REMOTE SENSING OF THE SEASONAL VARIATION IN COLUMN ABUNDANCE OF ATMOSPHERIC CH4*

Infrared solar spectra on clear days were measured automatically by an infrared solar spectrometer(ISS) with 0.4 cm^-1 resolution developed by us.A line-by line(LBL) computation method was used to calculate theoretical atmospheric absorption.In the wavelength range of 3.410-3.438 μm.the absorption is mainly due to atmospheric methane and water vapor.Columnatmospheric methane was retrieved from the recorded infrared solar spectra.The seasonal variation of column atmospheric methane in Hefei has been obtained from the measuremental data of nearly 18 months since the April of 1997.and found that it is similar to that of background data.The instruments.principles of measurement and some of results were introduced,and the results are also discussed briefly in the paper.     

中高层钢筋混凝土异形柱框架结构弹塑性时程分析

用杆模型编制了钢筋混凝土异形柱框架结构的弹塑性时程分析程序FEANT。采用该程序对一中高层大开间钢筋混凝土异形柱框架结构振动台试验模型进行了计算分析，计算值与试验值吻合较好，能满足工程需要。     

Evaluation of density in layer compaction using SASW method

SASW test, which is non-intrusive and rapid in the field application, was used to evaluate the layer density in the roller compaction without performing the complicated inversion process. The concept of normalized shear wave velocity was introduced to minimize the effect of confinement in the density evaluation. SASW test was performed to determine the shear wave velocity of the layer, and the free–free resonant column (FF–RC) test was adopted to determine the correlation between the normalized shear wave velocity and density of the site, which is almost unique independent of confinement. Testing and data reduction procedures of both tests were briefly discussed and an evaluation procedure of the field density was proposed by effectively combining in-situ shear wave velocity determined by the SASW test with the correlation between the normalized shear wave velocity and the density determined by the FF–RC test. Finally, the feasibility of the proposed method was verified by performing a field case study at Hoengsung road construction site. Field densities determined by the proposed method matched well with those determined by sand cone tests, showing the potential of applying the proposed method in the field density evaluation.     

Collection and analysis of atmospheric ozone samples

Anomalies found in the isotope ratios of ozone are traceable to the ozone formation process. Metastable electronic states may be responsible for the preferred production of the heavy molecules. While laboratory isotope data and first tropospheric results agree well in the magnitude of isotope enrichments, stratospheric measurements show often higher values. Only through the collection of ozone samples can sufficiently large amounts of gas be obtained to analyze the three isotopes ⁴⁸O₃, ⁴⁹O₃, and ⁵⁰O₃. Collector systems have been developed and successfully operated in the troposphere and in the stratosphere. They will play in the future an important role in atmospheric oxygen isotope studies.     

Boundary-layer ozone depletion as seen in the Norwegian Arctic in spring

Several years of measurements of ozone, hydrocarbons, sulphate and meteorological parameters from Spitsbergen in the Norwegian Arctic are presented. Most of the measurements were taken on the Zeppelin Mountain at an altitude of 474 m a.s.l. The focus is the episodes of ozone depletion in the lower troposphere in spring, which are studied in a climatological way. Episodes of very low ozone concentrations are a common feature on the Zeppelin Mountain in spring. The low ozone episodes were observed from late March to the beginning of June. When the effect of transport direction was subtracted, the frequenty of the low ozone episodes was found to peak in the beginning of May, possibly reflecting the seasonal cycle in the actual depletion process. Analyses based on trajectory calculations show that most of the episodes occurred when the air masses were transported from W-N. Ozone soundings show that the ozone depletion may extend from the surface and up to 3–4 km altitude. The episodes were associated with a cold boundary layer beneath a thermally stable layer, suppressing mixing with the free troposphere. The concentration of several individual hydrocarbons was much lower during episodes of low ozone than for the average conditions. The change in concentration ratio between the hydrocarbons was in qualitative agreement with oxidation of hydrocarbons by Br and Cl atoms rather than by OH radicals.     

A Eulerian air pollution model for Europe with nonlinear chemistry

A long-range transport model with nonlinear chemical reactions is described. The model contains 35 pollutants and 70 chemical reactions. This is a Eulerian model defined on a space domain containing the whole of Europe. The spherical space domain (corresponding to the Earth's surface covered by the model) is mapped into a square plane domain and discretized by using a 32×32 grid. The grid increments are equidistant (both along the Ox axis and along the Oy axis). The choice of values of the physical parameters involved in the model and the numerical treatment of the model are shortly discussed. The model is tested with meteorological data for 1985 and 1989. The numerical results are compared with measurements at stations located in different European countries. Extensive comparisons of ozone concentrations for July 1985 with measurements taken at 24 European stations are also carried out. Results concerning three episodes in July 1985 as well as results obtained in the study of the sensitivity of the ozone concentrations to variations of NO _x and/or anthropogenic VOC emissions are presented. The advantages and the limitations of such a model are discussed. The model is continuously improved by adding new modules to it. The plans for improvements in the near future are outlined.     

