Estimation of groundwater recharge using the soil moisture budget method and the base-flow model

A detailed characterization of the site is crucial to designing an efficient method of managing the risks associated with tailings from abandoned mines. Therefore, samples collected from various depths within tailings in Guryong mine, Korea, were analyzed for their chemical, physical and mineralogical characteristics. All samples of the Guryong tailings had acid-generating potential. However, in the oxidation zone, the net acid generation (NAG) was low (30 kg H₂SO₄ t⁻¹) although the acid neutralization potential (ANP) was less than zero. The ANP values in the unoxidation zone were higher (> −56.0 kg CaCO₃ t⁻¹) than in the other zones. As a result, the amount of alkali ions that are needed to neutralize the acid needs to be considered. In this experiment G3, G4 and G6 drill cores containing fine tailings particles near the unoxidation zone were observed to contain calcite (CaCO₃) with acid-neutralizing capacity. A low pH (2−4) in the oxidation zone of the tailings changed to a neutral pH in the unoxidation zone of the tailings. These results suggest that the acid-neutralizing capacity of the tailings was controlled by particle and mineral composition of tailings.     

Applications of particle-tracking techniques to bank infiltration: a case study from El Paso,Texas, USA

This paper presents results of a small scale study that utilized particle-tracking techniques to evaluate transport of river water through an alluvial aquifer in a bank infiltration testing site in El Paso, Texas, USA. The particle-tracking survey was used to better define filtration parameters. Several simulations were generated to allow visualization of the effects of well placement and pumping rate on flow paths, travel time, the size of the pumping influence zone, and proportion of river-derived water and groundwater mixing in the pumping well. Simulations indicate that migration of river water into the aquifer is generally slow. Most water does not arrive at the well by the end of an 18-day pumping period at 0.54 m³/min pumping rate for a well located 18 m from the river. Forty-four percent of the water pumped from the well was river water. The models provided important information needed to design appropriate sampling schedules for bank filtration practices and ensured meeting adequate soil-retention times. The pumping rate has more effect on river water travel time than the location of the pumping well from the river. The examples presented in this paper indicate that operating the pumping well at a doubled distance from the river increased the time required for the water to travel to the well, but did not greatly change the capture zone.     

固定式海洋平台利用TLD的减震研究

本文研究固定式海洋平台利用调谐液体阻尼器（ＴｕｎｅｄＬｉｑｕｉｄＤａｍｐｅｒ，简称ＴＬＤ）减小地震反应的方法。首先探讨了调谐频率比、激磁频率比对减震效果的影响，在此基础上建立了ＴＬＤ——平台系统的力学模型和运动方程，通过数值计算验证了该方法的有效性     

Long-Term Effect of TMD on Vibration Control of An MDOF Offshore Fixed Platform

A three-dimensional fixed offshore platform in deep water modeled by the finite element method is studied in this paper. Analysis of the dynamic response of the MDOF structure is realized taking the non-linearity of the wave drag force and the wave-structure interaction into account. The structural response statistics, which have Gaussian distributions, are used to evaluate the vibration effect of the structure without TMD and with TMD. And an optimal method to design TMD controlling the first mode of the multi-mode structure is proposed. Moreover, the probabilities of occurrence of sea states at the platform site are considered for prediction of the long-term effect of a TMD. Simulation results demonstrate that the long-term effect of a well-designed TMD is good and the practical use is possible due to the good stability of its optimal parameters under different sea states.     

Seismic Response Control of Offshore Platform Structures with Shape Memory Alloy Dampers

In this study, the seismic response control of offshore platform structures with Shape Memory Alloy (SMA) dampers is investigated. A new SMA damper and its restoring force medel are introduced for the calculation of seismic response reduction. Based on an actual platform structure and its mechanical medel, the parameters which may affect the rate of shock absorption are analyzed, such as the number, position and characteristics of the SMA dampers and the condition of the site where the platform is located. The results show that the SMA damper is an effective control device for offshore platforms and satisfactory control can be achieved by proper selection of the parameters.     

长期非平稳荷载调谐质量减振阻尼器优化设计

研究外荷载为长期非平稳随机过程。考虑长期荷载的特性 ,采用 1个概率谱密度函数来反映长期非平稳随机荷载及其特征 ;概率谱密度函数是基于大量的一般谱密度函数的统计特性获得。以延长结构的抗疲劳使用寿命为目标函数 ,提出了调谐质量减振阻尼器的优化设计方法 ,这在实际工程中有着极为广阔的应用前景。本文旨在从理论上发展长期非平稳随机荷载作用下调谐质量减振阻尼器的优化设计方法 ;文中采用长期波浪实测数据 ,给出了 1个数值算例说明整个设计过程。     

Deep ocean fluxes and their link to surface ocean processes and the biological pump

