青藏高原及邻近区域的S波三维速度结构

本文收集了WWSSN台网和我国台网中13个地震台站的长周期地震记录,用140条10-90s瑞利波频散曲线和作者提出的Tarantola-Backus面波频散层析成象方法,作了青藏高原及邻区的速度反演,得出该地区岩石层速度结构的三维图象.结果表明,1.在10-110km深度范围内,速度结构出现与大地构造特征相关的分区性,显示出四个构造单元:青藏块体、柴达木-巴颜喀拉-三江块体、塔里木块体和印度块体.2.高原内部,深度为10-70km内速度较低,莫霍界面呈不对称盆形分布,藏北那曲附近地壳厚度超过70km,高原边缘壳厚为45-50km,90-110km为高速异常,表明高原内部存在上地幔盖层.3.高原北部的班公湖断裂和东部的三江断裂系是该区重要的分界线,是岩石层结构存在明显差异的重要接触部位,可能是冈瓦纳古陆与欧亚古陆的缝合带.4.柴达木-巴颜喀拉-三江块体内部速度分布不均匀,地壳厚度由北向南从45km加深到60km;在深度90-110km存在一低速层.5.塔里木地块内速度随深度均匀增加,从地壳到上地幔110km内没有发现低速层.地壳厚度约50km.     

Crustal structure at the easternmost termination of the Variscan belt based on CELEBRATION 2000 and ALP 2002 data

The eastern margin of the Variscan belt in Europe comprises plate boundaries between continental blocks and terranes formed during different tectonic events. The crustal structure of that complicated area was studied using the data of the international refraction experiments CELEBRATION 2000 and ALP 2002. The seismic data were acquired along SW–NE oriented refraction and wide-angle reflection profiles CEL10 and ALP04 starting in the Eastern Alps, passing through the Moravo-Silesian zone of the Bohemian Massif and the Fore-Sudetic Monocline, and terminating in the TESZ in Poland. The data were interpreted by seismic tomographic inversion and by 2-D trial-and-error forward modelling of the P waves. Velocity models determine different types of the crust–mantle transition, reflecting variable crustal thickness and delimiting contacts of tectonic units in depth. In the Alpine area, few km thick LVZ with the Vp of 5.1 km s^− 1 dipping to the SW and outcropping at the surface represents the Molasse and Helvetic Flysch sediments overthrust by the Northern Calcareous Alps with higher velocities. In the Bohemian Massif, lower velocities in the range of 5.0–5.6 km s^− 1 down to a depth of 5 km might represent the SE termination of the Elbe Fault Zone. The Fore-Sudetic Monocline and the TESZ are covered by sediments with the velocities in the range of 3.6–5.5 km s^− 1 to the maximum depth of 15 km beneath the Mid-Polish Trough. The Moho in the Eastern Alps is dipping to the SW reaching the depth of 43–45 km. The lower crust at the eastern margin of the Bohemian Massif is characterized by elevated velocities and high Vp gradient, which seems to be a characteristic feature of the Moravo-Silesian. Slightly different properties in the Moravian and Silesian units might be attributed to varying distances of the profile from the Moldanubian Thrust front as well as a different type of contact of the Brunia with the Moldanubian and its northern root sector. The Moho beneath the Fore-Sudetic Monocline is the most pronounced and is interpreted as the first-order discontinuity at a depth of 30 km.     

Comments on ‘A comparative study of ANN and neuro-fuzzy for the prediction of dynamic constant of rockmass’

Singh et al (2005) examined the potential of the ANN and neuro-fuzzy systems application for the prediction of dynamic constant of rockmass. However, the model proposed by them has some drawbacks according to fuzzy logic principles. This discussion will focus on the main fuzzy logic principles which authors and potential readers should take into consideration.     

