Three-dimensional finite element simulation of fracture propagation in rock specimens with pre-existing fissure(s) under compression and their strength analysis

A FORTRAN program, consistent with the commercially available finite element (FE) code ABAQUS, is developed based on a three-dimensional (3D) linear elastic brittle damage constitutive model with two damage criteria. To consider the heterogeneity of rock, the developed FORTRAN program is used to set the stiffness and strength properties of each element of the FE model following a Weibull distribution function. The reliability of the program is assessed against available experimental results for granite cylindrical specimens with a throughgoing, flat and inclined fissure. The calibration procedure of the material parameters is explained in detail, and it is shown that the compressive to tensile strength ratio can have a substantial influence on the failure response of the specimens. Numerical simulations are conducted for models with different levels of heterogeneity. The results show a smaller load bearing capacity for models with less homogeneity, representing gradual coalescence of fully damaged elements forming throughout the models during loading. The maximum load bearing capacity is studied for various combinations of inclination angles of two centrally aligned, throughgoing and flat fissures of equal length embedded in cylindrical models under uniaxial and multiaxial loading conditions. The key role of the compressive to tensile strength ratio is highlighted by repeating certain simulations with a lower compressive to tensile strength ratio. It is proven that the peak loads of the rock models with sufficiently small compressive to tensile strength ratios containing two throughgoing fissures of equal length are similar, provided that the minimum inclination angles of the models are the same. The results are presented and discussed with respect to the existing experimental findings in the literature, suggesting that the numerical model applied in this study can provide useful insight into the failure behaviour of rock-like materials.     

Implementation of a coupled plastic damage distinct lattice spring model for dynamic crack propagation in geomaterials

This paper studies dynamic crack propagation by employing the distinct lattice spring model (DLSM) and 3‐dimensional (3D) printing technique. A damage‐plasticity model was developed and implemented in a 2D DLSM. Applicability of the damage‐plasticity DLSM was verified against analytical elastic solutions and experimental results for crack propagation. As a physical analogy, dynamic fracturing tests were conducted on 3D printed specimens using the split Hopkinson pressure bar. The dynamic stress intensity factors were recorded, and crack paths were captured by a high‐speed camera. A parametric study was conducted to find the influences of the parameters on cracking behaviors, including initial and peak fracture toughness, crack speed, and crack patterns. Finally, selection of parameters for the damage‐plasticity model was determined through the comparison of numerical predictions and the experimentally observed cracking features.     

RECENT TECTONIC DEFORMATION ANOMALY AND EARTHQUAKES IN GANSU-NINGXIA-QINGHAI AREA

1　IntroductionAccordingtogeologicalstructure ,theGansu Ningxia Qinghaiareabelongstothenortheastmar ginofQinghai Tibetblock .Thisareahasbeenpaidmuchattentionby geo specialistsinChinaandabroadbecauseofitssignificanttectonicmovement,itsintensiveseismicity ,anditsimportanceinearth quakehazardmitigation .IntheDevelopmentPro gramonNationalKeyBasicResearchesundertheProject“MechanismandPredictionofContinentalStrongEarthquakes”,themechanismsofcontinen talstrongearthquakesarestudied ,usinghypo…     

FEASIBLE STUDY ON THE INTEGRATION SYSTEM FOR THE SPACE MONITORING OF MAJOR EARTHQUAKES AND VOLCANOES IN TERRESTRIAL LAND

With the rapid development of space technology, earth observation technology and sky observatory technolo-gy, they have played a more and more important part in monitoring and predicting of earthquakes and volcanoes in the terres-trial land. In recent years, the related agencies have done the experiments and researches on monitoring and predicting ofearthquakes and volcanoes in the forewarning period by means of many approaches, such as satellite thermal infrared re-mote sensing (TIRS), Global Positioning System (GPS), differential interferometric synthesis aperture radar (D-INSAR),astronomical time-latitude residual anomaly, and Geographic Information Systems (GIS), etc. A quite large number of re-search foundation has been built in the fundamental theories and application methods. The experiments and researcheshave shown that these technology is efficient methods for high frequency crust movement. If the existed separate scientificforces and results are possibly assembled together to form a more complete integration monitoring system with the combina-tion of space, sky observation, ground, deep geology and macro anomaly, it will come into a new stage of monitoring andpredicting of earthquakes and volcanic eruptions.     

大同—阳高Ms6.1地震前兆综合加权信息熵的变化

利用“地震预报计算机专家系统”的思想对大同 -阳高 Ms6 .1地震前每一前兆异常事件进行综合评估 ,以每一异常的最可能发震时间来计算发震概率 ,利用地震前兆综合加权信息熵研究了系统熵值与地震的关系。对华北地区的地震前兆综合加权信息熵研究表明 ,在大同 -阳高 Ms6 .1地震前 ,信息熵出现了明显的减熵有序变化     

Bacterial productivity in the Prydz Bay and its adjacent waters,Antarctic

1　IntroductionBacteriaandtheiractivitiesplayanimportantroleintheelementalbiogeochemicalcyclesandenergytransformingintheocean (Zhenetal.1 997) .DortchandPackard(1 989) proposedthatfoodwebsintheeutrophicwatersaredominatedbythebiomassofprimaryproducerswhilefoodwebsintheoligotrophicwatersaredominatedbythebiomassofmicrobes.Heterotrophicbacteriahadbeenshowntoplayanimportantroleinthedecompositionoflarge ,rapidlysinkingorganicparticleswithinandbelowtheeuphot iczone ,andfurthertoaffecttheelementaldyn…     

地壳对海洋潮汐的响应

应用三维动态有限元方法研究了中国北部地区的地壳对邻近的渤海与黄海海平面变化的响应。虽然此应力场过于微弱不足以引发地震，但发现应力集中的位置及应力场变化较大的位置恰好与某些现代地震的震中一致。这一结果表明研究地壳对广泛分布的载荷的响应对研究区域地震构造是有帮助的。     

昆仑山8.1级地震前中国大陆的构造应变背景

利用“网络工程”1998～2001年累积的1181个测站的GPS重复观测资料，采用双三次样条函数模型建立中国大陆水平运动模型速度场，用大地坐标在椭球面上计算各类应变场，详细分析了2001年昆仑山8．1级地震前中国大陆水平构造应变场空间分布特征。各类构造应变场的最高值都出现在喜马拉雅构造带与昆仑山地块内(地震断裂带南侧)，鲜水河—安宁河断裂带次之。分析表明，昆仑山8．1级地震正好发生在张性面膨胀应变率的高值区，第一、第二和最大剪应变率高值区边缘的突变区和最大、最小主应变率的高值区。     

地震前后垂直形变场动态演化的量化指标

提出一种表达垂直形变场动态演化过程的量化指标——区域应变率、应变集中度。在此基础上，对南北地震带各水准监测区近30年的垂直形变资料进行了实际计算．并结合具体震例进行了对比研究。结果表明：量化指标在一定程度上能够反映地震前后形变场的动态演化过程和地壳运动状态，对地震的中长期预报有一定的积极意义。