Evolution of deep-water stratigraphic architecture, Magallanes Basin, Chile

The ˜4000 m thick and ∼20 Myr deep-water sedimentary fill of the Upper Cretaceous Magallanes Basin was deposited in three major phases, each with contrasting stratigraphic architecture: (1) the oldest deep-water formation (Punta Barrosa Formation) comprises tabular to slightly lenticular packages of interbedded sandy turbidites, slurry-flow deposits, and siltstone that are interpreted to record lobe deposition in an unconfined to weakly ponded setting; (2) the overlying, 2500 m thick and shale-dominated Cerro Toro Formation includes a succession of stacked conglomeratic and sandstone channel-fill deposits with associated finer-grained overbank deposits interpreted to record deposition in a foredeep-axial channel-levee system; (3) the final phase of deep-water sedimentation is characterized by sandstone-rich successions of highly variable thickness and cross-sectional geometry and mudstone-rich mass transport deposits (MTDs) that are interpreted to record deposition at the base-of-slope and lower slope segments of a prograding delta-fed slope system. The deep-water formations are capped by shallow-marine and deltaic deposits of the Dorotea Formation.These architectural changes are associated with the combined influences of tectonically driven changes and intrinsic evolution, including: (1) the variability of amount and type of source material, (2) variations in basin shape through time, and (3) evolution of the fill as a function of prograding systems filling the deep-water accommodation. While the expression of these controls in the stratigraphic architecture of other deep-water successions might differ in detail, the controls themselves are common to all deep-water basins. Information about source material and basin shape is contained within the detrital record and, when integrated and analyzed within the context of stratigraphic patterns, attains a more robust linkage of processes to products than stratigraphic characterization alone.     

The transgressive infill of an inherited-valley system: The Springhill Formation (lower Cretaceous) in southern Austral Basin, Argentina

The Berriasian-Valanginian Springhill Formation of the Austral Basin of southern South America comprises fluvial to marine deposits. In order to interpret depositional systems and unravel the stratigraphic architecture of this unit in the southern region of the basin (Tierra del Fuego Province, Argentina), 500 m of cores combined with well-log data from 41 wells were studied. Facies associations corresponding to fluvial (A1-A6), estuarine (B1-B5) and open-marine (C1-C4) depositional environments were identified. These facies associations succeed each other vertically across the entire study area (6800 km²) forming a ∼120-m-thick transgressive succession. This unit filled a north-south-oriented valley system, developed in the underlying Jurassic volcanic complex.Lowstand fluvial deposits of the first stage of the valley-system fill occur in downdip segments of the system above a sequence boundary (SB). These fluvial deposits are overlain by coastal-plain and tide-dominated estuarine strata across an initial transgressive surface (ITS). In the northern sector the earliest valley infill is characterized by a transgressive fluvial succession, overlying a merged SB/ITS that is probably time-equivalent of marginal-marine deposits of the southern sector. The fluvial strata in the north are overlain by wave-dominated estuarine deposits. A drastic change to open-marine conditions is marked by a marine flooding surface, with local evidence of marine erosion (FS-RS). Open-marine strata are thin (<10 m) and dominated by lower-shoreface and offshore-transition deposits. They are capped by a younger flooding surface (FS), which represents the onset to offshore conditions across the study area due to a continuous long-term transgression that persisted until the Barremian.Although the interpreted depositional systems and stratigraphic architecture of the Springhill Formation resemble transgressive incised-valley-fill successions, the greater thickness and larger size of the Springhill valleys suggest inherited rift topography rather than valley development during a relative sea-level fall.     

