一个两时间层分裂显格式海洋环流模式(MASNUM)及其检验

A two-time-level, three-dimensional numerical ocean circulation model（named MASNUM） was established with a two-level, single-step Eulerian forward-backward time-differencing scheme. A mathematical model of large-scale oceanic motions was based on the terrain-following coordinated, Boussinesq, Reynolds-averaged primitive equations of ocean dynamics. A simple but very practical Eulerian forward-backward method was adopted to replace the most preferred leapfrog scheme as the time-differencing method for both barotropic and baroclinic modes. The forward-backward method is of second-order of accuracy, computationally efficient by requiring only one function evaluation per time step, and free of the computational mode inherent in the three-level schemes. This method is superior to the leapfrog scheme in that the maximum time step of stability is twice as large as that of the leapfrog scheme in staggered meshes thus the computational efficiency could be doubled. A spatial smoothing method was introduced to control the nonlinear instability in the numerical integration. An ideal numerical experiment simulating the propagation of the equatorial Rossby soliton was performed to test the amplitude and phase error of this new model. The performance of this circulation model was further verified with a regional（northwest Pacific） and a quasi-global（global ocean simulation with the Arctic Ocean excluded） simulation experiments. These two numerical experiments show fairly good agreement with the observations. The maximum time step of stability in these two experiments were also investigated and compared between this model and that model which adopts the leapfrog scheme.     

基于ＳｔａＭＰＳ方法的大坝形变监测可行性研究

利用时序ＩｎＳＡＲ技术的优势,以新疆ＷＬＬ水库大坝为研究对象,使用３１幅Ｓｅｎｔｉｎｅｌ－１Ａ影像,采用ＳｔａＭＰＳ 方法对其进行形变监测,得到大坝及周边区域的形变结果,并从内、外符合精度两个方面进行精度验证。结果表明, 研究区域ＰＳ点平均形变速率标准差区间为０．３～３．１ｍｍ／ａ;ＳｔａＭＰＳ与ＳＢＡＳ形变速率中误差为±５．７ｍｍ;与大 坝二等水准监测成果比较,垂直形变速率中误差为±５．０ｍｍ,垂直累积形变量中误差为±１０．２ｍｍ。从而证明 ＳｔａＭＰＳ方法在大坝形变监测应用中的可行性。     

Correlation analysis and partial least square modeling to quantify typical minerals with Chang＇E-3 visible and near-infrared imaging spectrometer＇s ground validation data

In 2013, Chang＇E-3 program will develop lunar mineral resources in-situ detection. A Visible and Near-infrared Imaging Spectrometer （VNIS） has been selected as one payload of CE-3 lunar rover to achieve this goal. It is critical and urgent to evaluate VNIS＇ spectrum data quality and validate quantification methods for mineral composition before its launch. Ground validation experiment of VNIS was carried out to complete the two goals, by simulating CE-3 lunar rover＇s detection environment on lunar surface in the laboratory. Based on the hyperspectral reflectance data derived, Correlation Analysis and Partial Least Square （CA-PLS） algorithm is applied to predict abundance of four lunar typical minerals （pyroxene, plagioclase, ilmenite and olivine） in their mixture. We firstly selected a set of VNIS＇ spectral parameters which highly correlated with minerals＇ abundance by correlation analysis （CA）, and then stepwise regression method was used to find out spectral parameters which make the largest contri- butions to the mineral contents. At last, functions were derived to link minerals＇ abundance and spectral parameters by partial least square （PLS） algorithm. Not considering the effect of maturity, agglutinate and Fe~, we found that there are wonderful correlations between these four minerals and VNIS＇ spectral parameters, e.g. the abundance of pyroxene correlates positively with the mixture＇s absorption depth, the value of absorption depth added as the in- creasing of pyroxene＇s abundance. But the abundance of plagioclase correlates negatively with the spectral parame- ters of band ratio, the value of band ratio would decrease when the abundance of plagioclase increased. Similar to plagioclase, the abundance of ilmenite and olivine has a negative correlation with the mixture＇s reflectance data, if the abundance of ilmenite or olivine increase, the reflectance values of the mixture will decrease. Through model validation, better estimates of pyroxene, plagioclase and ilmenite＇s abundances are given. It is concluded that VNIS has the capability to be applied on lunar minerals＇ identification, and CA-PLS algorithm has the potential to be used on lunar surface＇s in-situ detection for minerals＇ abundance prediction.     