Intense studies of upper and deep ocean processes were carried out in the Northwestern Indian Ocean (Arabian Sea) within the framework of JGOFS and related projects in order to improve our understanding of the marine carbon cycle and the ocean’s role as a reservoir for atmospheric CO₂. The results show a pronounced monsoon-driven seasonality with enhanced organic carbon fluxes into the deep-sea during the SW Monsoon and during the early and late NE Monsoon north of 10°N. The productivity is mainly regulated by inputs of nutrients from subsurface waters into the euphotic zone via upwelling and mixed layer-deepening. Deep mixing introduces light limitation by carrying photoautotrophic organisms below the euphotic zone during the peak of the NE Monsoon. Nevertheless, deep mixing and strong upwelling during the SW Monsoon provide an ecological advantage for diatoms over other photoautotrophic organisms by increasing the silica concentrations in the euphotic zone. When silica concentrations fall below 2 μmol l⁻¹, diatoms lose their dominance in the plankton community. During diatom-dominated blooms, the biological pathway of uptake of CO₂ (the biological pump) appears to be more efficient than during blooms of other organisms, as indicated by organic carbon to carbonate carbon (rain) ratios. Due to the seasonal alternation of diatom and non-diatom dominated exports, spatial variations of the annual mean rain ratios are hardly discernible along the main JGOFS transect.Data-based estimates of the annual mean impact of the biological pump on the fCO₂ in the surface water suggest that the biological pump reduces the increase of fCO₂ in the surface water caused by intrusion of CO₂-enriched subsurface water by 50–70%. The remaining 30 to 50% are attributed to CO₂ emissions into the atmosphere. Rain ratios up to 60% higher in river-influenced areas off Pakistan and in the Bay of Bengal than in the open Arabian Sea imply that riverine silica inputs can further enhance the impact of the biological pump on the fCO₂ in the surface water by supporting diatom blooms. Consequently, it is assumed that reduced river discharges caused by the damming of major rivers increase CO₂ emission by lowering silica inputs to the Arabian Sea; this mechanism probably operates in other regions of the world ocean also.     

Th sorption and export models in the water column: A review

Over the past few decades, the radioisotope pair of ²³⁸U / ²³⁴Th has been widely and increasingly used to describe particle dynamics and particle export fluxes in a variety of aquatic systems. The present paper is one of five review articles dedicated to ²³⁴Th. It is focused on the models associated with ²³⁴Th whereas the companion papers (same issue) are focused on present and future methodologies and techniques (Rutgers van der Loeff et al.), C / ²³⁴Th ratios (Buesseler et al.), ²³⁴Th speciation (Santschi et al.) and present and future applications of ²³⁴Th [Waples, J.T., Benitez-Nelson, C.R., Savoye, N., Rutgers van der Loeff, M., Baskaran, M., Gustafsson, Ö., this issue. An Introduction to the application and future use of ²³⁴Th in aquatic systems. Marine Chemistry, FATE special issue]. In this paper, we review current ²³⁴Th scavenging models and discuss the relative importance of the non-steady state and physical terms associated with the most commonly used model to estimate ²³⁴Th flux. Based on this discussion we recommend that for future work the use of models should be accompanied by a discussion of the effect that model and data uncertainty have on the model results. We also suggest that future field work incorporate repeat occupations of sample sites on time scales of 1–4 weeks in order to evaluate steady state versus non-steady state estimates of ²³⁴Th export, especially during high flux events (> ca. 800 dpm m^− 2 d^− 1). Finally, knowledge of the physical oceanography of the study area is essential, particularly in ocean margins and in areas of established upwelling (e.g., Equatorial Pacific). These suggestions will greatly enhance the application of ²³⁴Th as a tracer of particle dynamics and flux in more complicated regimes.     

Changing grading of soil: effect on critical states

Examples of situations are presented where the grading of a soil changes during its lifetime either by crushing of particles leading to an increase of fine material or by slow transport of fine particles with seepage leading to a decrease of fine material. Such grading changes influence the basic constitutive properties of the soil, in particular properties such as critical states which are dependent on the available range of densities of packing. Discrete element modelling is used to show the dependence of critical state conditions on grading and the way in which the particle assembly seeks out new critical state conditions as the grading changes.     

Particle size dependent response of aerosol counters

During an international workshop at the Institute for Experimental Physics of the University of Vienna, Austria, which was coordinated within the Committee on Nucleation and Atmospheric Aerosols (IAMAS-IUGG), 10 instruments for aerosol number concentration measurement were studied, covering a wide range of methods based on various different measuring principles. In order to investigate the detection limits of the instruments considered with respect to particle size, simultaneous number concentration measurements were performed for monodispersed aerosols with particle sizes ranging from 1.5 to 50 nm diameter and various compositions.The instruments considered show quite different response characteristics, apparently related to the different vapors used in the various counters to enlarge the particles to an optically detectable size. A strong dependence of the 50% cutoff diameter on the particle composition in correlation with the type of vapor used in the specific instrument was found. An enhanced detection efficiency for ultrafine hygroscopic sodium chloride aerosols was observed with water operated systems, an analogous trend was found for n-butanol operated systems with nonhygroscopic silver and tungsten oxide particles.