北京市地铁暗挖施工沉降控制探讨

仅以北京市地铁4#线张自忠车站主体暗挖施工的沉降监控项目为研究背景,对穿越城市主干道的车站结构暗挖施工进行连续性的沉降变形监测;从地下构筑物暗挖施工的工序变化与地表沉降的关系进行试验研究.在预测基础上对获取的数据进行多层次的统计与分析,以研究其变形规律与稳定性,实现了信息化施工.     

变形监测信息管理系统的设计与实现

介绍了GIS数据管理与图形显示的优势、组件技术,设计了变形监测数据管理系统平台,实现了变形监测数据的智能化管理、分析与预测.     

徕卡GPS静态测量在小浪底变形监测中的应用

一、小浪底水利枢纽工程大坝变形观测设计方案1.工程概况小浪底水利枢纽工程位于黄河干流最后一个峡谷出口,上游距三门峡水利枢纽130 km,下游距郑州花园口128 km,是惟一能在黄河下游取得较大库容的控制性工程。枢纽建成后,能有效地控制黄河泥沙,减少下游淤积,提高下游的防洪标准。小浪底水利枢纽大坝为壤土斜心墙堆石坝,最大坝高154 m,坝顶长1 667 m,坝顶宽12 m,最大底宽800 m。2.主坝外部变形观测设计方案为了监测主坝的外部变形情况,在坝顶及上下游坝坡上共布设了15条视准线,工作基点24个(其中基岩标7个),表面位移标点145个,见图1。原设计…     

一种实用的地面数字化成图方法——简别码法

介绍一种由简别码(简码加判别码)代替编码法草图法地面数字成图的方法。与现行方法相比,该方法编码容易,操作简单方便,野外采集数据速度快,内业根据生成的简别码判读方便、编辑速度快,提高了整个成图工作的效率。     

Estimating Influence of Crystallizing Latent Heat on Cooling-Crystallizing Process of a Granitic Melt and Its Geological Implications

Based on the theory of thermal conductivity, in this paper we derived a formula to estimate the prolongation period （AtL） of cooling-crystallization process of a granitic melt caused by latent heat of crystallization as follows：△tL=QL×△tcol/（TM-TC）×CP where TM is initial temperature of the granite melt, Tc crystallization temperature of the granite melt, Cp specific heat, △tcol cooling period of a granite melt from its initial temperature （TM） to its crystallization temperature （Tc）, QL latent heat of the granite melt.
The cooling period of the melt for the Fanshan granodiorite from its initial temperature （900℃） to crystallization temperature （600℃） could be estimated -210,000 years if latent heat was not considered. Calculation for the Fanshan melt using the above formula yields a AtL value of -190,000 years, which implies that the actual cooling period within the temperature range of 900°-600℃ should be 400,000 years. This demonstrates that the latent heat produced from crystallization of the granitic melt is a key factor influencing the cooling-crystallization process of a granitic melt, prolongating the period of crystallization and resulting in the large emplacement-crystallization time difference （ECTD） in granite batholith.     

Jurassic Tectonics of North China: A Synthetic View

This paper gives a synthetic view on the Jurassic tectonics of North China, with an attempt to propose a framework for the stepwise tectonic evolution history. Jurassic sedimentation, deformation and magmatism in North China have been divided into three stages. The earliest Jurassic is marked by a period of magmatism quiescence （in 205-190 Ma） and regional uplift, which are considered to be the continuation of the “Indosinian movement” characterized by continent-continent collision between the North and South China blocks. The Early to Middle Jurassic （in 190-170 Ma） was predominated by weak lithospheric extension expressed by mantle-derived plutonism and volcanism along the Yanshan belt and alongside the Tan-Lu fault zone, normal faulting and graben formation along the Yinshan- Yanshan tectonic belt, depression and resuming of coal-bearing sedimentation in vast regions of the North China block （NCB）. The Middle to Late Jurassic stage started at 165y.5 Ma and ended up before 136 Ma; it was dominated by intensive intraplate deformation resulting from multi-directional compressions. Two major deformation events have been identified. One is marked by stratigraphic unconformity beneath the thick Upper Jurassic molasic series in the foreland zones of the western Ordos thrust-fold belt and along the Yinshan-Yanshan belt; it was predated 160 Ma. The other one is indicated by stratigraphic unconformity at the base of the Lower Cretaceous and predated 135 Ma. During this last stage, two latitudinal tectonic belts, the Yinshan-Yanshan belt in the north and the Qinling-Dabie belt in the south, and the western margin of the Ordos basin were all activated by thrusting; the NCB itself was deformed by the NE to NNE-trending structural system involving thrusting, associated folding and sinistral strike-slip faulting, which were spatially partitioned. Foliated S-type granitic plutons aged 160-150 Ma were massively emplaced in the Jiao-Liao massif east of the Tan-Lu fault zone and indicate important crustal thicken     

基于GIS的长江南京段图档管理系统的设计与实现

系统地论述应用GIS技术、数据库技术建立图档管理信息系统,该系统界面友好,操作简单,能够较好解决图档的版本化管理问题,便于各种层次的管理人员使用。     

变形分析的神经网络技术应用实例

大型工程施工过程中的变形监测、分析与预报极为重要。变形分析建模的方法很多,神经网络技术的应用是其中之一。文中结合某深基坑工程的监测资料和工作经验,运用神经网络BP算法进行预测分析。简述BP神经网络的基本概念,介绍基坑变形分析的BP神经网络的具体模型结构,将神经网络方法预报结果与实测数据对比效果较好。该成果对生产实践具有参考价值。     

波流共存场中多向随机波浪传播变形数学模型

基于波作用量守恒方程建立了波流共存场中多向随机波浪传播变形数学模型,模型中考虑了波浪绕射的影响和水流引起的波浪弥散多普勒效应,应用包含水流和地形影响的激破波模式计算波浪破碎的能量耗散,采用一阶上迎风有限差分格式离散控制方程。分别计算了有无近岸流情况下单向和多向随机波浪的波高分布,考虑水流影响的数值计算结果与物理模型实验数据吻合良好,比较分析表明,所建立的数学模型能够复演由于离岸流引起的波高增大,可用于波流共存场多向随机波浪传播变形的模拟和预报。