我国西部1∶5万地形图空白区地物解译研究——以西藏那曲其香错地区为例

我国西部部分地区1∶5万地形图数据尚未完成,给区域和国家经济发展带来极大不便。空间技术、计算机技术和信息技术的高速发展为遥感技术应用提供了技术支持,高分辨率影像获取能力的提高为大比例尺地物特征的提取提供了数据可能。本文采用SPOT5遥感影像,以1∶5万地形图图式标准为依据,进行青藏高原其香错地区地物判读,结果表明SPOT5能基本满足1∶5万地形图制图要求。为进一步提高判读结果,可采用多时相、多分辨率影像进行1∶5万地形图地物判读。     

考虑关断时间效应的瞬变电磁一维反演

为克服因关断时间校正而带来的误差,尝试直接对包含关断时间效应的瞬变电磁资料进行反演。正演采用将斜阶跃波离散为多个阶跃波之和的方法,反演采用经典的马奎特法。对模型试算的结果表明,采用该方法直接对斜阶跃响应进行反演,结果比较理想,计算速度也可以接受。     

C1相干算法及其在三维地震资料处理解释中的应用

C1相干算法是计算每道的横测线和相邻纵测线的互相关，依据相干值来判断地层和岩性的横向不均匀性。根据互相关原理，提出了相干体算法中二维和三维C1算法的内容及其具体实现。通过对实际三维地震资料的处理，结合已知地质资料，证明C1相干技术在三维地震资料的断层解释方面有着明显的效果。     

刘桥一矿陷落柱发育规律及含水性研究

根据刘桥一矿1971年建井至今发现的8个陷落柱实际资料，通过对揭露陷落柱的地质、水文地质及分布特征的分析，阐述了陷落柱发育的根基所在，对陷落柱发育规律及成因进行了探讨，对于含水陷落柱的注浆封堵、留设保护煤岩柱，以及本矿矿井的深部开采都具有借鉴意义。     

寿阳盆地特深水位成因探讨

寿阳盆地比西部的太原盆地高276m,有“山顶之盆”之称,因地势较高,气候寒冷,又有“冷寿阳”之称.该盆地为新生代断陷盆地,构造条件复杂,具有差异性与继承性的活动特点.其独特的地理条件及地质构造条件,使盆地内奥灰岩溶不断向深处发育,导致岩溶地下水水位埋深达430～550m,具特深水位特征.     

基于VRMap平台上的电子沙盘研制

通过与国内外数字沙盘制作方式及功能的比较，详细介绍了数字沙盘研究方面的一些方法，并以中原油田数字沙盘的研制为例，选择北京灵图公司的VRMap2．3软件作为平台制作中原油田数字沙盘，为油田开发提供基本资料。     

基于GM(1,1)优化模型的岩石边坡变形预报

岩石边坡系统是一典型灰色系统，其变形发展过程可以用灰色预测模型完成。尽管传统GM（1，1）模型预测有很多成功的实例，但是也存在一些预测偏差过大的情况，必须对其进行优化。逐步迭代法GM（1，1）模型不仅收敛速度快，而且与原始数据库序列的凹凸性保护一致。利用自编的计算程序对马步坎边坡预测测点G1沉降和开裂进行预测分析，结果表明逐步迭代法GM（1，1）优化模型计算精度较传统GM（1，1）模型和背景构造法GM（1，1）优化模型高，较好地反映了岩石边坡的变形趋势。     

A mathematical hysteretic model for elastomeric isolation bearings

An analytical model for high damping elastomeric isolation bearings is presented in this paper. The model is used to describe mathematically the damping force and restoring force of the rubber material and bearing. Ten parameters to be identified from cyclic loading tests are included in the model. The sensitivity of the ten parameters in affecting the model is examined. These ten parameters are functions of a number of influence factors on the elastomer such as the rubber compound, Mullins effect, scragging effect, frequency, temperature and axial load. In this study, however, only the Mullins effect, scragging effect, frequency and temperature are investigated. Both material tests and shaking table tests were performed to validate the proposed model. Based on the comparison between the experimental and the analytical results, it is found that the proposed analytical model is capable of predicting the shear force–displacement hysteresis very accurately for both rubber material and bearing under cyclic loading reversals. The seismic response time histories of the bearing can also be captured, using the proposed analytical model, with a practically acceptable precision. Copyright © 2002 John Wiley & Sons, Ltd.     

Tests on low‐ductility RC frames under high‐ and low‐frequency excitations

The response of low‐ductility reinforced concrete (RC) frames, designed typically for a non‐seismic region, subjected to two frequencies of base excitations is studied. Five half‐scaled, two‐bay, two‐storey, RC frames, each approximately 5 m wide by 3.3 m high, were subjected to both horizontal and/or vertical base excitations with a frequency of 40 Hz as well as a lower frequency of about 4 Hz (close to the fundamental frequency) using a shake table. The imposed acceleration amplitude ranged from 0.2 to 1.2g. The test results showed that the response characteristics of the structures differed under high‐ and low‐frequency excitations. The frames were able to sustain high‐frequency excitations without damage but were inadequate for low‐frequency excitations, even though the frames exhibited some ductility. Linear‐elastic time‐history analysis can predict reasonably well the structural response under high‐frequency excitations. As the frames were not designed for seismic loads, the reinforcement detailing may not have been adequate, based on the crack pattern observed. The effect of vertical excitation can cause significant additional forces in the columns and moment reversals in the beams. The ‘strong‐column, weak‐beam’ approach for lateral load RC frame design is supported by experimental observations. Copyright © 2001 John Wiley & Sons, Ltd.     

Study on effects of damping in laminated rubber bearings on seismic responses for a ⅛ scale isolated test structure

The effects of damping in various laminated rubber bearings (LRB) on the seismic response of a ?‐scale isolated test structure are investigated by shaking table tests and seismic response analyses. A series of shaking table tests of the structure were performed for a fixed base design and for a base isolation design. Two different types of LRB were used: natural rubber bearings (NRB) and lead rubber bearings (LLRB). Three different designs for the LLRB were tested; each design had a different diameter of lead plug, and thus, different damping values. Artificial time histories of peak ground acceleration 0.4g were used in both the tests and the analyses. In both shaking table tests and analyses, as expected, the acceleration responses of the seismically isolated test structure were considerably reduced. However, the shear displacement at the isolators was increased. To reduce the shear displacement in the isolators, the diameter of the lead plug in the LLRB had to be enlarged to increase isolator damping by more than 24%. This caused the isolator stiffness to increase, and resulted in amplifying the floor acceleration response spectra of the isolated test structure in the higher frequency ranges with a monotonic reduction of isolator shear displacement. Copyright © 2002 John Wiley & Sons, Ltd.