Long-chain alkenones and U37′ variability along a south–north transect in the Western Pacific Ocean

In this paper, we present 50 surface water samples collected during the IMAGES III cruise (June–July 1997) along a transect from New Zealand to the China Sea (42°S–178°E, 21°N–120°E) covering a temperature range from 13.3 to 30.4 °C. A very worthwhile aspect of this study is a coupling of both biomarker (alkenone) and coccolithophorid counting. We show that the U₃₇^k′–temperature relationship is very similar to the Prahl et al. [Geochim. Cosmochim. Acta 52 (1988) 2203] culture calibration and to the global core top calibration of Müller et al. [Geochim. Cosmochim. Acta 62 (1998) 1757]. However, in the warmest surface waters of the Western Pacific ocean (>26.4 °C) where Gephyrocapsa oceanica is likely the most widespread species, the associated U₃₇^k′ has a constant value of 1.0. The consequence is that above this temperature threshold, U₃₇^k′ cannot be used as an accurate paleothermometer.     

Analytical solutions of one‐dimensional infiltration before and after ponding

This paper is a continuation of previous research, which obtained a convenient solution for arbitrary surface fluxes before ponding. By means of Fourier Transformation this has been extended to derive analytical solutions of a linearized Richards' equation for arbitrary input fluxes after surface saturation. Copyright © 2003 John Wiley & Sons, Ltd.     

Discriminating between pore‐filling load and bed‐structure load: a new porosity‐based method,exemplified for the river Rhine

Sediments contained in the river bed do not necessarily contribute to morphological change. The finest part of the sediment mixture often fills the pores between the larger grains and can be removed without causing a drop in bed level. The discrimination between pore‐filling load and bed‐structure load, therefore, is of practical importance for morphological predictions. In this study, a new method is proposed to estimate the cut‐off grain size that forms the boundary between pore‐filling load and bed‐structure load. The method evaluates the pore structure of the river bed geometrically. Only detailed grain‐size distributions of the river bed are required as input to the method. A preliminary validation shows that the calculated porosity and cut‐off size values agree well with experimental data. Application of the new cut‐off size method to the river Rhine demonstrates that the estimated cut‐off size decreases in a downstream direction from about 2 to 0·05 mm, covariant with the downstream fining of bed sediments. Grain size fractions that are pore‐filling load in the upstream part of the river thus gradually become bed‐structure load in the downstream part. The estimated (mass) percentage of pore‐filling load in the river bed ranges from 0% in areas with a unimodal river bed, to about 22% in reaches with a bimodal sand‐gravel bed. The estimated bed porosity varies between 0·15 and 0·35, which is considerably less than the often‐used standard value of 0·40. The predicted cut‐off size between pore‐filling load and bed‐structure load (D_c,p) is fundamentally different from the cut‐off size between wash‐load and bed‐material load (D_c,w), irrespective of the method used to determine D_c,p or D_c,w. D_c,w values are in the order of 10^?1 mm and mainly dependent on the flow characteristics, whereas D_c,p values are generally much larger (about 10⁰ mm in gravel‐bed rivers) and dependent on the bed composition. Knowledge of D_c,w is important for the prediction of the total sediment transport in a river (including suspended fines that do not interact with the bed), whereas knowledge of D_c,p helps to improve morphological predictions, especially if spatial variations in D_c,p are taken into account. An alternative to using a spatially variable value of D_c,p in morphological models is to use a spatially variable bed porosity, which can also be predicted with the new method. In addition to the morphological benefits, the new method also has sedimentological applications. The possibility to determine quickly whether a sediment mixture is clast‐supported or matrix‐supported may help to better understand downstream fining trends, sediment entrainment thresholds and variations in hydraulic conductivity.     

库车坳陷大北地区下白垩统巴什基奇克组储层成因地质分挝

塔里木盆地库车坳陷大北地区白垩系巴什基奇克组储层以细一中粒岩屑砂岩为主夹少量长石岩屑砂岩,杂基为铁泥质和泥质(2%～10%).胶结物以方解石(3%～15%)为主.粘土矿物以伊利石、绿泥石和伊/蒙混层为主,不含高岭石,伊/蒙混层中的蒙皂石含量一般为(15～20)%;主要孔隙组合为残余原生粒问孔-溶蚀孔-微孔隙,占储集空间总量的(50～90)%,其次为构造缝-溶蚀孔,主要的孔隙类型为溶蚀孔和裂缝,总体属于低孔低渗-特低孔特低渗储层.综合分析认为:阶段性的前陆构造逆冲推覆作用对沉积旋回性、水体盐度变化及物源区距离变化的控制至关重要;构造活跃期扇三角洲前缘环境中形成的差分选中-粗砂岩、近源快速堆积造成的高岩屑含量、干旱成湖导致的高碳酸盐胶结和早成岩期相对深埋-后期持续快速深埋压实作用,是特低孔特低渗储层的主要成因;而较优质储层足构造平缓期辫状河三角洲前缘环境中形成的分选好的中-细砂岩、早期表生溶蚀及弱碳酸盐胶结作用、早期构造破裂的复合作用及其叠加效应的结果.     

