MAXIMUM INFORMATION ENTROPY THEORY OF EFFLUENT BAND IN OPEN CHANNEL UNIFORM FLOW

ＭＡＸＩＭＵＭＩＮＦＯＲＭＡＴＩＯＮＥＮＴＲＯＰＹＴＨＥＯＲＹＯＦＥＦＦＬＵＥＮＴＢＡＮＤＩＮＯＰＥＮＣＨＡＮＮＥＬＵＮＩＦＯＲＭＦＬＯＷＫｅＺｈｏｎｇＨＵＡＮＧ１ａｎｄＴａｏＪＩＡＮＧ２ＡＢＳＴＲＡＣＴＴｈｅｐｒｉｎｃｉｐｌｅｏｆｍａｘｉｍｕｍ...     

ON THE SELF ORGANIZED CRITICALITY OF NON UNIFORM SANDS

ＯＮＴＨＥＳＥＬＦＯＲＧＡＮＩＺＥＤＣＲＩＴＩＣＡＬＩＴＹＯＦＮＯＮＵＮＩＦＯＲＭＳＡＮＤＳＬｉｎｇｋａｎＹＡＯ２ａｎｄＤｕｏＦＡＮＧ３ＡＢＳＴＲＡＣＴＦｒｏｍｔｈｅｖｉｅｗｐｏｉｎｔｏｆｓｅｌｆｏｒｇａｎｉｚｅｄｃｒｉｔｉｃａｌｉｔｙ,ｔｈｉ...     

煤层底板破坏流固耦合数值模拟

根据煤层底板含水层具有不均一性的特点,建立了底板含水层非均布水压力学模型和流固耦合模型,并根据\     

新型压力均布型锚索锚固机理的试验研究

通过改变压力型锚索锚固段承载体结构形式和锚固段围岩强度,研究新型压力均布型锚索锚固段承载体和砂浆之间作用力传递机理,获得承载体压力分布及其大小,阐述注浆体抗剪性能的变化,从而可以确定压力均布型锚索合理的承载体结构形式。研究结果表明压力均布型锚索承载体轴力沿钢管径向均布,承载体表面肋状结构增加砂浆体的抗剪性能,大大提高压力均布型锚索的锚固能力,从而可以优化锚索锚固段的长度。     

场地地震反应分析中侧向人工边界距离选取及影响因素分析

结合均匀场地模型和分层均匀场地模型,采用数值试验的方法研究了场地地震反应分析中侧向人工边界距离的选取问题。分析了各主要因素对人工边界距离选取的影响,得到了如下结论:单侧人工边界距离与土层深度之比L/h是影响人工边界距离选取的主要参数;随着侧向人工边界距离的增加,有限元模型的计算误差并不一直减小,在局部范围内,会出现计算误差随着边界距离的增加而增大的现象;场地硬度、阻尼比和激振频率等因素不会影响计算误差随边界距离的变化规律,但采用自由场边界时受输入地震动频谱特性的影响较为明显;对水平激振下的一维场地模型来说,采用结合自由度边界时所需边界距离最短,自由场边界次之,采用粘性边界达到收敛时所需边界距离最长;无论哪种边界条件,当边界距离大于某一范围后,都能得到稳定的计算结果;相对于均质场地模型来说,实际的分层均匀场地建模时可适当减小侧向人工边界距离。     

Stresses due to vertical subsurface loading for an inhomogeneous cross‐anisotropic half‐space

In this article, we present the solutions for the stresses induced by four different loads associated with an axially loaded pile in a continuously inhomogeneous cross‐anisotropic half‐space. The planes of cross‐anisotropy are parallel to the horizontal surface of the half‐space, and the Young's and shear moduli are assumed to vary exponentially with depth. The four loading types are: an embedded point load for an end‐bearing pile, uniform skin friction, linear variation of skin friction, and non‐linear parabolic variation of skin friction for a friction pile. The solutions for the stresses due to the pile load are expressed in terms of the Hankel integral and are obtained from the point load solutions of the same inhomogeneous cross‐anisotropic half‐space which were derived recently by the authors (Int. J. Rock Mech. Min. Sci. 2003; 40 (5):667–685). A numerical procedure is proposed to carry out the integral. For the special case of homogeneous isotropic and cross‐anisotropic half‐space, the stresses predicted by the numerical procedure agree well with the solutions of Geddes and Wang (Geotechnique 1966; 16 (3):231–255; Soils Found. 2003; 43 (5):41–52). An illustrative example is also given to investigate the effect of soil inhomogeneity, the type and degree of soil anisotropy, and the four different loading types on the vertical normal stress. The presented solutions are more realistic in simulating the actual stratum of loading problem in many areas of engineering practice. Copyright © 2004 John Wiley & Sons, Ltd.     

