海带膳食纤维的提取与功能性试验

采用酶技术和化学处理相结合的方法 ,研究了海带膳食纤维的工艺技术 ,筛选出海带膳食纤维提取和漂白的最佳工艺条件 ,提取出海带膳食纤维产品 ,并进行人体的功能性试验。结果表明 ,海带膳食纤维的产率达 2 7.3% ,颜色为类白色 ,膳食纤维含量达 73.3% ,钙含量 7.5% ,膨胀力为55m L/ g,持水力为 2 650 % ;海带膳食纤维的功能性优于小麦麸皮膳食纤维 ,对便秘患者具有良好的疗效。     

玄武岩纤维加筋黏土数值模拟及机理研究

为研究玄武岩纤维加筋黏土的力学特性及纤维加筋机理,采用ABAQUS有限元软件构建了玄武岩纤维加筋黏土数值分析模型,同时基于Python语言对ABAQUS建模进行了二次开发,按纤维与干土质量的百分比0、0.05％、0.10％、0.15％、0.20％、0.25％、0.30％、0.35％和0.60％,考虑了不同纤维长度和分布...     

无机增强纤维Ⅰ.钛酸钾纤维

结晶质的钛酸钾纤维因其性质特殊而备受青睐，本文介绍了二钛酸钾、四钛酸钾、六钛酸钾和八钛酸钾纤维的结构、性质、用途，及国内外的研究现状．     

对山西应县木塔采用纳米复合纤维加固的建议

山西应县木塔是古人留给我们的稀世珍宝，如何妥善地保护好这一珍贵的遗产，使之在加固时尽量保持原有的风貌，是一项复杂而艰巨的任务。根据长期的研究成果和实际工作的经验，提出了用纳米复合纤维加固应县木塔的建议，介绍了纳米复合纤维材料的特点，分析讨论了加固时的一些具体技术问题。     

高效纤维束过滤器去除黄河水浊度的应用

简要介绍了纤维束过滤器的工作原理,针对原水水质及用户对水质的要求,设计了用纤维束过滤器去除黄河水浊度的处理工艺,提出了纤维束过滤器的运行参数,分析了纤维束过滤器对黄河水浊度的去除效果.     

红纤维虾海藻(Phyllospadix iwatensis)形态结构特征及其对海洋环境的适应性

红纤维虾海藻作为海洋沉水高等植物具有重要的生态与渔业价值。该物种目前已经处于濒 危状态, 且研究资料十分匮乏。本研究通过实地生境调查, 对其进行了形态学与解剖学研究, 并在此 基础上对其海洋环境的结构适应性进行了较为深入的探讨。研究结果表明: 红纤维虾海藻须根末端 膨大并密生根毛, 有利于增强植株的抓附能力和吸收能力; 表皮细胞细胞壁具有类似栓化细胞初生 壁性质的六面加厚现象, 与外部多层皮层厚角组织形成机械组织区, 叶鞘内侧含有丰富的机械组织, 使结构的抗性加强, 能承受较强的海流冲击; 雄花序中无退化雌蕊, 雌花序兼具雌蕊和退化的雄蕊, 花序轴两侧着生数枚桨状小苞片, 花粉丝状, 利于授粉, 传粉方式为水媒和半水媒传粉; 小坚果密 生倒向长鬃毛, 便于果实在海流中固着锚定。该研究弥补了目前对海洋沉水高等植物适应性进化特 征理解的不足, 也为该物种在生态修复中的应用提供了科学依据。     

Uplift of symmetrical anchor plates by using grid-fixed reinforced reinforcement in cohesionless soil

Uplift response of symmetrical anchor plates with and without grid fixed reinforced （GFR） reinforcement was evaluated in model tests and numerical simulations by Plaxis. Many variations of reinforcement layers were used to reinforce the sandy soil over symmetrical anchor plates. In the current research, different factors such as relative density of sand, embedment ratios, and various GFR parameters including size, number of layers, and the proximity of the layer to the symmetrical anchor plate were investigated in a scale model. The failure mechanism and the associated rupture surface were observed and evaluated. GFR, a tied up system made of fiber reinforcement polymer （FRP） strips and end balls, was connected to the geosynthetic material and anchored into the soil. Test results showed that using GFR reinforcement significantly improved the uplift capacity of anchor plates. It was found that the inclusion of one layer of GFR, which rested directly on the top of the anchor plate, was more effective in enhancing the anchor capacity itself than other methods. It was found that by including GFR the uplift response was improved by 29%. Multi layers of GFR proved more effective in enhancing the uplift capacity than a single GFR reinforcement. This is due to the additional anchorage provided by the GFR at each level of reinforcement. In general, the results show that the uplift capacity of symmetrical anchor plates in loose and dense sand can be significantly increased by the inclusion of GFR. It was also observed that the inclusion of GFR reduced the requirement for a large L/D ratio to achieve the required uplift capacity. The laboratory and numerical analysis results are found to be in agreement in terms of breakout factor and failure mechanism pattern.     

中建西北院预制耗能墙技术获国家专利

近日,中国建筑西北设计研究院（以下简称“中建西北院”）申请的专利技术“预制纤维增强混凝土耗能墙“获得国家知识产权局授权。预制纤维增强混凝土耗能墙由工程纤维增强水泥基复合材料（ECC）预制而成,其延性、耗能能力是普通混凝土墙的2倍～3倍,可作为抗侧力耗能构件安装于主体结构所需部位。由于耗能墙在主体完工后安装,不承担竖向荷载,其截面尺寸较小,具有布置灵活、不影响建筑美观及使用功能、价格低廉、低碳环保的优势,能够有效地解决混凝土结构设计过程中诸如结构扭转不规则、竖向不规则、剪重比不足、框架一剪力墙（核心筒）结构中外框分配剪力不足等一系列问题,可作为屈曲约束支撑的中端替代产品（价格约为屈曲约束支撑的1／3）,应用范围十分广阔。