Influence of dietary n-3 LC-PUFA on growth,nutritional composition and immune function in marine fish Sebastiscus marmoratus

A 60-day feeding experiment was conducted to investigate the influence of dietary omega-3 long-chain polyunsaturated fatty acids(n-3 LC-PUFA) on growth, nutritional composition and immune function of marine fish Sebastiscus marmoratus. Five diets containing 3.6, 10.2, 18.2, 26.5, or 37.0 g/kg n-3 LC-PUFA were prepared. The results reveal significant influences of dietary n-3 LC-PUFA on the final weight, weight gain, specific growth rate, feed conversion ratio, and condition factor. As dietary n-3 LCPUFA increased, weight gain and specific growth rate increased and were significantly higher in groups fed 18.2, 26.5 and 37.0 g/kg than in groups fed 3.6 and 10.2 g/kg( P 0.05); there was no significant difference between groups fed 18.2, 26.5, or 37.0 g/kg( P 0.05). With increasing dietary n-3 LC-PUFA, eicosapentaenoic acid and docosahexenoic acid content in muscle and liver increased significantly, immunoglobulin class M content gradually increased from 9.1 to 14.8 μg/L, and lysozyme activity content increased from 1355 to 2268 U/mL. Broken line model analysis according to weight gain indicated that a dietary n-3 LC-PUFA level of 18.2 g/kg is essential for normal growth at a fat level of 125 g/kg. Therefore, appropriate dietary n-3 LC-PUFA not only promote growth and improve the n-3 LC-PUFA content, but also enhance immune function in S. marmoratus.     

��ɽ���Ѵ���ά����Ӧ��������ֵģ��

????????????????????????????棬??????????????????????????????????????????GPS???????????????????????????M≥5.0????????????????????????????????????????????????Ч???????XY?????????????????????????????????????????????????????????????????????????ο???????????     

基于OSM Buildings生成WebGIS三维建筑日照阴影模型

随着WebGIS和图形学技术的发展,三维GIS已经成为GIS领域的主流,但现阶段发展三维GIS受成本和网速等影响,限制了三维GIS广泛运用。本文供述在ArcGIS Server平台下以HTML5为技术,运用OSM Buildings插件在Canvas渲染出建筑物三维日照阴影模型,简化WebGIS三维可视化的难度。     

Trophic ecology of Pomatoschistus microps within an intertidal bay (Roscoff,France), investigated through gut content and stable isotope analyses

The diet of Pomatoschistus microps has been studied using both gut content and stable isotope analyses. In the Roscoff Aber Bay (Brittany, France), this fish is commonly found on sandy muddy intertidal flats. Gut content analyses were also interpreted using trophic indices. Owing to the large diversity of prey consumed, these indices emphasised the opportunistic feeding behaviour of P. microps. Here, this species fed mainly on endofauna with meiofauna being of high relative importance. The main biotic components of its trophic habitat, characterized by δ¹³C and δ¹⁵N, provided evidence of a major trophic pathway based on drift Enteromorpha sp. Trophic positions estimated by both diet analyses and isotopic analyses led to similar results. In this bay, P. microps is a first‐order predator with a low degree of omnivory. Despite a preferential consumption of the amphipod Corophium arenarium, we assumed that this goby behaves as a generalist feeding on a uniform variety of endofauna taxa.     

Morphology,sedimentary infill and depositional environments of the Early Quaternary North Sea Basin (56°–62°N)

The North Sea Basin has been subsiding during the Quaternary and contains hundreds of metres of fill. Seismic surveys (170 000 km²) provide new evidence on Early Quaternary sedimentation, from about 2.75 Ma to around the Brunhes-Matuyama boundary (0.78 Ma). We present an informal seismic stratigraphy for the Early Quaternary of the North Sea, and calculate sediment volumes for major units. Early Quaternary sediment thickness is > 1000 m in the northern basin and >700 m in the central basin (total about 40 000 km³). Northern North Sea basin-fill comprises several clinoform units, prograding westward over 60 000 km². Architecture of the central basin also comprises clinoforms, building from the southeast. To the west, an acoustically layered and mounded unit (Unit Z) was deposited. Remaining accommodation space was filled with fine-grained sediments of two Central Basin units. Above these units, an Upper Regional Unconformity-equivalent (URU) records a conformable surface with flat-lying units that indicate stronger direct glacial influence than on the sediments below. On the North Sea Plateau north of 59°N, the Upper Regional Unconformity (URU) is defined by a shift from westward to eastward dipping seismic reflectors, recording a major change in sedimentation, with the Shetland Platform becoming a significant source. A model of Early Quaternary sediment delivery to the North Sea shows sources from the Scandinavian ice sheet and major European rivers. Clinoforms prograding west in the northern North Sea Basin, representing glacigenic debris flows, indicate an ice sheet on the western Scandinavian margin. In the central basin, sediments are generally fine-grained, suggesting a distal fluvial or glacifluvial origin from European rivers. Ploughmarks also demonstrate that icebergs, derived from an ice sheet to the north, drifted into the central North Sea Basin. By contrast, sediments and glacial landforms above the URU provide evidence for the later presence of a grounded ice sheet.     

