基于GIS技术的大地电磁测深数据库系统设计与实现

大地电磁(Megnetotelluric,简称MT)测深数据子库是中国岩石圈三维结构数据库所属子库之一。本文阐述了结合GIS技术开发大地电磁测深数据库管理系统的必要性。讨论了新型大地电磁测深数据库及基于GIS平台的数据库管理系统的总体设计思想。在分析原ACCESS大地电磁测深数据库所存在问题的基础上,建立新的MT数据库实体-关系模型,并进一步把原有的MT数据库改造为SQL Server 2000数据库;同时,开发了基于GIS的MT数据库管理系统。本文介绍了基于GIS的MT数据库管理系统所具有的功能。     

非一致激励条件下工程场地地震动相干函数的数值模拟--Ⅰ分析原理和方法

本文将随机振动的虚拟激励原理与工程波动理论散射问题的求解方法相结合,建立了开放系统中非一致激励条件下工程场地地震动随机场的数值模拟方法。该方法将随机输入下的波动分析问题转换为多个虚拟激励下的确定性波动分析组合问题,从而可以方便地获得场地波动观测量之间的谱密度矩阵,进而计算给出工程场地的地震动相干函数。本文还用数值模拟的办法对所提出方法的合理性和稳定性进行了探讨。     

Winkler地基梁在温度场中受简谐激励的主共振分析

研究W inkler地基梁在温度场中受简谐激励作用的主共振问题。应用弹性理论和Galerk in方法建立W inkler地基梁在温度场中受简谐激励作用的非线性动力方程。应用非线性振动的多尺度法,求得系统主共振的近似解。分析不同参数对主共振响应曲线的影响。     

某水电站高边坡在地震作用下的稳定性分析

某水电站地处地质构造活动强烈的地带,坝址区边坡BT20高度达130m,其稳定性严重影响了水电枢纽工程的安全.作者利用Msarma法中准静态地震作用原理,通过引入水平地震系数Kc分析在各种烈度地震作用下边坡的稳定性系数、边坡稳定性对地震作用的敏感性,还分析了高边坡BT20蓄水前、后在各种烈度的地震作用下的稳定性系数.通过分析可知,边坡在Ⅷ度地震作用时处于临界平衡状态,地震作用是高边坡BT20稳定的重要影响因素.     

Winkler地基梁在温度场中受简谐激励的1/3次亚谐共振分析

研究W inkler地基梁在温度场中受简谐激励作用的1/3次亚谐共振问题。应用弹性理论和Galerk in方法建立W inkler地基梁在温度场中受简谐激励作用的非线性动力方程,根据非线性振动的多尺度法求得系统满足1/3次亚谐共振情况的一次近似解,并对其进行数值计算,分析了温度、调谐值、激励、阻尼、地基刚度等参数对系统的影响。     

A comparative study between China and U.S. on seismic design philosophy and practice of a long span arch bridge

This paper presents the first of a series of case studies on the seismic design of long span bridges （cable-stayed bridges, suspension bridges and arch bridges） under a cooperative research project on seismic behavior and design of highway bridges between the State Key Laboratory for Disaster Reduction in Civil Engineering, Tongji University and the Multidisciplinary Center for Earthquake Engineering Research, University at Buffalo. The objective of this series of case studies is to examine the differences and similarities on the seismic design practice of long span bridges in China and the U.S., to identify research needs and to develop design guidelines beneficial to bridge engineers in both countries. Unlike short to medium span bridges, long span bridges are not included in most seismic design specifications, mainly because they are location dependent and structurally unique. In this paper, an available model of a steel tied half through arch bridge with a main span of 550m in China is discussed. Analysis is focused on comparisons of the seismic responses due to different ground motions. Seismic design criteria and seismic performance requirements for long span bridges in both countries were first introduced and compared, and then three near field earthquake records with large vertical components were selected as the excitations to examine the seismic behavior and seismic vulnerability of the bridge. Results show that （1） the selected near field ground motions cause larger responses to key components （critical sections） of the bridge （such as arch rib ends） with a maximum increase of more than twice those caused by the site specific ground motions; （2） piers, longitudinal girders and arch crowns are more vulnerable to vertical motions, especially their axial forces; and （3） large vertical components of near field ground motions may not significantly affect the bridge＇s internal forces provided that their peak acceleration spectra ordinates only appear at periods of less than 0.2s. However, they may have more influence on the longitudinal displacements of sliding bearings due to their large displacement spectra ordinates at the fundamental period of the bridge.     

Artificial ground motion compatible with specified ground shaking peaks and target response spectrum

1 Introduction Time history analysis is usually needed not only for the seismic design of important structures, such as nuclear plants, large concrete dams and super high-rise buildings, but also for seismic performance based design. Performance-based design requires tha knowledge of the entire process of nonlinear seismic responses of structures be obtained, which depends on the ground motion time history as input for this analysis. However, because the observed strong-motion recordings are l…     

Kinematic source model for simulation of near-fault ground motion field using explicit finite element method

1 Introduction The prediction of broadband near-fault ground motion is an important aspect of seismic risk analysis, and is essential for the evaluation of urban seismic safety. Many methodologies are used to model the near-fault ground motions, such as the Green function method, ?nite element (FE) / ?nite difference (FD) method and a hybrid method (Aagaard, 1999; Oprsal and Zahradnik, 2002; Oprsal et al., 2003 a and b). In the hybrid method, the FE / FD method is used to model the low fr…     

An evaluation of force-based design vs. direct displacement-based design of jointed precast post-tensioned wall systems

The unique features of jointed post-tensioned wall systems, which include minimum structural damage and re-centering capability when subjected to earthquake lateral loads, are the result of using unbonded post-tensioning to attach the walls to the foundation, along with employing energy dissipating shear connectors between the walls. Using acceptance criteria defined in terms of inter-story drift, residual drift, and floor acceleration, this study presents a multiplelevel performance-based seismic evaluation of two five-story unbonded post-tensioned jointed precast wall systems. The design and analysis of these two wall systems, established as the direct displacement-based and force-based solutions for a prototype building used in the PREcast Seismic Structural Systems （PRESSS） program, were performed at 60% scale so that the analysis model could be validated using the PRESSS test data. Both buildings satisfied the performance criteria at four levels of earthquake motions although the design base shear of the direct displacement-based jointed wall system was 50% of that demanded by the force-based design method. The study also investigated the feasibility of controlling the maximum transient inter-story drift in a jointed wall system by increasing the number of energy dissipating shear connectors between the walls but without significantly affecting its re-centering capability.     

探测未爆炸弹的地球物理技术综述

采用综合地球物理勘查技术探测未爆炸弹(UXO)具有快速、定位准确和成本低廉的优势.综述了国内外广泛应用的地面高精度磁测法、电磁法以及地质雷达和微重力法在探测UXO中的特点和效果,介绍了国外航空磁测法及航空电磁法探测UXO的进展,并根据某些探测实例阐述了在具体实施过程中应注意的技术问题;提出了适合中国UXO探测的一些措施和建议.