Vertical distribution of the macrobenthic community and its relationships to trace metals and natural sediment characteristics in the lower Douro estuary, Portugal

Vertical distribution (0–15 cm) of the macrobenthic community and its relationships to natural sediment characteristics and trace metal contents and bioavailability were studied at five locations in the lower Douro estuary, Portugal. An analysis of vertical metal distribution, for the interpretation of anthropogenic impact on the estuarine sediments, was also investigated. Sediment characterisation included organic matter, grain size, metals (Al, Fe, Cu, Pb, Cr, Ni, Cd, Zn and Mn), acid volatile sulphide (AVS) and simultaneously extracted metals (SEM). The macrobenthic community had low diversity (14 species), was dominated by small size opportunists and seemed to be controlled mainly by natural factors such as grain size distribution, Al and Fe contents and sediment depth. The vertically heterogeneous distribution of macrobenthic community appears to affect redox status of the sediments and consequently metal bioavailability. Despite anthropogenic contamination in terms of Zn, Cu, Pb, Cr and Ni having already been detected in the north bank, the analysis of vertical distribution was essential for the identification of current anthropogenic contamination in terms of Zn, Pb and Cd in the south bank.     

Heavy metals in some New Zealand commercial sea fishes

To establish a base line against which future pollution may be measured, eight common commercial species of New Zealand sea fish were analysed for cadmium, chromium, copper, iron, lead, manganese, nickel, and zinc. One sample of edible muscle tissue was analysed for each of 70 samples of each species. The internal organs of up to five specimens of each species were also analysed. The fish studied were: kahawai, Arripis trutta, trevally, Caranx lutescens, tarakihi, Cheilodactylis macropterus, snapper, Chrysophrys auratus, moki, Latridopsis ciliaris, hapuku, Polyprion oxygeneios, kingfish, Seriola grandis and gurnard, Trigla kumu.

Although, none of the edible parts of the fish appeared to have trace element levels likely to be a public health problem (cadmium 0.002–0.02 ppm, chromium 0.01–0.04 ppm, copper 0.04–0.95 ppm, iron 0.9–13.5 ppm, lead ‘ 0.14–0.95 ppm, manganese 0.04–2.00 ppm, nickel 0.01–0.08 ppm, zinc 2.0–36.0 ppm), some of the organs (particularly the liver) had relatively high concentrations of elements such as cadmium (up to 54 ppm). Only if some industry were to seek to exploit internal organs of fish for human consumption would such levels become important. There was some evidence for a relationship between trace element concentrations and fish size for copper in kingfish and snapper, iron in hapuku, manganese in gurnard, and for zinc in kingfish and tarakihi. Some element pairs such as copper and zinc, iron and manganese, appeared to have concentrations which were mutually related. It was assumed that the elemental concentrations reported represent natural levels and are not the result of significant man‐made pollution because there are no major industries or large urban centres adjacent to the fishing grounds.     

The effect of the wave-induced mixing on the upper ocean temperature in a climate model

The significant underestimation of sea surface temperature （SST） and the temperature in the upper ocean is one of common problems in present climate models. The influence of the wave-induced mixing on SST and the temperature in the upper ocean was examined based on a global climate model. The results from the model coupled with wave-induced mixing showed a significant improvement in the simulation of SST and the temperature in the upper ocean compared with those of the original model without wave effects. Although there has still a cold bias, the new simulation is much closer to the climatology, especially in the northern ocean and tropical ocean. This study indicates that some important physical processes in the accurate simulation of the ocean may be ignored in present climate models, and the wave-induced mixing is one of those factors. Thus, the wave-induced mixing （ or the effect of surface waves） should be incorporated properly into climate models in order to simulate or forecast the ocean, then climate system, more accurately.     

大西洋上四个爆发性气旋的云微物理参量垂直分布特征分析

利用CloudSat卫星数据处理中心(CloudSat Data Processing Center,CloudSat DPC)提供的CloudSat卫星数据、欧洲中期天气预报中心(European Centre for Medium-Range Weather Forecasts,ECMWF)提供的ERA5再分析资料和美国国家航空航天局(National Aeronautics and Space Administration,NASA)提供的Aqua卫星可见光云图,对冬春季发生在大西洋上四个爆发性气旋个例的云微物理参量垂直分布特征进行了分析。结果表明:爆发性气旋中心云系多为层积云或积云,中心外围云系以雨层云为主,雨层云外部往往伴随着相似高度的高层云,气旋冷锋云带内以雨层云、高层云和高积云为主,冰粒子出现的最低高度与0℃等温线高度几乎重合;冰粒子有效半径随高度的增加而减小,而冰粒子数浓度随高度增加而增大;冰水含量大值区主要位于雨层云中部;液态水主要分布在高层云和层积云底部,冬季爆发性气旋个例内的液态水含量大于春季。     