南疆开都河流域夏季径流量的变化及其特征分析

利用RegCM3模式对开都河流域2000-2006年夏季气候进行模拟,结果表明:模式对于流域夏季月降水总量和月平均气温的空间分布有较好的模拟能力。结合站点海拔高度值、实测值以及模拟量分别对降水、气温进行修正,并由此计算流域的面雨量和平均温度;结果表明开都河流域夏季面雨量与开都河同期实测径流量有较好的一致性,R~2达到0.97。对开都河流域夏季平均气温、面雨量以及径流量的分析表明,降水是影响流域夏季径流量的主要影响因子;而气温对于径流呈现负贡献的原因可能由于对温度敏感的小冰川大大减少,致使径流量随着温度增加而增加的关系减弱。此外,气温升高导致流域蒸散量的提高,可能是气温呈现负贡献的又一原因。     

一次强沙尘暴的近地层气象要素及内部热力、动力结构特征

针对2009年4月23-24日出现在我国内蒙古中西部的一次强沙尘暴天气过程,利用专门组织观测实验得到的加密探空资料、地面自动观测站资料和其他常规观测资料,深入分析研究了此次沙尘暴发生前后及发生期间,近地层气象要素变化及其内部热力、动力结构特征变化.结果表明,1）沙尘暴发生前,大气的温度垂直递减率大,湿度较大,近地层风速小,风向偏东;在沙尘暴发生期间,大气中出现逆温现象,大气湿度很小,各层风速明显增强,风向偏西且稳定;之后,低层温度显著下降,大气湿度迅速增大,各层风速减小,沙尘暴天气结束.2）沙尘暴发生前,大气层结是条件不稳定的,在沙尘暴过境时,低层大气层结是稳定的,在800600 hPa之间大气层结是中性的,此时低层大气干燥,而在沙尘暴移出测站后,湿度明显增大,因此,“3θ”曲线可以为沙尘暴的监测和预报提供一个有价值的参考数据.3）沙尘暴爆发时的螺旋度是所有观测时次中的最大值,螺旋度与沙尘暴的强度在时间上具有良好的对应关系,即螺旋度越大,对应沙尘暴越强.4）此次强沙尘暴的形成与发展不仅受到环境风速的影响,沙尘暴内部的切向旋转速度和垂直运动速度也对其起到重要的作用.     

Cycle graph analysis for 3D roof structure modelling: Concepts and performance

The paper presents a cycle graph analysis approach to the automatic reconstruction of 3D roof models from airborne laser scanner data. The nature of convergences of topological relations of plane adjacencies, allowing for the reconstruction of roof corner geometries with preserved topology, can be derived from cycles in roof topology graphs. The topology between roof adjacencies is defined in terms of ridge-lines and step-edges. In the proposed method, the input point cloud is first segmented and roof topology is derived while extracting roof planes from identified non-terrain segments. Orientation and placement regularities are applied on weakly defined edges using a piecewise regularization approach prior to the reconstruction, which assists in preserving symmetries in building geometry. Roof corners are geometrically modelled using the shortest closed cycles and the outermost cycle derived from roof topology graph in which external target graphs are no longer required. Based on test results, we show that the proposed approach can handle complexities with nearly 90% of the detected roof faces reconstructed correctly. The approach allows complex height jumps and various types of building roofs to be firmly reconstructed without prior knowledge of primitive building types.     

A bottom-up approach to segment individual deciduous trees using leaf-off lidar point cloud data

Light Detection and Ranging (Lidar) can generate three-dimensional (3D) point cloud which can be used to characterize horizontal and vertical forest structure, so it has become a popular tool for forest research. Recently, various methods based on top-down scheme have been developed to segment individual tree from lidar data. Some of these methods, such as the one developed by Li et al. (2012), can obtain the accuracy up to 90% when applied in coniferous forests. However, the accuracy will decrease when they are applied in deciduous forest because the interlacing tree branches can increase the difficulty to determine the tree top. In order to solve challenges of the tree segmentation in deciduous forests, we develop a new bottom-up method based on the intensity and 3D structure of leaf-off lidar point cloud data in this study. We applied our algorithm to segment trees in a forest at the Shavers Creek Watershed in Pennsylvania. Three indices were used to assess the accuracy of our method: recall, precision and F-score. The results show that the algorithm can detect 84% of the tree (recall), 97% of the segmented trees are correct (precision) and the overall F-score is 90%. The result implies that our method has good potential for segmenting individual trees in deciduous broadleaf forest.     

3S技术在辽宁省海岛地名普查中的应用

3S技术因具有快速、准确、实时的导航定位、对地实测和强大的空间信息加工、处理和分析能力,在国防、气象、灾害监测与环境保护、能源、交通、土地资源勘察等领域得以广泛应用。辽宁省海岛地名普查首次采用了3S技术,实现了海岛地名信息和海岛地理基础数据调查与管理的一体化,达到了海岛地理实体、数据信息、外业调查照片的一致性,建立了海岛地名信息系统。详细介绍了辽宁省海岛地名调查中,3S技术在数字化、导航定位和信息识别、提取、勘测、分析、处理以及数据集成等环节中的应用。