岩矿中稀土元素离子交换分离富集的改进及ICP—AES测定

本文通过对离子交换柱的规格改进,提高了分离效率,加快了分离速度(流速v/(ml·min~(-1)))可达1.0—1.5.结合分离富集条件的选择及ICP-AES测定方法的联用,使本法不分析周期短、所耗试剂省,且检测限低、精密度和准确度较高.经标样检验和矿样实测对比,其结果均令人满意.     

A case of no-wind plinian fallout at Pululagua caldera (Ecuador): implications for models of clast dispersal

The caldera of Pululagua is an eruptive centre of the Northern Volcanic Zone of the South American volcanic arc, located about 15 km north of Quito, Ecuador. Activity leading to formation of the caldera occurred about 2450 b.p. as a series of volcanic episodes during which an estimated 5–6 km³ (DRE) of hornblende-bearing dacitic magma was erupted. A basal pumice-fall deposit covers more than 2.2x10⁴ km² with a volume of about 1.1 km³ and represents the principal and best-preserved plinian layer. Circular patterns of isopachs and pumice, lithic and Md isopleths of the Basal Fallout (BF) around the caldera indicate emplacement in wind-free conditions. Absence of wind is confirmed by an ubiquitous, normally graded, thin ash bed at the top of the lapilli layer which originated from slow settling of fines after cessation of the plinian column (co-plinian ash). The unusual atmospheric conditions during deposition make the BF deposit particularly suitable for the application and evaluation of pyroclast dispersal models. Application of the Carey and Sparks' (1986) model shows that whereas the 3.2-, 1.6-, and 0.8-cm lithic isopleths predict a model column height of about 36 km, the 6.4-cm isopleth yields and estimate of only 21 km. The 4.9- and 6.4-cm isopleths yield a column height of 28 km using the model of Wilson and Walker (1987). The two models give the same mass discharge rate of 2x10⁸ kg s^-1. A simple exponential decrease of thickness with distance, as proposed by Pyle (1989) for plinian falls, fits well with the BF. Exponential decrease of size with distance is followed by clasts less than about 3 cm, suggesting, in agreement with Wilson and Walker (1987), that only a small proportion of large clasts reach the top of the column. Variations with distance in clast distribution patterns imply that, in order to obtain column heights by clast dispersal models, the distribution should be known from both proximal and distal zones. Knowledge of only a few isopleths, irrespective of their distance from the vent, is not sufficient as seemed justified by the method of Pyle (1989).     

Assessment of the Uncertainties in the NO2 and O3 Measurements by Visible Spectrometers

The column amounts of nitrogen dioxide (NO2) and ozone (O3) were measured using a visible spectrometer based on the twilight zenith-sky technique at two observatories located at similar latitudes in the northern part of Japan separated by a distance of 150 km. The measurements began in April 1991 at the Moshiri Observatory (44.4°N, 142.3°E) and in April 1994 at the Rikubetsu Observatory (43.5°N, 143.8°E). Since weather conditions and the possible influence from tropospheric pollution were not always identical at these two observatories, the overall accuracy of the measurements was studied comparing these data sets. The first year data obtained at a solar zenith angle of 90 degrees indicated that the NO2 slant column values at sunrise and sunset agreed within 0.36 and 0.54 × 1016 cm-2, respectively, corresponding to 5 % (June) and to 12 % (December) of the columns. The O3 values agreed within 0.76 × 1019 cm-2, corresponding to 4 % (March) 6 % (August) of the columns, although a part of the difference was systematic. The O3 column amounts were also compared to those obtained by the Dobson spectrometer at Sapporo (43.5°N, 143.8°E), whose latitude is similar to these observatories. When an air mass factor of 17.5 was used, the two-year Moshiri vertical column values agreed with the Dobson direct sun values to within 15 Dobson Units, or 3 6 % of the column. The difference between the two values was found to be due partly to the change in the air mass factor caused by seasonal and day-to-day changes in the shape of the O3 vertical profiles. These results confirm the reliability of the NO2 and O3 measurements by visible spectrometers at these sites for the Network for the Detection of Stratospheric Change (NDSC).