Mid‐Holocene sub‐blanket‐peat alluvia and sediment sources in the upper Liffey valley,Co. Wicklow,Ireland

A recently exposed section across a ?rst‐order valley buried beneath the regional blanket peat on hillside slopes in the upper Liffey valley, Co. Wicklow, is described. The section shows two alluvia within a shallow valley form underlain by an extensive boulder and stone line over regional till and weathered granite. ¹⁴C dates from wood in the alluvia indicate the older alluvium to have formed between 4324 ± 53 BP and 4126 ± 45 BP and the younger between 3217 ± 53 BP and 2975 ± 53 BP . The basal layer of the overlying peat yielded a date of 2208 ± 61 BP . The younger alluvium shows the effects of soil paludi?cation prior to the peat expansion. Dated pollen analyses elsewhere in the upper catchment con?rm the spread of blanket peat over most areas above 350 m after 4000–3600 BP . The buried valley was contributing sediments to the mid‐Holocene ?oodplains in the upper Liffey valley prior to the extension of blanket peat over the catchment after which sediment yields from it and the other catchment slopes declined. Copyright © 2003 John Wiley & Sons, Ltd.     

Simulation and measurement of surface shear stress over isolated and closely spaced transverse dunes in a wind tunnel

Topographic interactions generate multidirectional and unsteady air?ow that limits the application of velocity pro?le approaches for estimating sediment transport over dunes. Results are presented from a series of wind tunnel simulations using Irwin‐type surface‐mounted pressure sensors to measure shear stress variability directly at the surface over both isolated and closely spaced sharp‐crested model dunes. Findings complement existing theories on secondary air?ow effects on stoss transport dynamics and provide new information on the in?uence of lee‐side air?ow patterns on dune morphodynamics. For all speeds investigated, turbulent unsteadiness at the dune toe indicates a greater, more variable surface shear, despite a signi?cant drop in time‐averaged measurements of streamwise shear stress at this location. This effect is believed suf?cient to inhibit sediment deposition at the toe and may be responsible for documented intermittency in sand transport in the toe region. On the stoss slope, streamline compression and ?ow acceleration cause an increase in ?ow steadiness and shear stress to a maximum at the crest that is double that at the toe of the isolated dune and 60–70 per cent greater than at ?ow reattachment on the lower stoss of closely spaced dunes. Streamwise ?ow accelerations, rather than turbulence, have greater in?uence on stress generation on the stoss and this effect increases with stoss slope distance and with incident wind speed. Reversed ?ow within the separation cell generates signi?cant surface shear (30–40 per cent of maximum values) for both spacings. This supports ?eld studies that suggest reversed ?ow is competent enough to return sediment to the dune directly or in a de?ected direction. High variability in shear at reattachment indicates impact of a turbulent shear layer that, despite low values of time‐averaged streamwise stress in this region, would inhibit sediment accumulation. Downwind of reattachment, shear stress and ?ow steadiness increase within 6 h (h = dune height) of reattachment and approach upwind values by 25 h. A distance of at least 30 h is suggested for full boundary layer recovery, which is comparable to ?uvial estimates. The Irwin sensor used in this study provides a reliable means to measure skin friction force responsible for sand transport and its robust, simple, and cost‐effective design shows promise for validating these ?ndings in natural dune settings. Copyright © 2003 John Wiley & Sons, Ltd.     

Optimal distribution of linear control intensity over the frequency range

In this paper, a control strategy for structural systems is proposed and developed in the frequency domain. The algorithm is substantially based on a linear derivative feedback and a convolution of the control parameter, whose distribution in the frequency field is chosen in such a manner as to comply with the requirements of an ad hoc formulated constrained optimum problem, with the response data monitored until the instant of control action application. Some numerical testing is carried out by referring to given recorded accelerograms, showing a good performance of the proposed approach. Copyright © 2002 John Wiley & Sons, Ltd.     

Sliding fragility of block‐type non‐structural components. Part 1: Unrestrained components

Motivated by the development of performance‐based design guidelines with emphasis on both structural and non‐structural systems, this paper focuses on seismic vulnerability assessment of block‐type unrestrained non‐structural components under sliding response on the basis of seismic inputs specified by current seismic codes. Two sliding‐related failure modes are considered: excessive relative displacement and excessive absolute acceleration. It is shown that an upper bound for the absolute acceleration response can be assessed deterministically, for which a simple yet completely general equation is proposed. In contrast, fragility curves are proposed as an appropriate tool to evaluate the excessive relative displacement failure mode. Sample fragility curves developed through Monte‐Carlo simulations show that fragility estimates obtained without taking into account vertical base accelerations can be significantly unconservative, especially for relatively large values of the coefficient of friction. It is also found that reasonable estimates of relative displacement response at stories other than the ground in multistorey buildings cannot in general be obtained by simply scaling the ground acceleration to the peak acceleration at the corresponding storey. Failure modes considered in this study are found to be essentially independent of each other, a property that greatly simplifies assessment of conditional limit states. Copyright © 2002 John Wiley & Sons, Ltd.     

A procedure for evaluating seismic energy demand of framed structures

Energy serves as an alternative index to response quantities like force or displacement to include the duration‐related seismic damage effect. A procedure to evaluate the absorbed energy in a multistorey frame from energy spectra was developed. For low‐ to medium‐rise frames, it required a static pushover analysis of the structure to determine the modal yield force and ductility factor of an equivalent single‐degree‐of‐freedom system for the first two modes. The energy spectra were then used to determine the energy contribution of each mode. A procedure was also developed to distribute the energy along the frame height based on energy shapes. This study showed that the second‐mode response in some cases needs to be considered to reflect the energy (or damage) concentration in the upper floors. Copyright © 2002 John Wiley & Sons, Ltd.     

