Microbial release of potassium from K-bearing minerals by thermophilic fungus Aspergillus fumigatus

A strain of thermophilic fungus Aspergillus fumigatus was cultured with K-bearing minerals to determine if microbe-mineral interactions enhance the release of mineralic potassium. Experiments were carried out in two settings, one with the mineral grains and the fungal cells in direct contact, and the other employing a membrane (pore size 0.22 μm) to separate the two. Measurements over a period of 30 days showed that, irrespective of the experimental setup, the concentration of free K in the culture was drastically higher than those in any of the control experiments where no living organism was present. Moreover, the occurrence of mineral-cell physical contact enhanced potassium release by an additional factor of 3 to 4 in comparison to the separation experiments. For contact experiments, Electron Probe Microanalysis revealed the formation of mycelium-mineral aggregates, and Atomic Force Microscopy imaging further indicated the possible ingestion of mineral particles by the fungus cells. Contrasting to what was observed and expected in control experiments, the potassium solubilization rate showed a positive dependence upon pH when fungi and minerals were mixed directly, and exhibited no correlations with solution acidity if cell-rock contact was restrained. These results appear to suggest that A. fumigatus promoted potassium release by means of at least three likely routes, one through the complexation of soluble organic ligands, another appealing to the immobile biopolymers such as the insoluble components of secretion, and the third related to the mechanical forces in association with the direct physical contact between cells and mineral particles.     

Temperature–composition–time (T–X–t) data from authigenic K-feldspar: An integrated methodology for dating fluid flow events

Integration of fluid inclusion analysis with high spatial resolution Ar–Ar dating of K-feldspar cements has been used to resolve and reconstruct palaeo-fluid flow. Fluid inclusion analysis allows discrimination of distinct cement phases, thereby identifying discrete episodes of fluid flow. Ar–Ar dating of the same cements via high spatial resolution laserprobe establishes absolute age constraints on the framework previously constructed. Integration of these two datasets yields temperature–composition–time data.     

TEM study of a special grain boundary in a synthetic K-feldspar bicrystal: Manebach Twin

 A monoclinic KAlSi₃O₈ feldspar Manebach twin boundary was synthesized by diffusion bonding and examined using high-resolution transmission electron microscopy. The sharp (001) twin boundary is straight and free of strain. The boundary width is smaller than d₀₀₁. There is no rigid body shift observed at the twin boundary, and the feldspar structure is arranged symmetrically across (001). The twin boundary structure consists of bridged tetrahedral crankshafts, which are characteristic of the feldspar lattice. The grain boundary structure is in good agreement with the geometrical model of Taylor et al. (1934). The grain boundary composition of K_1/2H_1/2AlSi₃O₈ differs from their model. Received: 13 February 2002 / Accepted: 24 December 2002 Acknowledgements We thank M. Rühle, S. Hutt, J. Mayer, A. Strecker and U. Salzberger at MPI, Stuttgart, for their support and valuable advice in preparing TEM sections of bicrystals.     

河南嵩县店房金矿区花岗斑岩锆石U-Pb年龄、Hf同位素及岩石地球化学

华北陆块南缘外方山店房金矿区内出露后沟、水漉塘和店房钾长花岗斑岩体(脉),其与隐爆角砾岩筒及金矿化有密切的空间关系。为查明钾长花岗斑岩体的侵位时代、岩石成因和源区性质,本次开展了锆石U-Pb定年、锆石Hf同位素及岩石地球化学分析等研究。结果表明岩体具有高硅、高钾、富铝、低镁的特征,属钾玄岩系列Ⅰ型花岗岩,轻重稀土元素分馏明显,具有弱的Eu负异常,岩石富集Rb、K、Ba等,亏损Nb、Ta、Sr、P、Ti等元素。锆石具有核—边结构,其中锆石边SHRIMP U-Pb年龄142.6±2.1Ma(MSWD=1.4),_(εHf)(t)=-23.0~-13.8,两阶段模式年龄主要集中于2075~2652 Ma;锆石核LA-ICPMS U-Pb年龄可分为两组,即2169~2336Ma和1732~1881Ma,Hf同位素组成可分为两组,_(εHf)(t)分别集中于-13.1~-4.8和-4.5~3.7,模式年龄主要集中于2376~2805Ma。表明钾长花岗斑岩体形成于142.6±2.1Ma的早白垩世早期,岩浆可能由2169~2336Ma的古老下地壳新太古代太华群部分熔融而成,并有地幔组分参与,岩浆在上升或定位过程中捕获了1732~1881Ma熊耳群火山岩的锆石。结合区域构造背景认为,该岩体是早白垩世古太平洋板块向欧亚大陆俯冲致使华北陆块岩石圈减薄伸展而引起的岩浆活动的产物。     