Facies architecture of the Early Devonian Ural Volcanics,New South Wales

The Ural Volcanics are a early Devonian, submarine, felsic lava-sill complex, exposed in the western central Lachlan Orogen, New South Wales. The Ural Volcanics and underlying Upper Silurian, deepwater, basin-fill sedimentary rocks make up the Rast Group. The Ural Range study area, centrally located in the Cargelligo 1:100 000 map sheet area, was mapped at 1:10 000 scale. Seventeen principal volcanic facies were identified in the study area, dominated by felsic coherent facies (rhyolite and dacite) and associated monomictic breccia and siltstone-matrix monomictic breccia facies. Subordinate volcaniclastic facies include the pumice-rich breccia facies association, rhyolite – dacite – siltstone breccia facies and fiamme – siltstone breccia facies. The sedimentary facies association includes mixed-provenance and non-volcanic sandstone to conglomerate, black mudstone, micaceous quartz sandstone and foliated mudstone. The succession was derived from at least two intrabasinal volcanic centres. One, in the north, was largely effusive and intrusive, building a lava – sill complex. Another, in the south, was effusive, intrusive and explosive, generating lavas and moderate-volume (～3 km³) pyroclastic facies. The presence of turbidites, marine fossils, very thick massive to graded volcaniclastic units and black mudstone, and the lack of large-scale cross-beds and erosional scours, provide evidence for deposition in a submarine environment below storm wave-base. The Ural Volcanics have potential for seafloor or sub-seafloor replacement massive sulfide deposits, although no massive sulfide prospects or related altered zones have yet been defined. Sparse, disseminated sulfides occur in sericite-altered, steeply dipping shear zones.     

Otway Continental Margin Transect: Crustal architecture from wide‐angle seismic profiling across Australia's southern margin

The Otway Basin in southeastern Australia formed on a triangular‐shaped area of extended continental lithosphere during two extensional episodes in Cretaceous to Miocene times. The extent of the offshore continental margin is highlighted by Seasat/Geosat satellite altimeter data. The crustal architecture and structural features across this southeast Australian margin have been interpreted from offshore‐onshore wide‐angle seismic profiling data along the Otway Continental Margin Transect extending from the onshore Lake Condah High, through the town of Portland, to the deep Southern Ocean. Along the Otway Continental Margin Transect, the onshore half‐graben geometry of Early Cretaceous deposition gives way offshore to a 5 km‐thick slope basin (P‐wave velocity 2.2–4.6 km/s) to at least 60 km from the shoreline. At 120 km from the nearest shore in a water depth of 4220 m, sonobuoy data indicate a 4–5 km sedimentary sequence overlying a 7 km thick basement above the Moho at 15 km depth. Major fault zones affect the thickness of basin sequences in the onshore area (Tartwaup Fault Zone and its southeast continuation) and at the seaward edge of the Mussel Platform (Mussel Fault). Upper crustal basement is interpreted to be attenuated and thinned Palaeozoic rocks of the Delamerian and Lachlan Orogens (intruded with Jurassic volcanics) that thin from 16 km onshore to about 3.5 km at 120 km from the nearest shore. Basement rocks comprise a 3 km section with velocity 5.5–5.7 km/s overlying a deeper basement unit with velocity 6.15–6.35 km/s. The Moho shallows from a depth of 30 km onshore to 15 km depth at 120 km from the nearest shore, and then to about 12 km in the deep ocean at the limits of the transect (water depth 5200 m). The continent‐ocean boundary is interpreted to be at a prominent topographic inflection point 170 km from shore at the bottom of the continental slope in 4800 m of water. P‐wave velocities in the lower crust are 6.4–6.8 km/s, overlying a thin transition zone to an upper mantle velocity of 8.05 km/s beneath the Moho. Outstandingly clear Moho reflections seen in deep‐marine profiling data at about 10.3 s two‐way time under the slope basin and continent‐ocean boundary place further strong controls on crustal thickness. There is no evidence of massive high velocity (>7 km/s) intrusives/underplate material in the lower crust nor any synrift or early post‐rift subaerial volcanics, indicating that the Otway continental margin can be considered a non‐volcanic margin, similar in many respects to some parts of the Atlantic Ocean margins e.g. the Nova Scotia ‐ Newfoundland margin off Canada and the Galicia Bank off the Iberian Peninsula. Using this analogue, the prominent gravity feature trending northwest‐southeast at the continent‐ocean boundary may indicate the presence of highly serpentinised mantle material beneath a thin crust, but this has yet to be tested by detailed work.     

