Study of the flood control scheduling scheme for the Three Gorges Reservoir in a catastrophic flood

The Three Gorges Project is the world's largest water conservancy project. According to the design standards for the 1,000‐year flood, flood diversion areas in the Jingjiang reach of the Yangtze River must be utilized to ensure the safety of the Jingjiang area and the city of Wuhan. However, once these areas are used, the economic and life loss in these areas may be very great. Therefore, it is vital to reduce this loss by developing a scheme that reduces the use of the flood diversion areas through flood regulation by the Three Gorges Reservoir (TGR), under the premise of ensuring the safety of the Three Gorges Dam. For a 1,000‐year flood on the basis of a highly destructive flood in 1954, this paper evaluates scheduling schemes in which flood diversion areas are or are not used. The schemes are simulated based on 2.5‐m resolution reservoir topography and an optimized model of dynamic capacity flood regulation. The simulation results show the following. (a) In accord with the normal flood‐control regulation discharge, the maximum water level above the dam should be not more than 175 m, which ensures the safety of the dam and reservoir area. However, it is necessary to utilize the flood diversion areas within the Jingjiang area, and flood discharge can reach 2.81 billion m³. (b) In the case of relying on the TGR to impound floodwaters independently rather than using the flood diversion areas, the maximum water level above the dam reaches 177.35 m, which is less than the flood check level of 180.4 m to ensure the safety of the Three Gorges Dam. The average increase of the TGR water level in the Chongqing area is not more than 0.11 m, which indicates no significant effect on the upstream reservoir area. Comparing the various scheduling schemes, when the flood diversion areas are not used, it is believed that the TGR can execute safe flood control for a 1,000‐year flood, thereby greatly reducing flood damage.     

可持续发展进程中的政府能力建设

可持续发展作为现代化建设的两大战略之一 ,对我国政府的能力提出了挑战。可持续发展战略的实施 ,要求加强政府的作用 ,将政府建设成为强有力而又廉价的政府。为此 ,我国政府应从加强政府的财政汲取能力建设、强化中央政府协调地区发展的能力 ,加强政府调控能力建设、强化中央政府协调当前利益和长远利益、经济利益与生态效益的能力 ,并从根本上转变政府职能、精兵简政、建设廉价高效的政府等方面着手来提高我国政府推进和实施可持续发展战略的能力     

冰碛扇型砂金矿床特征及其成矿初探

成生于冰碛扇内，经一定的生物、物理、化学成矿作用，以砂金形态分布而富集成矿的金矿称为冰碛扇型砂金矿床。它具有沿造山带一定标高范围成群、成带分布，沉积物为近源且半胶结，砂金呈面状分布，并以粒金、块金为主，具胶状、浑圆状、包块状构造形态，分布极不均匀等特征。冰碛扇型砂金矿床的成矿作用与河成砂金矿床有本质的区别。它的成矿作用模式是：造山带下地壳富含的活化金通过新构造运动活化的断裂运移地表，经地下流体和地表流体的迁移聚集到冰碛扇这一封闭稳定的生物、物理、化学障环境中，主要经高效聚金微生物有机胶体成矿作用沉淀、再生加大形成砂金，逐步富集成矿床。而红色磨拉石建造中风化离解的Ｆｅ，Ｍｎ物质对沉淀环境ｐＨ值起着一定的调节作用。冰碛扇型砂金矿床在我国西部造山带内广泛分布，具有一定的工业价值，是砂金矿床中一重要类型，应予以重视     

THE SIMULATED STORAGE CAPACITY OF FLOOD AND WATERLOGGING IN THE TYPICAL AGRICULTURAL REGION IN JIANGHAN PLAIN

１ＩＮＴＲＯＤＵＣＴＩＯＮＪｉａｎｇｈａｎＰｌａｉｎｉｓｏｎｅｏｆｔｈｅｉｍｐｏｒｔａｎｔｂａｓｅｓｏｆＣｈｉｎａ′ｓａｇｒｉｃｕｌｔｕｒａｌｐｒｏｄｕｃｔｉｖｉｔｙｌｏｃａｔｅｄｉｎｔｈｅｍｉｄｄｌｅＣｈａｎｇｊｉａｎｇＲｉｖｅｒｖａｌｌｅｙｏｆｃｅｎｔｒａｌＣｈｉｎａ．ＴｈｅＪｉａｎｇｈａｎｐｌａｉｎａｐｐｒｏｘｉｍａｔｅｌｙ６．６×１０４ｋｍ２ｉｎａｒｅａａｎｄｏｖｅｒ３０ｍｉｌｌｉｏｎｉｎｐｏｐｕｌａｔｉｏｎｉｓｔｈｅｒｅｎｏｗｎｅｄ“ｃｏｕｎｔｒｙｏｆｆｉｓｈａｎｄｒｉｃｅ＂ｉｎ…     

基于统一强度理论的地基临界荷载公式

基于统一强度理论,按照临界荷载公式的推导方法,得到地基临界荷载的统一解公式。Mohr-Coulomb强度理论计算的结果为其特例。把计算结果与《建筑地基基础设计规范》中的结果进行了对比分析,认为当不同程度地考虑中间主应力σ2的影响时,可以有效地发挥地基的强度潜能。并通过实例计算了统一强度理论参数b取不同值时地基承载力特征值,并进行了对比分析。     

