Impact of the sampling duration on the uncertainty of averaged velocity measurements with acoustic instruments

Average velocity in streams is a key variable for the analysis and modelling of hydrological and hydraulic processes underpinning water resources science and practice. The present study evaluates the impact of the sampling duration on the quality of average velocity measurements acquired with contemporary instruments such as Acoustic Doppler Velocimeters (ADV) an Acoustic Doppler Current Profilers (ADCP). The evaluation combines considerations on turbulent flows and principles and configurations of acoustic instruments with practical experience in conducting customized analysis for uncertainty analysis purposes. The study sheds new insights on the spatial and temporal variability of the uncertainty in the measurement of average velocities due to variable sampling durations acting in isolation from other sources of uncertainties. Sampling durations of 90 and 150 s are found sufficient for ADV and ADCP, respectively, to obtain reliable average velocities in a flow affected only by natural turbulence and instrument noise. Larger sampling durations are needed for measurements in most of the natural streams exposed to additional sources of data variability.     

Effect of spatial variation characteristics on contouring of design storm depth

The ordinary kriging method, a geostatistical interpolation technique, was applied for developing contour maps of design storm depth in northern Taiwan using intensity–duration–frequency (IDF) data. Results of variogram modelling on design storm depths indicate that the design storms can be categorized into two distinct storm types: (i) storms of short duration and high spatial variation and (ii) storms of long duration and less spatial variation. For storms of the first category, the influence range of rainfall depth decreases when the recurrence interval increases, owing to the increasing degree of their spatial independence. However, for storms of the second category, the influence range of rainfall depth does not change significantly and has an average of approximately 72 km. For very extreme events, such as events of short duration and long recurrence interval, we do not recommend usage of the established design storm contours, because most of the interstation distances exceed the influence ranges. Our study concludes that the influence range of the design storm depth is dependent on the design duration and recurrence interval and is a key factor in developing design storm contours. Copyright © 2003 John Wiley & Sons, Ltd.     

太平洋波高分布及变化规律研究

使用 Topex/ Poseidon卫星高度计 1 992年 1 0月～ 1 998年 1 2月连续 75个月 ,2 30个重复周期的有效波高资料对南北太平洋的有效波高进行了统计 ,分析了太平洋有效波高的多年平均、多年各月平均和多年各季平均的空间分布特征和时间变化规律。结果表明 ,太平洋波高分布具有明显季节变化的规律 ,与太平洋的风速分布特征具有良好的对应关系     

Application of the first internal transcribed spacer(ITS-1) of ribosomal DNA as a molecular marker to population analysis in farrer''s scallop Chlamys farreri

Sequence variation of the first internal transcribed spacer of ribosomal DNA （ ITS - 1 ） was examined and its application to the study of genetic variation was explored in four populations of farter＇ s scallop Chlamys farreri. ITS - 1 fragments, with a length of about 300 bp,of 78 individuals collected from Dalian, Qingdao, Yantai in China and Korea respectively were amplified via PCR, cloned and sequenced. Intra-genomic variation was examined by sequencing several clones of single individuals. Alignment and polymorphism analysis detected 44 haplotypes and 50 polymorphic sites which consist of 30 substitutions and 20 indels, indicating a high level of polymorphisms. Sequence analysis also showed a very low level of intra-individual variation. All these features validated the feasibility of application of ITS - 1 fragment to population analysis. Polymorphism analysis showed that the Korea sample has the richest genetic variation, followed by Yantai and Qingdao samples. AMOVA （analysis of molecular variance） showed that the majority （96.26%） of genetic variation was distributed within populations and 3.74% resulted from among populations, but with P 〈 0.05 （ = 0.042）, indicating that the populations in this study have significant divergence. This output was basically concordant with the result arising from RAPD data and different from that from mitochondrial 16S rDNA sequence data. Discussion on this inconsistency was made accordingly.     

太平洋波高熵的分布变化规律研究

使用1992年IO月到1998年12月连续共75个月、230个重复周期的Topex／Poseidon卫星高度计有效波高资料，对南、北太平洋波高熵的空间分布特征和时间变化规律进行了研究。统计分析了太平洋波高熵的多年的空间分布特征和多年各月的时间变化规律。结果表明，太平洋波高熵呈现出中间低、南北高的马鞍形空间分布特征和明显季节变化的规律，与太平洋的平均有效波高和气候分布特征和变化规律相一致。给出了南北太平洋模拟波高熵的计算公式及计算稳定性检验。     