前板可旋转的双垂板结构水动力特性的理论研究

振荡水柱波能转换装置的最大转换效率往往受到腔内水柱共振机制的直接影响。通过对装置的基本结构进行简化,提出了一种前墙可绕固定轴旋转的双垂板式结构系统,旨在通过前墙的旋转运动进一步加剧水柱的振荡,从而对腔内水柱的共振机制进行调节和控制。基于线性波理论,采用匹配特征函数展开法对波浪与双垂板结构的相互作用进行理论研究,针对流场在结构物尖角附近的奇异性特征,将公共界面上的速度分布基于切比雪夫多项式近似展开,并应用区域间的速度与压力连续条件进行求解。通过分析结构的几何参数对反射透射系数、平均波面高程、前墙旋转振幅以及前墙与水面间相位差的影响,深究其共振机理,为振荡水柱波能转换装置的效率优化机制提供理论依据。结果表明,在所研究的波浪频率范围内,前墙的自由旋转运动会加剧板间的平均波面高程,应用于波浪能转换装置中能进一步拓宽高效频率带宽。     

跨海高程传递方法的评价

针对跨海高程传递的最新进展,介绍了几种高程传递的实用方法,对优缺点和适用范围进行了分析与评价。初步试验结果分析表明,对于10km内的高程传递,几种方法均满足三等水准的精度要求,对于更远距离的跨海高程传递还需进一步研究。     

Analytical Study on Wave Diffraction from a Vertical Circular Cylinder in Front of Orthogonal Vertical Walls

In this paper, the principle of mirror image is used to transform the problem of wave diffraction from a circular cylinder in front of orthogonal vertical walls into the problem of diffraction of four symmetric incident waves from four symmetrically arranged circular cylinders, and then the eigenfunction expansion of velocity potential and Grafs addition theorem are used to give the analytical solution to the wave diffraction problem. The relation of the total wave force on cylinder to the distance between the cylinder and orthogonal vertical walls and the incidence angle of wave is also studied by numerical computation.     

Waveform Shaping of Sonar Transducers for Improving the Vertical Resolution in Sub-bottom Sediments Profiling

Vertical resolution is of fundamental importance in sonar exploration and is directly related to the duration of the acoustic pulse generated by the transducer. The shorter the radiated pulse, the higher the vertical resolution. Many sub-bottom profiling sonar systems use piezoelectric transducers because they are reversible and well understood. Piezoelectric projectors are normally resonant transducers, which are intrinsically narrowband. A piezoelectric transducer is usually driven by a tone-burst. However, it is possible to use Fourier techniques to find a pre-compensated electrical driving function so that the transducer radiates a prescribed wider band acoustic waveform. This technique can be applied to synthesize zero-phase cosine-magnitude, Gaussian, and bionic pulses, with a conventional sandwich transducer. Zero-phase cosine-magnitude waveforms provide minimum length pulses (and therefore maximum resolution) within a prescribed frequency band.The aim of this paper is to illustrate the synthesis of wideband acoustic pulses using an underwater piezoelectric projector. The conventional acoustic waveform radiated when a Tonpiltz transducer is transiently excited using a “click” and allows its frequency response function to be measured. This function is used to design the electrical signal which then drives the transducer so that it radiates the shortest pulse compatible with its mechanical response. The significant resolution enhancement of the waveform shaping process is illustrated by its application to a sediment wedge model.     

多类资料计算南海重力垂直梯度的方法比较

重力垂直梯度在解决和解释地球表层地质和地球物理问题中的作用日益明显,因而获得其模型和分布是非常必要的。利用测高卫星可以得到空间大范围高精度、高分辨率的垂线偏差、重力异常以及大地水准面数据,利用测高重力资料和地球重力场模型,采用不同方法分别计算了南海海域重力垂直梯度,并对它们进行了比较。     

Testing taxonomic resolution,data transformation and selection of species for monitoring macroalgae communities

The Water Framework and Habitats Directives require the evaluation of both the conservation and ecological status of macroalgae communities at water body or habitat level. However, assessments of macroalgal communities are highly time-consuming, both in terms of sampling effort and laboratory processing. These constraints have brought about their oversight in many marine monitoring programs, especially in subtidal environments. By using data from intertidal and subtidal macroalgae assemblages of Mouro Island (North coast of Spain) we wanted to identify possible cost-effective methods for monitoring this biological indicator, based on both high taxa levels and use of representative taxa. Multivariate analyses were applied using different data transformations. The results show that macroalgal communities are robust to aggregation to genus or even family level. Moreover, the outcomes show that transformation types introduce higher variation in the multivariate pattern of samples than the taxonomic level to which organisms are identified. Also, the study supports the use of representative taxa as a surrogate to overall community structure. Therefore, we conclude that a rapid-assessment by means of field evaluations, based on coverage of representative taxa, is a reliable alternative for the assessment of macroalgae status. In addition this procedure allows evaluation at a broader spatial scale (water body or habitat level) than traditional quantitative sampling procedure does.