停止开采深层地下水 修复与改善生态环境

沧州市水资源短缺，深层地下水严重超采，已形成大面积区域地下水位降落漏斗，地面沉降已达2m，生态环境严重恶化．为保障经济社会的可持续发展，要积极引调地表水，开发利用地下咸水，加强雨洪控制利用，逐步替代最后终止深层地下水的开采。从根本上修复和改善生态环境。     

利用卫星测高空间技术建立数字化海洋

论述了卫星测高空间技术的主要特征、科学意义及其在军事和经济建设领域的重要价值，阐明了国内外测高卫星系统的发展现状及利用卫星测高空间技术建立数字化海洋所取得的成果，分析卫星测高目前的研究方向，提出了发展我国卫星测高空间技术以及利用该技术建立数字化海洋的一些建议。     

Observing artificially induced strain: implications for subglacial deformation

By analysing a series of four successive thin‐sections from a ceramic clay that was subjected to uniaxial compression, we were able to monitor the development of microstructures in a fine‐grained sediment. The artificially induced microstructures, such as unidirectional clay reorientations and linear and circular grain arrangements, are identical to features that have been observed in thin‐sections of subglacially deformed tills, and therefore may be used as representative analogues. We argue that the structures, reflecting slip, planar shear displacements as well as rotational movements, can be explained by assuming a Coulomb‐plastic response to imposed shear. We conclude that sediments subjected to subglacial deformation behave as Coulomb materials, at least during the final stages of the deformation. The present study bridges the gap between field studies, experimental studies and theoretical modelling. The microscopic observations assist in visualising inferred subglacial processes and facilitate up‐ and downscaling between diverse methodological approaches. Copyright © 2003 John Wiley & Sons, Ltd.     

Possible refugia for reefs in times of environmental stress

This paper investigates the refuge potential of (1) upwelling areas, (2) coral areas at medium depth, and (3) offshore bank and island reefs in a scenario of increased global warming, and thus increased sea surface temperature (SST) and increased solar UV radiation. (1) Observations on coral health and water temperature in the subtropical Atlantic (Eleuthera and Cat Island, Bahamas) and Indian Ocean (Sodwana Bay, South Africa) suggest a link between cool water delivered by upwelling and coral health. After the 1998 bleaching event, caused by strong SST anomalies, coral health and recovery from the previous year's bleaching was significantly better on the narrow southern Cat Island shelf (70% of corals healthy) where the presence of cold water was observed, which was attributed to small-scale upwelling, than on the wide northern Eleuthera shelf (44% of corals healthy), where downwelling of hot bank waters was believed to have damaged corals. In South Africa, regular, short-term upwelling events in five summers reduced SST to well below bleaching level. (2) In the northern Red Sea (Safaga Bay) and in South Africa (Sodwana Bay), wide areas with either coral frameworks or non-framework communities exist. Calculations show that if the top 10 m (20 m) of the ocean became inhospitable to corals, still 50.4% (17.5%) of the coral area would remain intact in the Red Sea and 99% (40%) in South Africa. (3) Offshore bank and island reefs investigated in the Turks, Caicos, and Mouchoir Banks and Grand and Little Cayman showed high rates of mortality and coral diseases. The most remote sites (Mouchoir Bank) were not the healthiest. Refuge areas appear to exist in (1) and (2), but in (3) only if vigorous water-circulation is encountered.     

Theoretical Study on Stochastic Modeling of Combined Gravity-Magnetic-Electric-Seismic Inversion and Its Application

As gravity field,magnetic field,electric field and seismic wave field are all physical fields,their object function,reverse function and compound function are certainly infinite contiuously differentiable func-tions which can be expanded into Taylor (Fourier) series within domain of definition and be further reduced in-to solving stochastic distribution function of series and statistic inference of optimal approximation,This is the basis of combined gravity-magnetic-electric-seismic inversion built on the basis of separation of field and source gravity-magnetic difference-value(D-value)trend surface,taking distribution-independent fault sys-tem as its unit,depths of seismic and electric interfaces of interests as its corresponding bivariate compound re-verse function of gravity-magnetic anomalies and using high order polynomial(high order trigonometric func-tion)approximating to its series distribution,The difference from current dominant inversion techniques is that,first,it does not respectively create gravity-seismic,magnetic-seismic deterministic inversion model from theoretical model,but combines gravity-magnetic-electric-seismic stochastic inversion model from stochastic model;second,after the concept of equivalent geological body being introduced,using feature of independent variable of gravity-magnetic field functions,taking density and susceptibility related to gravity-magnetic func-tion as default parameters of model,the deterministic model is established owing to better solution to the con-tradictioc of difficulty in identifying strata and less test analytical data for density and susceptibility in newly explored area;third,under assumption of independent parent distribution,a real modeling by strata,the prob-lem of difficult plane closure arising in profile modeling is avoided,This technology has richer and more detailed fault and strata information than sparse pattern seismic data in newly explored area,successfully inverses and plots structural map of Indosinian discontinuty in Hefei basin with combined gravity-magnetic-electric-seismic inversion,With development of high precision gravity-magnetic and overall geophysical technology,it is certain for introducing new methods of stochastic modeling and computational intelligence and promoting the develop-ment of combined gravity-magnetic-electric-seismic inversion to open a new substantial and promoting the develop-ment of combined gravity-magnetic-electric-seismic inversion to open a new substantial path.