Tectonically driven fluid flow and associated low-grade metamorphism during the Alpine compression in the eastern Iberian Chain (Spain)

Fluid inclusions and clay mineralogy of the Permo-Triassic rocks from the Espina and Espadà Ranges (SE Iberian Chain, Spain) have been investigated to establish their relationship with hydrothermal fluid circulation during the Alpine Orogeny. Primary fluid inclusions in quartz-filled tension gashes in Permo-Triassic sandstones reveal maximum temperatures around 230 °C and very constant salinities of 8.5% wt. eq. NaCl. Secondary fluid inclusions found in quartz from the Santonian Ba–Cu–Hg deposits show similar compositional and thermodynamic characteristics, denoting an Alpine recrystallization. Clay mineral composition of Permo-Triassic mudrocks is characterized by pyrophyillite, indicating low-grade metamorphic conditions. Field observations and experimental data suggest that the crystallization of quartz in tension gashes, the formation of secondary fluid inclusions and the development of the metamorphism are contemporaneous and related to fluid circulation during the Alpine compression. Fluid flow took place along the Hercynian fault system that was reactivated during the Mesozoic rift stage and inverted during the Alpine deformation.     

3-D BAROCLINIC NUMERICAL SIMULATION OF THE SOUTH CHINA SEA I. UPPER CIRCULATION

A three-dimensional baroclinic shelf sea model was employed to simulate the seasonal characteristics of the South China Sea (SCS) upper circulation. The results showed that: in summer, an anticyclonic eddy, after its formation between the Bashi Channel and Dongsha Islands in the northeastern SCS, moves southwestward until it disperses slowly. There exists a northward western boundary current along the east shore of the Indo-China Peninsula in the western SCS and an anticyclonic gyre in the southern SCS. But at the end of summer and beginning of autumn, a weak local cyclonic eddy forms in the Nansha Trough, then grows slowly and moves westward till it becomes a cyclonic gyre in the southern SCS in autumn. At the beginning of winter, there exists a cyclonic gyre in the northern and southern SCS, and there is a southward western boundary current along the east shore of the Indo-China Peninsula. But at the end of winter, an anticyclonic eddy grows and moves toward the western boundary after forming in the Nansha Trough. The eddy‘s movement induces a new opposite sign eddy on its eastern side, while the strength of the southward western boundary current gets weakened. This phenomenon continues till spring and causes eddies in the southern SCS.     

近海地形对热带气旋移动影响的数值试验

利用含地形、摩擦及非绝热加热外源强迫的准地转正压涡度方程模式 ,通过构造理想的坡地地形及椭圆型岛地形 ,首先分析了孤立地形的动力抬升作用及动力抬升、摩擦、非绝热加热 3者共同作用下对热带气旋 (TC)移动的影响。发现 :地形的动力抬升、摩擦作用以及地形附近海域的非绝热加热对TC移动均有影响 ;然后 ,引入了我国东南近海的实际地形 ,通过数值试验分析了TC移经或登陆在近海不同位置时TC移向、移速的可能变化 ,并给出了近海地形对TC移向、移速影响的空间分布。     

Repacking practice for G-3 engineering driller power unit with drive shaft of dual channel reverse circulation

In order to satisfy operating requirements for constant core drilling technology in reverse circulation with hollow-through DTH,the power unit of G-3 engineering driller was ameliorated. The new one with dual channel drive shaft, achieved the perfect assemble with transmission structure of the original power unit. It could interconvert according to need by using two sets of drive shafts with direct and reverse circulation. The repacked G-3 engineering driller carried on experiment in the field test in Luanchuan molybdenum mine of Henan, whose effect was very good.     

A tangential wind profile for simulating strong tropical cyclones with MM5

A new tangential wind profile for simulating strong tropical cyclones is put forward and planted into the NCARAFWA tropical cyclone bogussing scheme in MM5. The scheme for the new profile can make full use of the information from routine typhoon reports, including not only the maximum wind, but also the additional information of the wind speeds of 25.7 and 15.4 ms^-1 and their corresponding radii, which are usually provided for strong cyclones. Thus, the new profile can be used to describe the outer structure of cyclones more accurately than by using the earlier scheme of MM5 in which only the maximum wind speed is considered. Numerical experimental forecasts of two strong tropical cyclones are performed to examine the new profile. Results show that by using the new profile the prediction of both cyclones‘ intensity can be obviously improved, but the effects on the track prediction of the two cyclones are different. It seems that the new profile might be more suitable for strong cyclones with shifted tracks. However, the conclusion is drawn from only two typhoon cases, so more cases are needed to evaluate the new profile.     

Development of experimental apparatus about reverse circulation bit

A set of experimental apparatus on reverse circulation bit are developed, in order to lucubrate the mechanism of the new type reverse circulation bits, and the structure of the bits influencing the ability of taking core and carrying powder.Both the major structure of the equipment and the procession of experiment are described.     

