泥晶灰岩地层孔壁坍塌掉块现象及处理

在灰岩地区钻探施工过程中，常见孔壁坍塌、掉块现象，尤其在含泥晶灰岩地层分布区钻进过程中，这种现象尤为突出，轻则影响钻探施工效率，重则造成钻探孔内事故。针对孔内坍塌、掉块现象的征兆及特点，提出了相对应的处理办法。     

射水法结合高压喷射技术在堤基防渗处理中的应用

通过工程实例介绍了在特殊条件下射水法和高压喷射两种工艺相结合进行堤基防渗处理的施工工艺及实施的效果。     

Application of membrane technology for water treatment： Ultrasound-associated cleaning of fouled microfiltration membranes

The use of membranes is a widely employed, versatile, and effective separation process. One of the limiting aspects in applying microfiltration （MF） for wastewater treatment is that of problems with membrane fouling and consequent flux reduction. Membrane fouling occurs by the irreversible deposition of retained particles, colloids, macromolecules, salts, etc. at the membrane surface and/or inside the membrane. The predominant fouling mechanisms observed with MF membranes are classified as three categories： the build-up of a cake layer on the membrane surface, blocking of membrane pores, and adsorption of fouling material on the membrane surface or in the pore walls. Although many techniques have been developed to overcome fouling, studies on membrane cleaning still seem to be insufficient for practical membrane filtration systems. Current membrane cleaning technologies include hydraulic, chemical, and mechanical methods. Ultrasound （US） has been widely used as a method of cleaning materials because of the cavitation phenomenon. In this study, US cleaning technique was applied to removing the fouling of polyvinglidenefluoride （PVDF） MF membrane, which was used to treat yeast cell and isolated soybean protein （ISP） solution, respectively. The US employed 40 kHz frequency and the output power of 1.43-2.85 W/cm^2. The evolution of the cleaning effect is followed by the measurements of the flux recovery rate （FRstat） and the cleaning time cycle. Results showed that the membrane property, which was fouled by yeast cell solution, could be recovered by water cleaning with US irradiation. And the cleaning time with the same FRstat decreased with the increase of US intensity.     

新型导线在水电工程测量中的应用

结合山岭重丘地区的一水电工程,根据其特殊的地形条件,采用新型的导线布网形式,避免树木的大量砍伐,确保通视良好;再利用全站仪观测,按导线的严密坐标平差方法,运用MATLAB6.1软件对测量数据进行处理,计算出各控制点的坐标,得到满意的结果.     

航天INSAR复影像对的自动快速匹配

针对航天INSAR主、辅影像数据的特点,提出了加大匹配窗口、加大锚点间隔的匹配策略,以提高匹配的可靠性和速度.在匹配过程中,综合利用轨道参数和强度影像金字塔进行粗匹配,并对强度影像采用相关系数与最小二乘相结合的双向匹配方案,实现了自动、快速、高可靠性和高精度的航天INSAR复影像匹配.最后总结了航天INSAR复影像匹配的特点.     

基于数据手套和跟踪器的虚拟手臂建模

文中利用数据手套和跟踪器获取手臂各关节运动数据,根据关节运动限制对所获取数据进行处理,建立了符合人体运动规律的虚拟手臂数学模型,实现了虚拟环境中与试验者的手臂同步运动、效果逼真的虚拟手臂模型.     

全站仪测距系统误差及处理方法的探讨

本文通过对全站仪结构原理的阐述，分析了测距系统误差的来源，给出了在实际工作中减小或解决测距误差的方法。     

石家庄市GPS控制网的数据处理方法和分析

本文介绍了石家庄市GPS控制网的现状、概况及观测概要，重点叙述了石家庄GPS控制网在基线处理、平差处理、坐标转换、高程拟合以及投影变形等五个方面的做法和体会，对其他城市做GPS控制网时有一定的参考价值。     

Geolord-AT空三加密软件处理数码航片的方法

在Geolord-AT空三加密软件中对数码航片进行框标定向的前期处理，创建带有框标的数码航片或者直接创建内定向的＊．kb文件，使数码航片顺利按要求通过内定向。