2009年7月22日日全食期间湖北沙洋地区电离层扰动分析

发生在2009年7月22日亚太地区的日全食,为人们研究电离层扰动提供了一次难得的机会.基于沙洋地区采集的高频(1 Hz)GPS数据,通过对日食当天与前后几天电离层VTEC(Vertical Total Electron Content)的变化分析,结果显示日食期间电离层VTEC含量均呈现出一种先下降再上升的“水槽”变化趋势,且VTEC下降达到2～5 TECU,下降幅度达33.1％,VTEC的最小值与食甚时刻延迟为25.2～147.6 s.在日全食后期有中等强度的磁暴发生,与日食相互重合叠加共同对电离层VTEC变化造成影响,使得VTEC变化明显异于前后几天,最后定量的分析了磁暴对VTEC的影响.     

Analytical and experimental investigations on seismic performance of exterior beam–column subassemblages of existing RC‐framed building

Seismic performance of exterior beam–column subassemblages of reinforced concrete structure designed and detailed on the basis of the provisions of Eurocode and Indian Standards at different stages of their evolution is evaluated. Performance of the subassemblages designed and detailed according to the three different stages of codal evolution (gravity load design, ‘Nonductile’, and ‘Ductile’) is evaluated through analytical formulations and experimental investigations. In the ‘NonDuctile’ specimens, it has been observed that the shear distortion and degradation in stiffness and strength are significantly high. Performance of the ‘Ductile’ specimens based on Eurocode and Indian Standards is almost similar in terms of strength and stiffness degradation. Nevertheless, the specimen designed on the basis of Indian Standard shows higher energy dissipation at a given drift ratio. In the analytical study, shear and flexural failure of members of subassemblage and shear failure of the joint are considered as possible modes of failure of the beam–column subassemblage. For evaluating the shear strength of the joint region, a soften strut‐and‐tie model is used. Analytically obtained strengths based on the failure criteria of different components of the specimens have been first validated with experimental results and then used to determine the strength of the specimens. The investigation could indicate even the mode of failure at local level. It is utmost important to mention here that even the ductile specimens dissipate most of the energy through the development of damage in the joint region, which is neither desirable nor safe for the stability of whole structure. Copyright © 2013 John Wiley & Sons, Ltd.     

Integrating airborne and multi‐temporal long‐range terrestrial laser scanning with total station measurements for mapping and monitoring a compound slow moving rock slide

A slow moving compound rock slide located in the northern Apennines of Italy was mapped and monitored through the integration of Airborne Laser Scanning (ALS), multi‐temporal long‐range Terrestrial Laser Scanning (TLS), and Automated Total Station (ATS) measurements. Landslide features were mapped using a High Resolution Digital Terrain Model (HR‐DTM) obtained by merging ALS and TLS data in an Iterative Closest Point (ICP) procedure. Slope movements in the order of centimeters to a few decimeters were quantified with Differential TLS (D‐TLS) based on a Surface Matching approach and supported by ATS data to define stable reference surfaces. The integrated approach allowed mapping of the composite geomorphic features of the rock slide under examination, revealing its complex dynamic nature and further proving that laser scanning is a versatile and widely applicable tool for slope process analysis. Copyright © 2013 John Wiley & Sons, Ltd.     

Estimation of phosphorus loads with sparse data for agricultural watersheds in the Czech Republic

Abstract

Agricultural watersheds in the Czech Republic are one of the primary sources of non-point-source phosphorus (P) loads in receiving waters. Since such non-point sources are generally located in headwater catchments, streamflow and P concentration data are sparse. We show how very short daily streamflow and P concentration records can be combined with nearby longer existing daily streamflow records to result in reliable estimates of daily and annual P concentrations and loads. Maintenance of variance streamflow record extension methods (MOVE) can be employed to extend short streamflow records. Constituent load regressions are used to predict daily P constituent loads from streamflow and other time varying characteristics. Annual P loads are then estimated for individual watersheds. Resulting annual P load estimates ranged from 0.21 to 95.4 kg year^-1 with a mean value of 11.77 kg year^-1. Similarly annual P yield estimates ranged from 0.01 to 0.3 kg ha^-1 year^-1 with an average yield of 0.07 kg ha^-1 year^-1. We document how short records of daily streamflow and P concentrations can be combined with a national network of daily streamflow records in the Czech Republic to arrive at meaningful and reliable estimates of annual P loads for small agricultural watersheds.