Use of sinkhole and specific capacity distributions to assess vertical gradients in a karst aquifer

The carbonate-rock aquifer in the Great Valley, West Virginia, USA, was evaluated using a database of 687 sinkholes and 350 specific capacity tests to assess structural, lithologic, and topographic influences on the groundwater flow system. The enhanced permeability of the aquifer is characterized in part by the many sinkholes, springs, and solutionally enlarged fractures throughout the valley. Yet, vertical components of subsurface flow in this highly heterogeneous aquifer are currently not well understood. To address this problem, this study examines the apparent relation between geologic features of the aquifer and two spatial indices of enhanced permeability attributed to aquifer karstification: (1) the distribution of sinkholes and (2) the occurrence of wells with relatively high specific capacity. Statistical results indicate that sinkholes (funnel and collapse) occur primarily along cleavage and bedding planes parallel to subparallel to strike where lateral or downward vertical gradients are highest. Conversely, high specific capacity values are common along prominent joints perpendicular or oblique to strike. The similarity of the latter distribution to that of springs suggests these fractures are areas of upward-convergent flow. These differences between sinkhole and high specific capacity distributions suggest vertical flow components are primarily controlled by the orientation of geologic structure and associated subsurface fracturing.     

Design of shallow foundations under tensile loading for transmission line towers: An overview

Tensioned foundations are common in civil engineering applications such as transmission towers, harbors, offshore structures, basement slabs under pressure, industrial equipment, etc. Procedures for the design of tensioned foundations are discussed in this paper, including specific recommendations for more common transmission tower foundations. Starting from a distinction between shallow and deep modes of failure, the paper presents the most common failure mechanisms for shallow failure in tension, including procedures for calculation of foundation tensile capacity under vertical and inclined loading. Emphasis is given to the influence of the strength of the compacted backfill compared to the strength of the natural soil, including presentation of results of full-scale loading tests.     

Heat capacity and phase equilibria of wadeite-type K2Si4O9

The low-temperature heat capacity (C _p) of Si-wadeite (K₂Si₄O₉) synthesized with a piston cylinder device was measured over the range of 5–303 K using the heat capacity option of a physical properties measurement system. The entropy of Si-wadeite at standard temperature and pressure calculated from the measured heat capacity data is 253.8 ± 0.6 J mol⁻¹ K⁻¹, which is considerably larger than some of the previous estimated values. The calculated phase transition boundaries in the system K₂O–Al₂O₃–SiO₂ are generally consistent with previous experimental results. Together with our calculated phase boundaries, seven multi-anvil experiments at 1,400 K and 6.0–7.7 GPa suggest that no equilibrium stability field of kalsilite + coesite intervenes between the stability field of sanidine and that of coesite + kyanite + Si-wadeite, in contrast to previous predictions. First-order approximations were undertaken to calculate the phase diagram in the system K₂Si₄O₉ at lower pressure and temperature. Large discrepancies were shown between the calculated diagram compared with previously published versions, suggesting that further experimental or/and calorimetric work is needed to better constrain the low-pressure phase relations of the K₂Si₄O₉ polymorphs. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Assessment of disaster resilience capacity of hillslope communities with high risk for geological hazards

This study presents a novel preparedness assessment method for assessing hazard mitigation and environmental planning of hillslope communities. A professional questionnaire was utilized to weight each indicator. Communities in Hsinchu, Taichung and Nantou counties with debris flow hazards were taken as study samples. Debris flow risk and landslide susceptibility for each community were determined using Geographic Information System (GIS) technology and logistic regression analysis. Thus, a novel risk assessment method for evaluating disaster resilience capacity of hillslope communities was established. This method was then applied to assess casualties caused by Typhoon Herb in 1996 and Typhoon Mindulle in 2004. Additionally, the analytical results generated by this assessment method were discussed with the aim of developing references for implementation of risk analysis, increasing the effectiveness of disaster mitigation, and reducing future loss of life and property.     

Interference of Multiple Strip Footings on Sand Using Small Scale Model Tests

By using small scale model tests, the interference effect on the vertical load-deformation behavior of a number of equally spaced strip footings, placed on the surface of dry sand, was investigated. At any stage, all the footings were assumed to (i) carry exactly equal magnitude of load, and (ii) settle to the same extent. No tilt of the footing was permitted. The effect of clear spacing (s) among footings on the results was explored. A new experimental setup was proposed in which only one footing needs to be employed rather than a number of footings. The bearing capacity increases continuously with decrease in spacing among the footings. The interference effect becomes further prominent with increase in soil friction angle. In contrast to an increase in the bearing capacity, with decrease in spacing of footings, an increase in the footing settlement associated with the ultimate state of shear failure was observed. The present experimental observations were similar to those predicted by the available theory, based on the method of characteristics. As compared to the theory, the present experimental data, however, indicates much greater effect of interference especially for larger spacing among footings.