不整合运移通道类型及输导油气特征

在对不整合空间结构特征研究的基础上,提出了油气沿不整合运移的通道类型:宏观上,存在由不整合面之上底砾岩和不整合面之下半风化岩石两种高效运载层组合成的双运移通道型和单运移通道型两种通道类型;微观上,底砾岩连通孔隙、半风化岩石构造卸荷风化裂缝系统及溶蚀孔洞系统可作为油气运移的主要通道。通过对不整合面上、下岩石物性分析,认为半风化岩石“孔洞缝”系统较底砾岩连通孔隙有更高的输导油气的能力。研究结果表明,不同的运移通道类型具有不同的输导油气特征。在地史时期,构造裂缝系统和溶蚀孔洞系统一直是不整合输导油气的主要通道;对于软地层构成的不整合来说,开始应是卸荷、风化裂缝系统和底砾岩连通孔隙共同构成不整合输导油气的主要通道,当上覆沉积载荷达到一定程度后,主要是底砾岩连通孔隙起输导油气通道作用;对于脆硬地层构成的不整合来说,卸荷、风化裂缝系统和底砾岩连通孔隙一直是不整合输导油气的主要通道。     

蒙古塔木察格坳陷白垩系震积岩特征及其地质意义

通过岩芯观察,结合构造背景研究,在蒙古塔木察格坳陷白垩纪地层中识别出震积岩。震积岩的主要标志有微同沉积断裂、同沉积塑性变形构造、液化脉、震积枕状及伴生构造等。通过对塔219 井、塔1943 井等岩芯的系统观察,建立了蒙古塔木察格坳陷白垩系震积岩的垂向序列。震积岩的垂向序列自下而上依次为砂岩脉（砂火山）层段、水塑性褶皱变形层段、斧式构造层段、滑塌构造层段、阶梯状微断层和震裂缝层段、准原地沉积湖泊津浪丘状层理和内碎屑角砾岩层段、异地沉积震浊积岩层段,对应于地震由强变弱的一个变化过程。震积岩的发现具有重要的研究意义,有助于分析盆地边界断裂的强烈活动时期。     

鄂尔多斯盆地东缘煤储层微孔隙结构特征及其影响因素

在对鄂尔多斯盆地东缘58套采自不同层位不同地域煤样显微组分测试和低温液氮比表面测试的基础上,从比表面积、吸附曲线形态、阶段孔径结构分布、阶段孔径比表面积贡献、FHH分形特征几个方面刻画了煤储层微孔隙特征。同时,就“孔比表面积—孔隙结构—煤物质组成与化学结构”这一因果链,分析了鄂尔多斯盆地东缘煤微孔隙特征与煤变质程度、煤岩显微组分以及矿物组分与类型的关系。研究发现,Ro在0.60%~1.91%范围内,比表面积及FHH分形分维数先明显降低,Ro至1.3%后又略有回升,同时吸附回线“滞后环”及分形尺度对应的压力范围明显减小,孔径3~4 nm“墨水瓶”型孔明显减少乃至消失,并成为比表面积减少的主要贡献者。在相似煤级条件下,惰质组分较镜质组分有更多的比表面积贡献。粘土矿物组分含量>10%时,孔径3~4 nm“墨水瓶”型孔对比表面贡献明显,且随煤级增高影响作用相对加大。     

Development of a 3D GIS and its application to karst areas

There is a growing interest in modeling and analyzing karst phenomena in three dimensions. This paper integrates geology, groundwater hydrology, geographic information system (GIS), database management system (DBMS), visualization and data mining to study karst features in Huaibei, China. The 3D geo-objects retrieved from the karst area are analyzed and mapped into different abstract levels. The spatial relationships among the objects are constructed by a dual-linker. The shapes of the 3D objects and the topological models with attributes are stored and maintained in the DBMS. Spatial analysis was then used to integrate the data in the DBMS and the 3D model to form a virtual reality (VR) to provide analytical functions such as distribution analysis, correlation query, and probability assessment. The research successfully implements 3D modeling and analyses in the karst area, and meanwhile provides an efficient tool for government policy-makers to set out restrictions on water resource development in the area.     