暴雨时程方程在中吉乌铁路(中国段)暴雨估算中的应用

根据中吉乌铁路（中国段）沿线10多个气象水文观测站40多年（建站至2000年）各历时最大降水量资料，对中吉乌铁路（中国段）暴雨强度进行系统的研究。应用熵气象学导出的暴雨时程方程，预测了中吉乌铁路（中国段）各历时最大降水量。这对于中吉乌铁路（中国段）工程设计和施工及未来铁路客运等具有重要的科学意义和工程价值。     

Timing of Fracture Formation and Duration of Mineralization at the Hishikari Deposit, Southern Kyushu, Japan

Abstract. The Hishikari epithermal gold deposit consists of the Honko-Sanjin zone and Yamada zone. On the basis of observed crosscutting relationships of veins, vein system in the Hishikari deposit was classified into the early and late veins. They differ from orientation, width, control by unconformity, the amount of displacement and structural features, but have similarity in gold grade and Au/Ag ratios. K-Ar ages are presented for the classified veins to clarify timing of fracturing and duration of mineralization.
Age determination revealed that the early veins in the Honko-Sanjin zone range from 0.86 to 1.11 Ma and that the late veins range from 0.73 to 0. 84 Ma. The economically most important mineralization in the Hishikari deposit occurred around 0.90 Ma in a very short period (about 0.05 million years).
The distribution of mineralization age in the whole Hishikari deposit, occurrences of slickensides and ground water temperatures imply that mineralization lasted longer in the southern part of the deposit. As compared the early veins with late veins, structural changes including width, strike, dip and vein characteristics occurred at around 0.85 Ma.     

Relationships between climatic factors and flower and boll production in Egyptian cotton (Gossypium barbadense)

Fruiting of cotton plant is determined and influenced by cultivar, climatic conditions, management practices and pests. An understanding of the flowering and boll retention patterns of cotton cultivars can contribute to more efficient and economical crop management. The objective of this investigation was to study the effect of various climatic factors on flower and boll production of Egyptian cotton. This could be used in formulating advanced predictions of the effect of certain climatic conditions on the production of Egyptian cotton. Two uniform field trials, using cotton Gossypium barbadense cv. Giza 75 were carried out in 1992 and 1993 at the Agricultural Research Station, Agricultural Research Center, Ministry of Agriculture, Giza, Egypt, to investigate the relationships between climatic factors, flower and boll production. Climatic factors included maximum and minimum air temperatures along with their difference, evaporation, surface soil temperature (grass temperature or green cover temperature) at 0600 and 1800 h°C⁻¹, sunshine duration, maximum and minimum humidity and wind speed. The effects of climatic factors on flower and boll production were quantified in the absence of water and nutritional deficits and damage effects of insects. Results obtained indicate that evaporation, sunshine duration, humidity, surface soil temperature at 1800 h, and maximum air temperature, were the important climatic factors that significantly affect flower and boll production of Egyptian cotton. Consequently, applying appropriate specific cultural practices that minimize the deleterious effect of these factors will lead to an improvement in cotton yield.     

Early Estimation of Strong Aftershock Duration Time

In order to solve the problem of early estimation of moderately strong aftershock duration time in an earthquake sequence,this study has been conducted.First,the definition of the strong aftershock has been given.It is pointed out that there is a difference in the strong aftershock duration time between the main shock type sequence and the strong earthquake swarm sequence.After dividing the three cases,i.e.,a strong aftershock duration time larger than 1 day,smaller than 1 day,and no strong aftershock occurred in a main shock type sequence by using the pattern recognition method,we gave the rough correlation relation between strong aftershock duration time and first large shock magnitude for two types of sequences.Finally,the judgment index and method of estimating strong aftershock duration times for different sequence types have been given.     

The effective number of cycles of earthquake ground motion

The seismic response of any system that accumulates damage under cyclic loading is dependent not only on the maximum amplitude of the motion but also its duration. This is explicitly recognized in methods for estimating the liquefaction potential of soil deposits. Many researchers have proposed that the effective number of cycles of the ground motion is a more robust indicator of the destructive capacity of the shaking than the duration. However, as is the case with strong‐motion duration, there is no universally accepted approach to determining the effective number of cycles of motion, and the different methods that have been proposed can give widely varying results for a particular accelerogram. Definitions of the effective number of cycles of motion are reviewed, classified and compared. Measurements are found to differ particularly for accelerograms with broad‐banded frequency content, which contain a significant number of non‐zero crossing peaks. The key seismological parameters influencing the number of cycles of motion and associated equations for predicting this quantity for future earthquakes are identified. Correlations between cycle counts and different duration measures are explored and found to be rather poor in the absence of additional parameters. Copyright © 2004 John Wiley & Sons, Ltd.