公用微机硬盘信息保护的一种有效方法

介绍一种保护公用微机硬盘信息的有效方法．不仅可以预防各种计算机病毒，更重要的是可以防止人为操作对硬盘信息的破坏。适用于学校等开放性微机实验室的信息安全与保护．     

A Preliminary Study of Shear Wave in Seafloor Surface Sediments

This article preliminarily reports and analyses the transmission characteristics and behaviors of shear wave in the offshore seafloor surface sediments in China, discusses the relationships between the physical and mechanical features of the shear wave and the compression wave, and compares the testing results with that of Hamilton and Chen et al. The result shows that the shear wave can be tested if the seafloor surface sediment has tangent modulus. The shear wave velocity ranges from 50-600 m/s and the measuring frequency from 50-200 kHz. The sound velocity rate of shear wave and compression wave can be used to appraise the stress-strain feature of seafloor surface sediments. This study provides a basis for further describing and appraising the seafloor sedimentary acoustic-mechanical feature and building a geological-acoustic model on China's offshore sea area.     

About the specification of erosion flux for soft stratified cohesive sediments

The present paper deals with the specification of bed erosion flux that accounts for the effects of sediment-induced stratification in the water column. Owing to difficulties in measuring the bed shear stress _b and the erosive shear strength _s, we suggest a series of methods that combine laboratory and numerical experiments. A simplified turbulent transport model that includes these effects helps to quantify _b and _s. Focusing on soft stratified beds, the present study considers erosion rate formulas of the form =_f exp {[T_b-T_s]} where is a model constant (=1 for Gularte's (1978) formula and =1/2 for Parchure's (1984) formula). First, the bed erosive strength profile _s(Z) is adjusted by forcing the turbulent transport model with measured erosion rates. Second, three procedures are suggested to determine the erosion rate formula coefficients _f and : a global procedure and two different layer-by-layer procedures. Each procedure is applied to an erosion experiment conducted in a rotating annular flume by Villaret and Paulic (1986). The use of the layer-by-layer procedure based on a least squares fitting technique provides a closer fit than the global procedure. The present study points out the complementarity of experimental and numerical approaches and also suggests possible improvements in laboratory test procedures.     

Automatic equipment to monitor groundwater radon

Prototype instrumentation, able to automatically measure groundwater radon content variations, is presented. The equipment is made of stainless steel and has spherical valves with automatic and pneumatic control. The deemanation of the gases from the water is obtained by evacuating a suitable expansion chamber. The instrumentation can make discrete sampling ranging from 1 per hour to 1 per 99 hours. The equipment was tested in the laboratory: the efficiency was measured by means of a²⁶⁶Ra solution. A mean value of (0.65±0.07) count/s/Bq was obtained. A calibration test was carried out by comparing countings from the automatic equipment with those obtained by the standard laboratory cell. Results of an operational check over a period of approximately one year indicate that variations in radon at the calibration site are attributable more to meteorological than to tectonic causes.     

Permeability of Hydraulic Fills and Barricade Bricks

Permeability is one of the most important parameters in the design of hydraulic backfilling of mine stopes. A simple and reproducible method was developed for preparing reconstituted hydraulic fill sample in the laboratory, that is representative of the hydraulic fill in the mine stope, replicating the slurry sedimentation process taking place in the mine. Constant head and falling head permeability tests were carried out on the samples, giving consistent results. A brick permeameter was developed to study the flow characteristics of the porous barricade bricks under one-dimensional flow, simulating the flow conditions in the mine. Three different methods were used to determine the permeability of the brick and the results showed very good agreement. This is the first rational attempt to measure the permeability of the porous barricade bricks that are used to close the horizontal access drives in the mines, thus retaining the hydraulic fill. The measurements show that the permeability of the barricade brick is about two to three orders of magnitude greater than that of the hydraulic fill.     

Site Investigation for the Effects of Vegetation on Ground Stability

The procedure for geotechnical site investigation is well established but little attention is currently given to investigating the potential of vegetation to assist with ground stability. This paper describes how routine investigation procedures may be adapted to consider the effects of the vegetation. It is recommended that the major part of the vegetation investigation is carried out, at relatively low cost, during the preliminary (desk) study phase of the investigation when there is maximum flexibility to take account of findings in the proposed design and construction. The techniques available for investigation of the effects of vegetation are reviewed and references provided for further consideration. As for general geotechnical investigation work, it is important that a balance of effort is maintained in the vegetation investigation between (a) site characterisation (defining and identifying the existing and proposed vegetation to suit the site and ground conditions), (b) testing (in-situ and laboratory testing of the vegetation and root systems to provide design parameters) and (c) modelling (to analyse the vegetation effects).     

Geomechanical Properties of Shear Zones in the Eastern Aar Massif,Switzerland and their Implication on Tunnelling

Summary ¶Rock zones containing a high fracture density and/or soft, low cohesion materials can be highly problematic when encountered during tunnel excavation. For example in the eastern Aar massif of central Switzerland, experiences during the construction of the Gotthard highway tunnel showed that heavily fractured areas within shear zones were responsible for overbreaks in the form of chimneys several metres in height. To understand and estimate the impact of the shear zones on rock mass behaviour, knowledge concerning the rock mass strength and deformation characteristics is fundamental. A series of laboratory triaxial tests, performed on samples from granite- and gneiss-hosted shear zones revealed that with increasing degree of tectonic overprint, sample strength decreases and rock behaviour shows a transition from brittle to ductile deformation. These trends may be explained by increasing fracture densities, increasing foliation intensity, increasing thickness of fine-grained, low cohesion fracture infill, and increasing mica content associated with the increasing degree of tectonic overprint. As fracture density increases and the influence of discrete, persistent discontinuities on rock mass strength decreases, behaviour of the test samples becomes more and more representative of rock mass behaviour, i.e. that of a densely fractured continuum. For the purpose of numerical modeling calculations, the shear zones may be subdivided with respect to an increasing fracture density, foliation intensity and mica content into a strongly foliated zone, a fractured zone and a cohesionless zone, which in turn exhibit brittle, brittle-ductile and ductile rock mass constitutive behaviour, respectively.Received December 17, 2001; accepted January 9, 2003 Published online April 29, 2003     

Empirical correlations of soil parameters based on Cone Penetration Tests (CPT) for Greek soils

This study presents the results of Cone Penetration Tests (CPT) and estimated correlations with the results of other in-situ tests (standard penetration test, cross-hole, seismocone) and laboratory tests (classification and undrained shear strength tests). These tests cover nearly all types of penetrable soils in Greece and, together with the formulation of empirical correlations, complement and improve on previous studies due to the significant number of CPT measurements.     

我国地质岩心钻探设备发展历程及方向

通过回顾我国地质岩心钻探设备发展历程，分析岩心钻探设备的现状，优势和不足，提出了对其今后发展的几点看法。     

岩土工程实现规模经营,扩大工程市场服务功能,争取更大的经济效益

地矿部吉林地勘避自八十年代初开始推向地质市场，迄今已十多年，服务领域日益扩大，但根据当前市场发展的趋向，必须走视规模经营的路子，引进，更新技术装备，扩大工程市场的服务功能和占有率，才能获得更大的经济效益。