Researches on the Internal Molecular Weight Uniformity of Chitosan Biomaterials

Uniform molecular weight(Mw)chitosan(CS)is highly demanded in medical biomaterial industry.This present article described heterogeneous degradation of CS in aqueous HCl/ethanol solution,in which progress uniform Mw CS was successfully prepared.The Mw distribution of CS was measured by gel permeation chromatography(GPC)analysis.Moreover,the structure and properties of degraded CS were characterized by Fourier transform infrared spectroscopy(FT-IR),nuclear magnetic resonance spectroscopy(^1H NMR),X-ray diffraction(XRD)and thermogravimetric(TG)analysis.In addition,the biocompatibility of degraded CS was also assessed by hemolysis rate(HR)measurement.The Mw of CS dramatically decreased from 246 KDa to 76 k Da at the initial 30 min,and stabilized at 18 kDa after 24 h.GPC analysis results showed that the degraded CS molecular become homogenization.FT-IR and 1 H NMR analysis confirmed the basic structure of CS molecular backbone was not destroyed during this progress.Besides,the water solubility of CS was not significantly influenced by this reaction.Moreover,the XRD analysis revealed that crystallinity of degraded CS increased from 70.32% to 99.25%with time.The TG analysis showed improved thermal stability of degraded CS.HR measurement demonstrated the degraded CS possessed excellent biocompatibility.This simple and efficient heterogeneous degradation would open up a new route to produce uniform Mw CS.     

推进农村地籍房屋调查的思路与方法——以福州市为例

本文以福州市为例,本着充分利用已有工作资料,减少重复建设和资金浪费的原则,同时遵循地籍调查和房屋调查的有关规范要求,重点探讨房地合一调查的关键问题,如工作底图、摸底调查、地籍房屋调查的方法、宗地分层表示的方法、房屋调查和测量的方法和精度等方面,同时对调查过程中存在的问题提出自己的建议。     

基于多项式拟合均匀荷载面曲率曲线的结构损伤识别方法

为仅利用结构损伤状态的柔度矩阵对结构进行损伤程度识别,先对损伤状态的均匀荷载面曲率曲线进行最小二乘法拟合。根据曲率曲线差判断结构的损伤位置,对损伤位置的点进行剔除后,再利用未损伤位置上的点进行局部最小二乘法拟合,代替损伤前的均匀荷载面曲率曲线,用于结构的损伤定位与定量。通过一简支梁数值算例,先以理论的二次多项式进行拟合,考虑单损伤和多损伤的情况,进行损伤识别分析,再分析多项式次数、测点数目以及不同噪声水平对损伤定量精度的影响。结果表明:在一定范围内,次数越高拟合误差越小,但差别不明显,采用理论的二次多项式拟合即可满足结构损伤识别要求,无噪声的情况下,测点数目减半不影响损伤识别的精度,该方法具有一定的抗噪声能力。     

定常风对鄱阳湖水动力的影响

鄱阳湖属大风区,风场作为仅次于流域"五河"倾泻和长江顶托作用的另一重要驱动力,或在某些时刻影响局部区域的水流结构,进而影响局部水体中泥沙、污染物、营养盐等物质的输移和扩散.基于鄱阳湖二维水动力数学模型,模拟定常风场条件下的鄱阳湖流场分布及环流形式,并与无风条件下的水流时空结构进行对比.结果表明:3.03 m/s的NE向和SSW向定常风对湖泊水位影响微弱;对流速的影响主要集中在7月中旬至9月底的"湖相"期;其影响区域主要分布在湖区中部大湖面偏西岸及东部湖湾,约占湖泊最大水面积的16%;上述区域出现明显环流,环流结构具有时空异质性特点,环流区流速普遍增至无风时的两倍以上;NE向和SSW向风场产生的环流位置相近,方向相反.相比于以往鄱阳湖水动力研究中对风场的忽略,本次研究揭示了定常风场对鄱阳湖的重点影响区域、影响程度及影响形式,可为泥沙及污染物输移模拟中对风场条件的处理及可能带来的误差与误差的空间分布提供重要依据.