基于全景影像的增强地理现实配准方法研究

介绍基于全景序列影像的增强地理现实构造方法,分析地理现实、地理空间数据以及全景序列影像三要素间的关系和研究的趋势。结合柱面投影理论实现地理空间数据到全景序列影像的转换,完成由虚拟空间向真实空间的定位配准,并给出一种用于验证可行性的非平均特征点采样方法,为进一步研究提供理论基础。     

水下溢油数值模拟研究

基于Lagrange积分法和Lagrange粒子追踪法建立了一个水下溢油数值模型。该溢油模型由两个子模型组成:羽流动力模型和对流扩散模型,其中羽流动力模型用以模拟溢油的喷发阶段和浮力羽流阶段;对流扩散模型用以模拟溢油的对流扩散阶段。通过数值实验,结合实验室水槽实验和水下溢油现场实验的观测资料进行模型验证。实验结果表明,模拟结果与观测资料一致性较好,从而验证了本文溢油模型的合理性和准确性;羽流动力模型为对流扩散模型提供源,海流、海水的垂向密度结构和油滴的直径分布是影响溢油在对流扩散阶段运动和分布的主要因素。     

地理信息系统与其在城市规划与管理中的应用

在国外(除了发达国家和部分发展中国家)地理信息系统及其在城市规划与管理中南应用正迅速发展，国内也有不少地方已经准备或正在建立各种地理信息系统。本书全面、系统地介绍了地理信息系统的基本原理、应用方法、最新理论与发展趋势，及其在城市规划与管理方面的应用实例，还提供了一些在应用方面的经验和教训。     

ZHDN-SDR 150A型高频声波钻机设计

文章主要介绍了ZHDN-SDR 150A 型高频声波钻机设计及其验证测试,为该钻机应用于污染场地调查和治理提供理论依据和技术指导。论文阐述了钻机总体设计思路及主要性能参数指标,系统分析了高频声波动力头、钻机主体、配套钻具结构设计及其技术创新。该钻机在两种不同地层进行了验证测试,各项测试指标均达到设计要求。将验证测试结果与国内外同类钻机对比表明,ZHDN-SDR 150A型钻机主要性能参数与关键装置已处于国内先进和国外并跑水平。该型钻机在振动频率、地层适用性、钻具使用寿命等方面优势显著,但是存在过高温度运行条件下钻进效率降低、智能自动化水平不足的问题,需进一步研发耐高温强硬度新材料和改进远程无线操控系统。     

钨矿石和锡矿石化学成分分析能力验证结果评价和离群值原因

金属矿产的勘查、评价、开发与综合利用要求对不同矿石品位与精矿的完整系列品质进行评价检测和仲裁测试。钨矿石和锡矿石作为金属矿的重要矿种,在客观上要求相关实验室应具备不同含量品级钨矿石和锡矿石组分的检测能力。本文按照国家认证认可监督委员会(CNCA)编号为CNCA-13-A14的钨矿石和锡矿石化学成分分析能力验证计划的要求,对中国30个省市、自治区的58个实验室提供的8个元素(W、Sn、Cu、Pb、Zn、Mo、Sb、Bi)的测定结果进行能力验证分析,采用稳健统计法,根据Z比分数判定参加实验室的检测能力。根据Z比分数≤2为满意结果的判定标准,51个实验室全部结果的Z比分数≤2,总体结果满意率(各元素的Z比分数均≤2的实验室占总实验室的比例)为88%,出现可疑和离群结果的实验室占12%。总体上钨矿石和锡矿石中元素Sb、Pb、Zn的满意率较高(其中锡矿石的Zn测定结果全部满意),W、Bi稍差;钨矿石各元素的检测水平差异小,整体结果好于锡矿石。钨矿石和锡矿石分析能力验证结果产生离群值的原因,一方面是实验室的测试水平存在差异;另一方面是各实验室采用的检测方法分散,有化学分析方法和仪器分析方法,化学分析方法检测步骤多,仪器分析方法方便快速,逐渐成为例行检测方法,两类方法的影响因素都较多。本文提出,提高实验室的检测水平和检测能力,需要适当统一检测方法,提高方法掌握的熟练程度,避免仪器状态对分析结果的影响,确保检测结果的一致性和准确性。     

一种新的遥感蚀变信息编图方法

利用遥感蚀变信息进行成矿预测已经得到普遍应用, 但是并没有系统的编图方法, 提出遥感蚀变信息等密度制图法以进行改进.它借鉴了地球化学场的编图思路, 通过统计单位面积内各蚀变信息所占的面积百分比, 进而生成面密度等值线图.利用该方法并结合线、环构造信息在内蒙古东乌旗地区圈定了8个成矿远景区.这种新的编图方法, 既能有效增强多种蚀变同时出现时小面积蚀变信息, 又能更直观的表达蚀变信息的总体空间分布特征和浓集中心, 对圈定成矿远景区和优选野外验证点十分有利.      

协同利用高光谱与多光谱遥感技术提取油气异常信息

为了在缺少地面实测数据的情况下对遥感油气异常结果进行验证, 利用多光谱遥感数据和高光谱遥感数据对同一地区进行油气异常解译, 针对同一位置使用两种不同数据的异常结果进行相互验证.并提出了利用高光谱异常提取结果作为先验知识的多光谱异常主分量阈值确定方法, 将该方法与传统主分量阈值方法提取的异常结果, 分别与高光谱提取出的粘土异常区域结果进行重叠率计算, 发现该方法提取出的异常区与高光谱提取的结果重叠率达98.808%, 高于传统主分量阈值方法的98.198%.结果表明利用该方法确定的阈值划分出的异常区具有较高的精度.