态系统变化监测、评价和生态安全综合调控的基础理论与信息机理；进而研究基于“3S”云南沿边境地带的生态环境监测、评价与综合调控的方法和关键技术，包括方法和技术体系的建立、指标体系的建立、多尺度效应和尺度转换、数学模型的建立、综合调控模式和决策方案的建立等；在案例研究部分，建立了背景数据库，然后选择大、中、小尺度进行了全区生态环境现状评价，重点河道、典型路段和重点口岸的影响评价和预测预报研究，最后进行了综合调控模式和方案的探讨，并对研究结果进行了动态仿真和虚拟表达研究。     

Investigation into the effect of fault properties on wave transmission

The estimation of wave transmission across the fractured rock masses is of great importance for rock engineers to assess the stability of rock slopes in open pit mines. Presence of fault, as a major discontinuity, in the jointed rock mass can significantly impact on the peak particle velocity and transmission of blast waves, particularly where a fault contains a thick infilling with weak mechanical properties. This paper aims to study the effect of fault properties on transmission of blasting waves using the distinct element method. First, a validation study was carried out on the wave transmission across a single joint and different rock mediums through undertaking a comparative study against analytical models. Then, the transmission of blast wave across a fault with thick infilling in the Golgohar iron mine, Iran, was numerically studied, and the results were compared with the field measurements. The blast wave was numerically simulated using a hybrid finite element and finite difference code which then the outcome was used as the input for the distinct element method analysis. The measured uplift of hanging wall, as a result of wave transmission across the fault, in the numerical model agrees well with the recorded field measurement. Finally, the validated numerical model was used to study the effect of fault properties on wave transmission. It was found that the fault inclination angle is the most effective parameter on the peak particle velocity and uplift. Copyright © 2017 John Wiley & Sons, Ltd.