The use of WorldView-2 satellite imagery to model urban drainage system with low impact development (LID) Techniques

Within a wide range of best management practices for stormwater management in urban areas, there has been an increasing interest in source control measures. Source controls such as low-impact development (LID) techniques are potentially attractive as retrofit options for older developed areas that lack available land to implement conventional measures such as stormwater management ponds. Hence, distributed urban drainage models requiring detailed representation of developed drainage areas should be developed to accurately estimate the benefits that LIDs may provide. This study (1) presents a two-stage classification process on a high-resolution WorldView-2 image, and (2) demonstrates how to use the extracted land cover information in the subsequent hydrologic modelling and assessment of different LIDs’ performance. The proposed two-stage classification method achieved an overall accuracy of 80.6%, whereas a traditional pixel-based achieved 68.4% in classifying the same urban area into six land cover classes. From the classification results, the hydrologic properties of micro-subcatchments were imported in the United States Environmental Protection Agency Storm Water Management Model to assess the performance of LIDs. A reduction of run-off volume 18.2% and 37.1% was found with the implementation of porous pavement and bioretention, respectively, in a typical low-rise residential area located in the city of San Clemente, California, US. The study demonstrates the use of high-resolution remote sensing image to aid in evaluating LID retrofit options, and thus benefits in situations where detailed drainage area information is not available.     

基于点云空洞修复和TPS模型的数学形态学机载LIDAR滤波

在分析现有滤波算法的基础上,结合数据驱动和模型驱动式算子各自的优点,提出基于点云空洞修复和TPS变形模型的数学形态学机载LIDAR点云滤波,该方法首先提取和修复由水域造成的大面积点云空洞,采用多尺度形态学开算子作用于修复的数据,得到近似裸露地表面;然后利用2D空间的TPS变形模型,以近似地表面为基础,插值原始点云,根据插值与原始点云高程的差值大小去识别地面点和非地面点。通过定量分析,验证该方法不仅有较高的滤波精度,而且也能较好的保留裸露地表的细节特征,同时该方法有助于辅助人工处理,提高数据处理的质量。     

基于土地利用的三维景观格局指数变化分析

由于传统二维景观格局指数未考虑地形特征对景观格局指数的影响,为进一步研究地形结构对景观格局指数的影响,以重庆主城区为研究对象,利用ENVI5.2、ArcGIS10.5、Fragstats4.2平台,对重庆主城区不同城市化阶段的Landsat影像数据进行土地利用变化和三维景观格局分析.结果表明,2008-2018年研究区...     

BDS-3新频点单点定位研究

针对目前有关北斗卫星导航系统(BDS-3)中MEO卫星(BDS-3M)增加的B1C、B2a新频点单点定位研究较少的现状,本文开展了基于新频点B1C、B2a的双频单点定位试验,结合国际GNSS监测评估系统(iGMAS)5个跟踪站连续10 d的数据,对BDS-3的新频点进行数据质量分析、双频伪距单点定位(SPP)和双频静态...     

政府办公自动化系统建设和应用浅谈

本文简要地介绍了办公自动化的发展过程,分析了其常用的功能、特点,以及内容分类,论述了目前办公自动化系统的技术支撑和实现,并指出政府办公自动化系统在开发和应用中存在的问题和解决思路。对系统的推广使用具有一定的参考意义。     

森林资源监测中GF-2卫星影像波段配准误差分析

通过对GF-2卫星影像正射校正及波段模拟配准误差试验,分析GF-2卫星正射校正方法的选择以及不同配准误差下对GF-2卫星影像自动分类结果的影响;最后介绍GF-2遥感影像在森林资源监测应用中的初步测试。研究结果表明:正射校正时,当校正精度要求控制在RMS2时,控制点数量选择范围在85~95间较为合理,且控制点数在90个时,RMS值最小;经有理函数模型与卫片模型比较后,卫片模型校正精度较高;以目视判读为主时,实践中建议使用三次卷积重采样法输出结果最好;波段模拟配准误差试验中,配准误差与各地类面积变化间存在显著的线性关系;对于森林面积监测时,配准误差应小于0.3个像元。此研究可为新型国产卫星数据在森林资源监测中的应用提供参考。     

BDS-2/BDS-3伪距单点定位精度分析

北斗三号(BDS-3)基本系统于2018年底开始提供全球服务．通过处理37个全球GNSS服务组织(IGS)多模实验跟踪网(MGEX)观测站90天北斗数据,评估了北斗二号(BDS-2)和BDS-3在全球范围内的可见卫星数、几何精度衰减因子(GDOP)和单频伪距单点定位精度,分析了BDS-2／BDS-3组合对BDS-2、BDS-3单系统空间几何构型、伪距单点定位(SPP)精度的改善程度．结果表明,BDS-3的空间几何构型较BDS-2有明显的提升,定位精度在东方向、北方向和高程方向分别为1.490、2.610、5.238 m(RMS),相较于BDS-2分别提高了58％、1％、24％．BDS-2／BDS-3组合在东方向、北方向和高程方向分别为1.45、2.36、4.90 m(RMS),较BDS-2与BDS-3单系统分别提高了59％、11％、29％,以及3％、10％、6％．并且BDS-2／BDS-3组合明显削弱了BDS-2定位精度与地理经度相关的边缘效应.      

河口表层悬浮泥沙气象卫星遥感定量模式研究

分析了HRIS光谱图像帧序列的相关性 ,并针对这一特性 ,提出了利用D2 PCM方法 ,降低光谱图像序列的谱相关和空间相关 ,减少图像中的冗余 ,从而实现光谱图像的压缩。该方法提高了压缩比和压缩效率 ,算法运算量小 ,快速。     

Effects of CO2 on benthic biota: An in situ benthic chamber experiment in Storfjorden (Norway)

Carbon capture and storage (CCS) methods, either sub-seabed or in ocean depths, introduces risk of CO₂ leakage and subsequent interaction with the ecosystem. It is therefore important to obtain information on possible effects of CO₂. In situ CO₂ exposure experiments were carried out twice for 10 days during 2005 using a Benthic Chamber system at 400 m depth in Storfjorden, Norway. pCO₂ in the water above the sediment in the chambers was controlled at approximately 500, 5000 and 20,000 μatm, respectively. This article describes the experiment and the results from measured the biological responses within the chamber sediments. The results show effects of elevated CO₂ concentrations on biological processes such as increased nanobenthos density. Methane production and sulphate reduction was enhanced in the approximately 5000 μatm chamber.