Advances and Issues in Luminescence Dating of Loess Deposits in Arid Central Asia

High-resolution loess deposits are widely distributed in Arid Central Asia (ACA) and provide important records associated with dust transportation, paleoenvironmental and paleoclimatic evolution. The chronology is the foundation of the research into loess deposits as an environmental archive. In recent decades, the gradually developed optical dating method has been increasingly matured and become an important approach to establishing the loess-paleosol sequences. Here, we summarized and discussed previous work on loess chronology mainly based on optical dating approach in ACA. The following understandings have been listed: ① In comparison with optical dating method, the suitable material for ¹⁴C dating is uncommon in ACA. However, the dating range of luminescence dating is more extensive, and the dating materials are accessible. Thus, the optical dating is widely applicable in the establishment of loess framework in this area. ② Until now, the quartz Single Aliquot Regeneration (SAR) method can be applied to the establishment of loess-paleosol sequence since last glacial period. But several issues remain unaddressed. For example, the Optically Stimulated Luminescence (OSL) signal sensitivity of quartz grains are low in some areas. Furthermore, the results of OSL dating of different grain sizes within a single sample are inconsistent in some areas. The solution of these problems still requires more methodological research. ③ The post-IR IRSL (pIRIR) and multiple elevated temperature stimulation (MET-pIRIR) protoCols of feldspar have basically overcome the anomalous fading issue in the traditional IRSL dating process. In ACA, the framework since MIS 7 can be established with K-feldspar luminescence dating method. Compared with quartz luminescence characteristics, the K-feldspar luminescence signals are more sensitive and exhibit a high saturation level. In specific applications, it is necessary to establish the age frame according to the luminescence sensitivity, the age of samples or other factors.     

应用最小二乘法建立钾长石释光测年标准生长曲线

标准生长曲线（Standardised Growth Curve,SGC）法的提出为高效快速地测定释光样品的等效剂量（D_e）值提供了可能。不同实验室的放射源剂量率、操作流程、仪器误差等的不同会导致SGC参数的不同。运用最小二乘法标准化实验剂量校正后的信号L_ri/T_ri*D_e得到一条本实验室的标准生长曲线,用来快速得到等效剂量值。通过R软件实现了最小二乘法标准化过程,建立了50、100、150、200、250℃激发温度下的钾长石的标准生长曲线,分析发现250℃下的SGC收敛性最好,由于此温度下的信号衰退率可忽略不计,因此,我们用250℃激发温度下的SGC方程来估计样品的等效剂量。比较250℃ SGC D_e和250℃ MET-pIRIR D_e的一致性,发现在0~500 Gy范围内用SGC法估计的D_e和MET-pIRIR法估计的D_e非常接近,表明了此范围内SGC法的可靠性,而在>600 Gy范围内出现较大差别。一方面,此范围内用于拟合SGC的数据点较少导致高剂量区域内拟合的方程参数不够准确;另一方面,600 Gy与SGC对应的饱和剂量水平值844.5 Gy已经接近,所以在>600 Gy区域测出的D_e很可能出现较大偏差。因此需在今后工作中逐步积累更多样品,完善SGC参数,使其也能胜任较老年龄样品。     

添加剂对KAlSi_3O_8-CaSO_4-CaCO_3体系反应表观活化能的影响

首先测定了KAlSi3O8-CaSO4-CaCO3体系在不同焙烧条件下钾长石转化成可溶性氧化钾的转化率,进而通过模拟计算表明:KAlSi3O8-CaSO4-CaCO3体系的固相扩散动力学过程符合金斯特林格动力学方程,反应表观活化能Ea为128.92kJ/mol。并着重考察了4种添加剂Na2SO4、Na2SO3、NaCl和NaF对KAlSi3O8-CaSO4-CaCO3体系的影响,结果表明:向体系中分别加入占反应物总质量3%的Na2SO4、Na2SO3、NaCl和1%的NaF后,体系的反应表观活化能Ea从原来的128.92kJ/mol依次下降至87.15、98.71、117.38和126.14kJ/mol,这表明4种添加剂中Na2SO4的效果最好,它能较大程度上降低反应表观活化能,从而降低反应温度和提高固相反应速率。     

