SWAN模型对实验室小尺度浅水波浪模拟研究

基于浅水斜坡地形的物理模型试验数据,考察SWAN模型对实验室小尺度浅水波浪的模拟效果,进而检验其浅水项的模拟精度。模拟中采用直接输入初始测点的实测海浪谱进行造波,重点考察浅水中三波相互作用和变浅破碎两个源项,对不同工况下,SWAN模式在水深条件变化下的有效波高、谱平均周期、海浪谱演化的模拟能力进行研究。研究表明:模拟的有效波高较符合实测波浪的增长和衰减,但谱平均周期计算值明显偏小;海浪谱的能量转移机制同实测有较大区别,频谱模拟结果出现高频高估、低频低估现象。对两个源项进行对比分析得出三波相互作用对海浪谱的能量转换影响远大于变浅破碎耗散。想要提高近岸区谱平均周期和海浪谱的模拟精度则SWAN模型中三波非线性项的计算精确度仍需更多研究和改进。     

直墙前破波波浪力──对修正过的Gota方法的探讨

对被重新修正后的Goat在墙波压力计算方法进行了分析，主要是对其无因次波浪力随基床肩宽和相对波高的变化进行分析，结果发现，Goat法计算的无因次波浪力随基床肩宽的变化，有一最不利肩宽，此不利肩宽与相对波高无关；在同一水深条件下，Goat法计算的无因次波浪力随相对波高的增大而增大。此两点与试验数据不符。     

吕宋海峡内波吸引子的三维数值模拟

Internal waves propagate along wave beams that are inclined with respect to the horizontal plane. It is conjectured that the internal waves generated in the Luzon Strait may be confined between the double ridges in the strait and concentrate to a closed trajectory, the so-called internal wave attractor, due to the reflection of wave beams from the lateral boundaries, sea surface and bottom. This work carried out two experiments using a three dimensional non-hydrostatic general circulation model, MITgcm, to investigate the possibility that the ridges in the Luzon Strait allows for internal wave attractors. Baroclinic current in both of the experiments demonstrate the forming of ring-like patterns in some section around 20° and 21°N, indicating that the development of the internal wave attractors are allowed in the Luzon Strait. The different resolutions and initial conditions in the two experiments also reveal that the internal-wave-attractor phenomenon is robust in this region.     

Stokes波的谱特性分析

应用理论推导及数值计算方法，对Stokes随机波的谱特性进行了分析。首先将波面方程，海水质点水平速度用一阶波面分量的非线性组合表示，应用平稳随机高阶短的降阶计算法则，得到了波面方程及海水质点水平速度与一阶波面分量的自相关函数之间的关系，从而确定了Stokes随机波浪的波浪谱密度及海水质点水平速度和加速度谱密度，进而求得有关波浪要素的均方根值。文章还应有数值计算方法，分析了波浪基本参数对均方根值的影响。     

不规则波远破波对直墙的作用

基于物模试验、理论推理、因次分析和工程实例验证等综合分析方法,就不规则波远破波对直墙作用力的计算方法进行了研究,用推荐的方法得到的结果与工程实例符合较好.     

厚碳酸盐覆盖区RVSP三维地震勘探应用效果分析

该文以中国南方一厚碳酸盐岩覆盖区的RVSP三维地震勘探实例,对RVSP三维地震勘探观测系统和数据采集参数的确定、地面等效处理和波场分离等关键处理技术及地质效果进行了阐述和分析,说明了RVSP在克服表浅层复杂地质条件及环境条件对资料的影响及提高地震资料的分辨率有其特定的优势,同时也提出了RVSP三维地震在采集和处理过程中的难点。     

Determination of the Critical Value of Deflection for Embedded Cylindrical Structures

An embedded cylinder is a large-diameter cylinder embedded in a soil foundation. The state of failure of such an embedded cylindrical structure shows large deflection instead of slide and overturn of the traditional gravity type of structure placed on a rubble base or foundation base. The critical value of deflection of the embedded cylindrical structure, which is the maximum allowable deflection for stability calculation of the cylinder, is a vital control value. Through investigation on deflection and soil pressures on an embedded cylinder by model experiments, the variations of the angle of rotation θ of a cylinder with effective anti-overturning ratio η and moment MH of thrust are discussed. On the basis of experimental study, the critical value of deflection of the cylindrical structure is proposed in the paper. Meanwhile, the formulas for calculating deflection of cylinders are derived.     

风暴期间黄河水下三角洲波浪变形

为确定适用黄河三角洲的波动理论，对黄河三角洲风暴期间及前后波浪连续观测资料进行了处理，将其投在komar波浪理论分区图中后，分析了风暴期间黄河水下三角洲波浪的波形特征，发现站位所在地适合的波浪理论主要为艾里波和斯托克斯波，风暴期间波浪变形，还存在少量超过极限波陡线的波浪，通过比较常见的极限波陡线，看出Miche曲线比较适合该研究区。     

碟形越浪式波能发电装置的三维数值模拟

基于计算流体力学软件的三维数值模拟技术,分析了碟形越浪式波能发电装置的越浪性能,通过构建基于水气两相VOF(Volume of Fluid)模型的三维数值波浪水槽对该装置进行三维数值模拟研究,数值计算结果与物理试验结果相互对比验证较为吻合,验证了所构建的三维数值波浪水槽的可靠性,通过考察装置的坡度、导流叶片个数、干舷高度对越浪性能的影响确定装置的最优结构参数。结果表明,在装置的斜坡面边缘增加回流板可减少波浪的反射,提高装置的越浪性能。在数值模拟中将装置的斜坡面边缘处安装回流板对碟形越浪式波能发电装置参数进行优化,通过分析回流板的长度对装置越浪性能的影响来探索最优回流板长度。     

Parabolic Wave Propagation Modelling in Orthogonal Coordinate Systems

This paper presents a numerical model study of the propagation of water waves using the parabolic approximation of the mild-slope equation in the orthogonal coordinate system. Two types of coordinate systems are studied: (a) a general form of orthogonal coordinate system and (b) the conformal system, a special form of orthogonal coordinate system. Two typical examples, namely, expanded breakwaters and a circular channel, are studied to validate the model. First, the examples are studied by use of the general orthogonal coordinates. Then the same examples are computed by use of the confonnal system. The computational results show that the confonnal coordinate system generally gives better predictions than the general orthogonal system. A numerical technique for generating the conformal grid is combined with the numerical model to improve the practicability of the model. The comparison between the result from the numerical grid system and that from the analytical grid system shows that reliable computational results can be obtained by use of the numerical confonnal grid system.