辽东湾S2冰侧限剪切强度的试验研究

利用试验方法系统地研究了辽东湾S2型海冰侧限剪切强度随剪切应变速率、加载方向、法向应力、温度和冰内孔隙率的变化规律。介绍了S2型海冰各向异性特点及剪切应变速率对剪切破坏方式的效应和韧脆破坏转变的条件。分析了不同加载方向海冰峰值剪切强度的差异 ,获得 - 6 2℃温度下S2冰内摩擦角和内聚力分别为 42°和 70 0kPa。利用统计分析给出峰值剪切强度与冰温和孔隙率的试验关系     

利用归一化层速度预测和研究储层物性的方法

归一化层速度是对任意深度处的层速度进行归一化处理的一种速度形式，归一化处理的目的是把任意深度处的层速度转换为与深度无关的格式，归一化后层速度的横向变化主要取决于地层岩性，孔隙度等物性的变化，利用这一特点可以方便地利用已知钻井资料对其进行标定，比较简单地进行地层岩性，孔隙度等特性的预测。实际应用表明，其预测结果与钻井揭示吻合较好，预测效果令人满意。     

台湾海峡上升流区夏季溶解氧的特征

本文根据1983—1984年,1987—1988年台湾海峡中北部海域调查资料,着重讨论了该海域夏季溶解氧分布特征及其与上升流、生物活动的关系。该上升流区温度、盐度、溶解氧含量及其饱和度的特征值分别为24.4℃,34.3,4.49mlO_2/L和93％。溶解氧含量及其饱和度与温度呈正相关关系,与盐度呈负相关关系。     

磁通门罗盘的原理

磁通门罗盘是一种新型罗盘。此罗盘的关键部件是探头,探头主要是由高导磁的软磁材料做成的磁环和线圈组成。当在初级线圈加上交变的激励信号时,即可得到与次级线圈在地磁场中相对应的磁方位角。本文介绍其原理,并对其进行了理论分析。     

松散沉积物中天然气水合物生成、分解过程与声学特性的实验研究

为了解松散沉积物中天然气水合物的生成和分解规律以及水合物对沉积物声学特性的影响,在粒径为0.18~0.28mm天然沙中进行了甲烷水合物的生成和分解实验,并利用超声波探测技术和时域反射技术实时测量了反应体系的声学参数与含水量。结果表明:根据水合物的生成和分解速率,可将水合物的生成过程分为初始生长期、快速生长期和稳定期3个阶段,分解过程可分为初始分解期和样品表层水合物快速分解期以及样品内、外层水合物均快速分解期3个阶段;由温度和压力数据的分析,得出水合物先在沉积物表层生长,然后在沉积物内、外层迅速生成;由水合物分解过程3个阶段的平均分解率,得出水合物的分解是一个由慢到快的过程。对声学参数的研究表明:水合物在松散沉积物中先胶结骨架颗粒而生成,使纵波速度和声波衰减在饱和度0~1%之间陡然增大;随后水合物开始在沉积物孔隙中形成悬浮粒子,造成超声波信号在饱和度1%~90%间淬熄,声波速度无法获取。研究结果在揭示沉积物中水合物与颗粒间接触机制的同时,为海上地球物理勘探中地震信号的解释提供了新的思路。     

数值模拟技术在海坨子油田开发调整研究中的应用

讨论分析数值模拟技术在海坨子油田开发调整研究中的思路和方法,采用美国Landmark公司VIP2003．4版本数值模拟软件包进行模拟研究,通过参数准备,静、动态拟合,模拟出海坨子油田海S9—11井组1—9砂组各小层剩余储量大小及不同阶段流体饱和度分布,结合可视化技术形象描述了海坨子油田剩余油变化规律及潜力区,在此基础上预测不同井网加密方式开发指标,并优选出最佳方案,为海坨子油田下步开发调整提供了重要依据,取得了较好的效果。