Digital mapping of coastal boulders – high-resolution data acquisition to infer past and recent transport dynamics

Coastal boulder fields provide clues to long-term frequency-magnitude patterns of coastal flooding events and have the potential to play an important role in coastal hazard assessment. Mapping boulders in the field is time and labour-intensive, and work on intertidal reef platforms, as in the present study, is physically challenging. By addressing coastal scientists who are not specialists in remote sensing, this contribution reports on the possibilities and limitations of digital applications in boulder mapping in Eastern Samar, Philippines, where recent supertyphoons Haiyan and Hagupit induced high waves, coastal flooding and boulder transport. It is demonstrated how satellite imagery of sub-metre resolution (from Pléiades and WorldView-3 imagery) enables efficient analysis of transport vectors and distances of larger boulders, reflecting variation in latitudes of both typhoon tracks and approaching angles of typhoon-generated waves. During the investigated events, boulders with a-axes of up to 8 m were clearly identified to have been shifted for up to 32 m, mostly along the seaward margin of the boulder field. It is, however, hard to keep track of smaller boulders, and the length of a-axes and b-axes including their orientation is often impossible to map with sufficient accuracy. Orthophotographs and digital surface models created through the application of an unmanned aerial vehicle and the ‘Structure from Motion’ technique provide ultra-high-resolution data, and have the potential to not only improve the results of satellite image analysis, but also those from field mapping and may significantly reduce overall time in the field. Orthophotographs permit unequivocal mapping of a-axes and b-axes including their orientation, while precise values for c-axes can be derived from the respective digital surface models. Volume of boulders is best inferred from boulder-specific Structure from Motion-based three-dimensional models. Battery power, flight speed and altitude determine the limits of the area covered, while patches shielded by the boulders are difficult to resolve. For some tasks, field mapping remains mandatory and cannot be replaced by currently available remote sensing tools: for example, sampling for rock type, density and age dating, recording of lithological separation of boulders from the underlying geological unit and of geomorphic features on a millimetre to decimetre-scale, or documentation of fine-grained sediment transport in between the boulders in supratidal settings. In terms of future events, the digital products presented here will provide a valuable reference to track boulder transport on a centimetre to decimetre-scale and to better understand the hydrodynamics of extreme-wave events on a fringing reef coastline.     

辽宁中尺度数值模式产品和T213产品对比检验分析

利用国家级的气象预报产品质量客观检验评价系统,对辽宁中尺度模式预报MM5和T213数值预报的结果分别进行检验分析.检验类型分为历史资料检验和实时资料检验,检验要素包括地面降水、气温和高空500 hPa环流.检验结果显示,对于降水、气温的预报MM5模式预报检验结果优于T213数值预报,而对于500 hPa环流的检验结果T213更可信.     

Surface and deep water response to rapid climate changes at the Western Iberian Margin

Rapid climate changes at the onset of the last deglaciation and during Heinrich Event H4 were studied in detail at IMAGES cores MD95-2039 and MD95-2040 from the Western Iberian margin. A major reorganisation of surface water hydrography, benthic foraminiferal community structure, and deepwater isotopic composition commenced already 540 years before the Last Isotopic Maximum (LIM) at 17.43 cal. ka and within 670 years affected all environments. Changes were initiated by meltwater spill in the Nordic Seas and northern North Atlantic that commenced 100 years before concomitant changes were felt off western Iberia. Benthic foraminiferal associations record the drawdown of deepwater oxygenation during meltwater and subsequent Heinrich Events H1 and H4 with a bloom of dysoxic species. At a water depth of 3380 m, benthic oxygen isotopes depict the influence of brines from sea ice formation during ice-rafting pulses and meltwater spill. The brines conceivably were a source of ventilation and provided oxygen to the deeper water masses. Some if not most of the lower deep water came from the South Atlantic. Benthic foraminiferal assemblages display a multi-centennial, approximately 300-year periodicity of oxygen supply at 2470-m water depth. This pattern suggests a probable influence of atmospheric oscillations on the thermohaline convection with frequencies similar to Holocene climate variations. For Heinrich Events H1 and H4, response times of surface water properties off western Iberia to meltwater injection to the Nordic Seas were extremely short, in the range of a few decades only. The ensuing reduction of deepwater ventilation commenced within 500–600 years after the first onset of meltwater spill. These fast temporal responses lend credence to numerical simulations that indicate ocean–climate responses on similar and even faster time scales.     

Modelling observed and future runoff from a glacierized tropical catchment (Cordillera Blanca, Perú)

Monthly runoff from the 34.3% glacierized tropical catchment of Llanganuco in the tropical Cordillera Blanca, Perú, is successfully simulated and compared with a measured 44 year time series. In the investigation area, the climate is characterized by all-year round homogenous temperature conditions and a strong variability in air humidity and moisture content of the atmosphere. Thus, contrary to the mid latitudes, the seasonal variation in glacier melt strongly depends on moisture-related variables, rather than on air temperature. The here presented ITGG-2.0-R model aims for these requirements. The lack of moisture-related input data other than precipitation demands for an intermediate calibration step. Net shortwave radiation, the emissivity of the atmosphere and a sublimation/melt ratio are related to precipitation amounts. Runoff is well simulated and correlates with the measured record with r² = 0.76. Seasonally obtained r² are only slightly smaller. On a long-term, the cumulative deviation is minor, and the mean annual cycle of runoff is reproduced rather well (r² = 0.99). Based on four different IPCC climate change scenarios, future runoff is simulated. All runoff scenarios are modelled for the respective steady-state glacier extent. This leads to a reduction in the glacier size and a decreased amount of glacier melt. On the other hand, direct runoff increases due to larger glacier free areas. Consequently, mean annual runoff remains almost unchanged, but the seasonality intensifies considerably with more runoff during the wet and less runoff during the dry season.