辽北地区钾长石矿地质特征及开发应用方向

以铁岭县湾龙背地区的钾长石矿为例,研究了辽北地区伟晶岩型钾长石矿的分异相带特点及空间分布规律。指出具新太古代壳源岩浆成因的钾长石分异相带明显,可分为内中外三个相带,其中内部相带的块体状钾长石、中间相带的团块状具文象结构的钾长石质量好,并在对国内的钾长石的市场潜力分析的基础上,指明了辽北地区钾长石矿的开发利用方向。     

P–T–t evidence for mechanisms of vertical tectonic motion in a contractional orogen: north-western US and Canadian Cordillera

The >1800 km long Coast Mountains–North Cascades orogen of the Canadian Cordillera and north-western US developed as a continental magmatic arc. Metamorphic rocks in the orogen contain widespread evidence for burial of supracrustal rocks to depths of c. 40 km, followed by nearly isothermal decompression to depths of <10 km. Near many shallowly-emplaced, mid-Cretaceous plutons, low-pressure contact metamorphic effects were overprinted by high-pressure regional metamorphic minerals and textures, as evidenced by kyanite±staurolite pseudomorphs after andalusite in metapelitic rocks. Therefore, near-pluton rocks record the loading history of the orogen. Metapelitic rocks not associated with plutons only preserve evidence for high-pressure conditions and/or high-temperature decompression, as indicated, for example, by sillimanite and cordierite after kyanite and garnet, respectively. Petrological evidence for burial and decompression is therefore recorded in different rocks. Various regions of the orogen differ in timing of metamorphism, the overall shape of P–T paths and the relative timing and regional extent of the high-pressure event, but most of these data and observations are consistent with thrusting and/or pure shear thickening as primary loading mechanisms throughout the orogen, as opposed to magma-dominated loading. This interpretation is further supported by comparison with thermal models, which demonstrate that the P–T paths are consistent with simultaneous thrusting and folding at a high initial geothermal gradient (35–40 °C km^?1) in much of the orogen. A high geothermal gradient supports tectonic models invoking intra-arc contraction and suggests that magmatism played an important role in regional temperature-time paths. This tectonic-thermal history may be typical of other contractional orogens and illustrates the importance of large vertical displacement of crust in magmatic arcs.     

Application of K-feldspar–jadeite–quartz barometry to eclogite facies metagranites and metapelites in the Sesia Lanzo Zone (Western Alps, Italy)*

The eclogite facies assemblage K-feldspar–jadeite–quartz in metagranites and metapelites from the Sesia-Lanzo Zone (Western Alps, Italy) records the equilibration pressure by dilution of the reaction jadeite+quartz=albite. The metapelites show partial transformation from a pre-Alpine assemblage of garnet (Alm₆₃Prp₂₆Grs₁₀)–K-feldspar–plagioclase–biotite±sillimanite to the Eo-Alpine high-pressure assemblage garnet (Alm₅₀Prp₁₄Grs₃₅)–jadeite (Jd_80–97Di_0–4Hd_0–8Acm_0–7)–zoisite–phengite. Plagioclase is replaced by jadeite–zoisite–kyanite–K-feldspar–quartz, and biotite is replaced by garnet–phengite or omphacite–kyanite–phengite. Equilibrium was attained only in local domains in the metapelites and therefore the K-feldspar–jadeite–quartz (KJQ) barometer was applied only to the plagioclase pseudomorphs and K-feldspar domains. The albite content of K-feldspar ranges from 4 to 11 mol% in less equilibrated assemblages from Val Savenca and from 4 to 7 mol% in the partially equilibrated samples from Monte Mucrone and the equilibrated samples from Montestrutto and Tavagnasco. Thermodynamic calculations on the stability of the assemblage K-feldspar–jadeite–quartz using available mixing data for K-feldspar and pyroxene indicate pressures of 15–21 kbar (±1.6–1.9 kbar) at 550±50 °C. This barometer yields direct pressure estimates in high-pressure rocks where pressures are seldom otherwise fixed, although it is sensitive to analytical precision and the choice of thermodynamic mixing model for K-feldspar. Moreover, the KJQ barometer is independent of the ratio PH2O/P_T. The inferred limiting a(H₂O) for the assemblage jadeite–kyanite in the metapelites from Val Savenca is low and varies from 0.2 to 0.6.