Citation Beránková, T., Vogel, R. M., Fiala, D. & Rosendorf, P. (2010) Estimation of phosphorus loads with sparse data for agricultural watersheds in the Czech Republic. Hydrol. Sci. J. 55(8), 1417–1426.     

Book Review of Accretion Power in Astrophysics (3rd Edition) by Juhan Frank,Andrew King,Derek Raine Cambridge University Press, 2002, XIV+384 pp., £27.95, hardback (ISBN 0 521 62053 8), paperback (ISBN 0 521 62957 8).

The velocity, pressure, perturbation magnetic field, helicity and electromotive force driven by an isolated buoyant parcel in an unbounded, rapidly rotating, electrically conducting fluid in the limit of small Elsasser number and very small Ekman number are calculated, visualized and analyzed. On the scale of the parcel, the solution is identical to that obtained in the limit of small Ekman number and zero Elsasser number. On the scale of the Taylor-column, it is elongated in the direction of the applied magnetic field and compressed in the direction perpendicular to it. The α-effect calculated by averaging the electromotive force on planes normal to rotation is strongly anisotropic: near the parcel and in the inner part of the Taylor-column it is strongest when the applied magnetic field is perpendicular to rotation and gravity; in the outer part of the Taylor-column it is strongest when the applied magnetic field is in the same plane as rotation and gravity.     

Identification and Apportionment of Sources of Ozone‐forming Potential for Proper Reduction Strategies

In this study, results of source identification and apportionment for ambient volatile organic compounds (VOCs) from a previous work were used to estimate ozone‐forming potentials (OFPs) of effective sources for developing proper strategies for reduction of tropospheric ozone pollution. The source identification and apportionment of ambient VOC pollution within Yildiz Technical University's Davutpasa Campus (Istanbul, Turkey) was done by positive matrix factorization (PMF). The results suggested five effective source groups with the emissions related with paint use and solvent use having the highest contributions (36.8 and 28.2%). The results from PMF were used along with maximum incremental reactivities to estimate potentials of individual sources for ozone formation. It was found that biogenic emissions (3.78) and traffic related emissions (gasoline and diesel vehicle exhaust) (3.83 and 3.15, respectively) have the highest potential for ozone formation in terms of grams O₃/g VOC emitted. The results were used to suggest proper source‐based reduction strategies for OFP.     

TCA2003全站仪在游泳池长度控制中的应用

比赛用游泳馆泳池长度必须满足相应国际标准,对其精度有严格的质量控制。根据日照市游泳馆工程设计的特点及精度要求,提出了运用TCA2003型全站仪对游泳池长度进行全过程长度控制的方法,并进行了精度分析。     

PDA的野外数据采集成果预处理系统的设计与开发

为了适应测绘科学技术的信息化、自动化应用发展的需求,掌上电脑（PersonalDigitalAssistant,PDA）在测绘野外数据采集得到广泛应用,本文运用面向对象的思想设计并开发了野外数据采集成果预处理系统。该系统主要由数据通信、数据记录与检查、测量数据概算、原始成果记录表格自动生成、数据格式转换五个模块组成。将该系统与全站仪结合可实现野外测量数据的高效自动化数据采集及预处理概算,为内外业数据处理一体化奠定基础。     

全站仪在日照测量中的应用

从日照测量的目的和任务出发,介绍全站仪在日照测量中的具体应用及注意事项,通过实例分析日照测量外业数据采集的原则和内业成图的要求,实践证明利用全站仪进行日照测量工作,具有低成本、高效率、易操作的优点.     

TS30全站仪对不同反射目标测距精度的测试

为TS30全站仪配置不同的反射目标：GPR1标准棱镜、GPH1P精密棱镜、Leica 1.5”RRR反射球、Leica 40mm×40mm反射片、柯达灰板[1].在室内30m的范围内将全站仪与激光干涉仪比测,测试TS30全站仪在近距离上对不同反射目标的测距精度,希望能给相关人员提供一些参考.