http://www.sciencedirect.com/science/article/pii/S1674987112001223

The Paleogene succession of the Himalayan foreland basin is immensely important as it preserves evidence of India-Asia collision and related records of the Himalayan orogenesis. In this paper, the depositional regime of the Paleogene succession of the Himalayan foreland basin and variations in composition of the hinterland at different stages of the basin developments are presented. The Paleogene succession of the western Himalayan foreland basin developed in two stages, i.e. syn-collisional stage and post-collisional stage. At the onset, chert breccia containing fragments derived from the hanging walls of faults and reworked bauxite developed as a result of erosion of the forebulge. The overlying early Eocene succession possibly deposited in a coastal system, where carbonates represent barriers and shales represent lagoons. Up-section, the middle Eocene marl beds likely deposited on a tidal flat. The late Eocene/Oligocene basal Murree beds, containing tidal bundles, indicate that a mixed or semi-diurnal tidal system deposited the sediments and the sedimentation took place in a tide-dominated estuary. In the higher-up, the succession likely deposited in a river-dominated estuary or in meandering rivers. In the beginning of the basin evolution, the sediments were derived from the Precambrian basement or from the metasediments/volcanic rocks possessing terrains of the south. The early and middle Eocene (54.7–41.3 Ma) succession of the embryonic foreland possibly developed from the sediments derived from the Trans-Himalayan schists and phyllites and Indus ophiolite of the north during syn-collisional stage. The detrital minerals especially the lithic fragments and the heavy minerals suggest the provenance for the late Eocene/Oligocene sequences to be from the recycled orogenic belt of the Higher Himalaya, Tethyan Himalaya and the Indus-suture zone from the north during post-collisional stage. This is also supported by the paleocurrent measurements those suggest main flows directed towards southeast, south and east with minor variations. This implies that the river system stabilized later than 41 Ma and the Higher Himalaya attained sufficient height around this time. The chemical composition of the sandstones and mudstones occurring in the early foreland basin sequences are intermediate between the active and passive continental margins and/or same as the passive continental margins. The sedimentary succession of this basin has sustained a temperature of about 200 °C and undergone a burial depth of about 6 km.     

建筑设计与造价控制浅析

建设项目投资的控制应贯穿于立项到竣工验收整个项目的各个阶段,施工前的决策和设计尤为重要。基于这种情况,本文简述了设计阶段造价控制的必要性,论述了在建筑设计的各阶段造价控制的措施,可有效地提高经济效益。     

回应气候的山地城镇与建筑设计

回应地方气候与地理是建筑融于自然的主要方式,建筑因此获得存在于那个特定地点的充分理由以及地方性.应用山地设计和生态建筑设计理论,采取图解分析和综合演绎的方法,从山地建筑选址、布局、体形选择、通风、日照和景观等方面,探索回应气候的城市与建筑设计准则与策略,提出结合气候的山地城镇设计具体策略和手法,包括建筑选址、地域景观、通风防风、空间应变和节能设计策略等,为节能和生态建筑设计的理论与实践研究奠定基础.     

利用砂体叠加部署聪明井提高勘探开发效果

通过相应属性的叠加可提高油气勘探开发的分析效果,减少投资风险。在勘探中采用精细沉积微相分析技术,通过对勘探目标区各小层沉积微相分析,编制各层的砂体分布图,提取各层砂体中主力砂体,编制小层主力砂体的叠加图;通过对叠加图分析,确定优势储层分布区域,进行成藏风险评价,提高了布井效果。而在油田开发调整中,通过对各单层进行精细沉积微相分析,确定其平面分布特征,结合各成因砂体的控制和动用程度,确定成因砂体内的剩余油分布情况,进而确定剩余油富集砂体,并制作剩余油富集砂体叠加图,据此以成因砂体为单元部署高效聪明调整井,提高了油田的采收率和开发效果。     

数据中心集成开发技术: 新一代GIS架构技术与开发模式

解决分布式异构多源空间数据共享、不同厂家的功能共享和合作开发是当前GIS开发和应用领域的难题.提出了数据中心集成开发模型框架, 并基于该框架提出了新一代GIS架构技术和开发模式, 介绍了数据中心的核心技术——数据仓库技术、功能仓库技术、搭建与配置技术等, 同时给出了国土数据中心的应用实例, 为基于数据中心大型信息化系统解决方案的实现提供了一种新的模型.      

文物建筑保护与旅游开发协调发展及其对策

以广州市为例从文物建筑的基本特征、文物建筑保护面临的问题、面对庞大的都市旅游市场的需求压力出发,提出基于文物保护法规前提之下符合两者不同利益需求的合作协调发展对策.