The double solid reactant method: II. An application to the shallow groundwaters of the Porto Plain,Vulcano Island (Italy)

This paper presents an example of application of the double solid reactant method (DSRM) of Accornero and Marini (Environmental Geology, 2007a), an effective way for modeling the fate of several dissolved trace elements during water–rock interaction. The EQ3/6 software package was used for simulating the irreversible water–rock mass transfer accompanying the generation of the groundwaters of the Porto Plain shallow aquifer, starting from a degassed diluted crateric steam condensate. Reaction path modeling was performed in reaction progress mode and under closed-system conditions. The simulations assumed: (1) bulk dissolution (i.e., without any constraint on the kinetics of dissolution/precipitation reactions) of a single solid phase, a leucite-latitic glass, and (2) precipitation of amorphous silica, barite, alunite, jarosite, anhydrite, kaolinite, a solid mixture of smectites, fluorite, a solid mixture of hydroxides, illite-K, a solid mixture of saponites, a solid mixture of trigonal carbonates and a solid mixture of orthorhombic carbonates. Analytical concentrations of major chemical elements and several trace elements (Cr, Mn, Fe, Ni, Cu, Zn, As, Sr and Ba) in groundwaters were satisfactorily reproduced. In addition to these simulations, similar runs for a rhyolite, a latite and a trachyte permitted to calculate major oxide contents for the authigenic paragenesis which are comparable, to a first approximation, with the corresponding data measured for local altered rocks belonging to the silicic, advanced argillic and intermediate argillic alteration facies. The important role played by both the solid mixture of trigonal carbonates as sequestrator of Mn, Zn, Cu and Ni and the solid mixture of orthorhombic carbonates as scavenger of Sr and Ba is emphasized.

Mobilization analysis of the dolmen of Dombate (Northwest Spain)

This paper presents an analysis of the mobilization of the dolmen of Dombate, a megalithic monument situated in the Northwest of Spain. The study is founded on simple static principles, with the application of basic concepts of soil mechanics (soil reactions were computed by the reaction modulus method) and rock mechanics (a simple secant approach was adopted to model the contact between orthostats). In addition, a simplified geometric model for dolmens was adopted. On the basis of these concepts, a numerical solver able to provide quick estimations of the system's mobilization was developed. Using this tool, a number of sensitivity analyses were conducted to estimate the mobilization that could be caused by a conservation project currently under consideration. It was found that mobilization might be excessive, and therefore, a safer procedure is proposed. In short, this paper puts forth a new rational approach for archaeological practices which may help to estimate the possible consequences of excavations and rehabilitations on megalithic structures.     

Stable isotope study of the Archaean rocks of the Vredefort impact structure,central Kaapvaal Craton,South Africa

The Vredefort dome in the Kaapvaal Craton was formed as a result of the impact of a large meteorite at 2.02 Ga. The central core of Archaean granitic basement rocks is surrounded by a collar of uplifted and overturned strata of the Witwatersrand Supergroup, exposing a substantial depth section of the Archaean crust. Orthogneisses of the core show little variation in whole-rock δ ¹⁸O value, with the majority being between 8 and 10‰, with a mean of 9.2‰ (n = 35). Quartz and feldspar have per mil differences that are consistent with O-isotope equilibrium at high temperatures, suggesting minimal interaction with fluids during subsequent cooling. These data refute previous suggestions that the Outer Granite Gneiss (OGG) and Inlandsee Leucogranofels (ILG) of the core represent middle and lower crust, respectively. Granulite-facies greenstone remnants from the ILG have δ ¹⁸O values that are on average 1.5‰ higher than the ILG host rocks and are unlikely, therefore, to represent the residuum from the partial melting event that formed the host rock. Witwatersrand Supergroup sedimentary rocks of the collar, which were metamorphosed at greenschist-to amphibolite-facies conditions, generally have lower δ ¹⁸O values than the core rocks with a mean value for metapelites of 7.7‰ (n = 45). Overall, through an ∼20 km thick section of crust, there is a general increase in whole-rock δ ¹⁸O value with increasing depth. This is the reverse of what is normal in the crust, largely because the collar rocks have δ ¹⁸O values that are unusually low in comparison with metamorphosed sedimentary rocks worldwide. The collar rocks have δD values ranging from −35 to −115‰ (average −62‰, n = 29), which are consistent with interaction with water of meteoric origin, having a δD of about −25 to −45‰. We suggest that fluid movement through the collar rocks was enhanced by impact-induced secondary permeability in the dome structure. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.