Virgin rock temperatures from well logs — accuracy analysis for some advanced inversion models

Temperature data from 18 measurement series obtained during logging of the Oseberg field in the northern North Sea are presented. Because the measurement series are taken at approximately the same depth, they should give identical temperatures after depth correction, and are suitable for assessing the performance of different models used to determine virgin rock temperatures from well log information.We have used this data set to test the properties of the different models given by Shen and Beck (1986). Although these models were built to simulate closely the thermal recovery of a well and are unbiased, the uncertainties in the temperature estimates when applied to real data are found to be no less than those from simpler (biased) models. This fact confirms the conclusion of Hermanrud (1989a) who showed that physical factors other than those presently accounted for significantly influence the thermal recovery of a borehole.     

装载GPCTD传感器的海翼水下滑翔机观测数据实时质量控制

Profiles observed by Sea-Wing underwater gliders are widely applied in scientific research. However, the quality control(QC) of these data has received little attention. The mismatch between the temperature probe and conductivity cell response times generates erroneous salinities, especially across a strong thermocline. A sensor drift may occur owing to biofouling and biocide leakage into the conductivity cell when a glider has operated for several months. It is therefore critical to design a mature real-time QC procedure and develop a toolbox for the QC of Sea-Wing glider data. On the basis of temperature and salinity profiles observed by several Sea-Wing gliders each installed with a Sea-Bird Glider Payload CTD sensor, a real-time QC method including a thermal lag correction, Argo-equivalent real-time QC tests, and a simple post-processing procedure is proposed. The method can also be adopted for Petrel gliders.     

龙口的海风及其影响

本文运用龙口气象站近５年自记风资料及实测探空资料，分析了龙口海风的生消规律、海风强度、空间结构及海风生成后对温、湿度的影响。同时为分析海风环流对大气污染物的影响。本文提出了一个简单地计算热内边界层的方法。     

抗冻蛋白的研究及其在生物技术中的应用

抗冻蛋白能够与冰晶结合，降低冰点并抑制冰的重结晶，从而使生物体免于冰冻伤害。就不同类型的抗冻蛋白的结构、起源、功能和抗冻作用机制进行了全面的回顾，并对国内近年来抗冻蛋白在生物技术中的应用进行了综述。     

利用卫星遥感资料对南海北部陆架海洋表层温度锋的分析

利用7年(1993～1999)月平均的SST卫星遥感资料，分析了南海北部陆架区域海洋表层温度锋在一年中的逐月变化特征，表明南海北部陆架海洋表层温度锋存在明显的季节内变化。结合风场的卫星遥感资料，分析了东北季风对南海北部陆架温度锋的影响，表明东北季风风速的增加有利于温度锋强度的增强。通过对黑潮南海流套入侵较强的1999年2月与流套入侵较弱的1998年2月的SST卫星遥感资料的对比分析，考察了黑潮南海流套的入侵对南海北部陆架温度锋的影响，结果表明黑潮流套的较强入侵能够增加陆架温度锋的强度，对温度锋的走向也会产生一定的影响。     

A thermal centroid or a mass centroid?

This study reveals the physical backgrounds of the geometric centroid and the thermal centroid of the Western Pacific Warm Pool (WPWP) and points out their differences. The geometric centroid (actually a very close approximation to the mass centroid) anomaly of the surface WPWP correlates more closely with the Niño-3 region sea surface temperature anomaly (Niño-3 SSTA, an important indicator of El Niño/La Niña events) than the surface thermal centroid. Taking the WPWP depth (or heat storage) into account, the “real” mass or thermal centroid of the WPWP might correlate better with the El Niño/Southern Oscillation (ENSO) signals.     

Mesozoic-Cenozoic tectonics and geodynamics of Altai, Tien Shan, and Northern Kazakhstan, from apatite fission-track data

Apatite fission-track (AFT) thermochronological modeling as a diagnostic tool for periods of stability (peneplanation) and tectonic activity (orogeny) has been broadly used in tectonic studies of Central Asia in recent years. We discuss more than 100 AFT ages of samples from the Kyrgyz Tien Shan and Altai and compare them with AFT data from northern Kazakhstan. Geological, geomorphological, and AFT data indicate intense activity in the Late Cenozoic Eurasian continental interior. The impact from the India-Eurasia collision on the northern Tien Shan, Altai, and northern Kazakhstan regions showed up at 11, 5, and 3 Ma, respectively, as a result of stress propagation into the continent, with the ensuing reactivation and mountain growth. We hypothesize that a distant effect of the Late Cenozoic India-Eurasia collision was to rejuvenate Paleozoic fault zones and to deform the Mesozoic sedimentary cover north of the collision front as far as the West Siberian Plate. The reactivation facilitated formation of tectonic oil and gas traps. The activity in northern Central Asia under the effect of the Indian indentation into Eurasia appears to continue and may evolve to include uplift of southern West Siberian plate with uplift.     

Recommended Values of 239Pu, 240Pu and 239+240Pu Concentrations in Reference Material IAEA-315 (Marine Sediment) Estimated by Thermal Ionisation Mass Spectrometry, Inductively Coupled Plasma-Mass Spectrometry and Alpha Spectrometry

The recommended concentrations of ²³⁹Pu, ²⁴⁰Pu and ^239+240Pu in reference material IAEA‐315 (marine sediment) were estimated by three analytical methods: isotope dilution thermal ionisation mass spectrometry (TIMS), isotope dilution inductively coupled plasma‐mass spectrometry (ICP‐MS) and alpha spectrometry. The determination of ²³⁹Pu and ²⁴⁰Pu (^239+240Pu by alpha spectrometry) was carried out with samples from randomly selected bottles using each method. Plutonium‐238 was also measured by alpha spectrometry. A plutonium‐242 reference material was used as a spike for the quantitative analysis. The influence of ²⁴²Pu in the samples was therefore calculated; however, this contribution was less than the range of uncertainty and did not influence the final results. The obtained data were statistically analysed using variance component analysis and paired comparison. The combined standard uncertainties from “method/measurement”, “bottle” and “sub‐sample” were in the order of 3 to 6%. The main contributions to the uncertainty were from the material heterogeneity and from systematic differences between methods. Based on this study with twenty‐seven analyses using 10–14 g sample mass, concentrations of (38 ± 3) Bq kg^?1, (28 ± 3) Bq kg^?1 and (66 ± 4) Bq kg^?1 are proposed as recommended values for ²³⁹Pu, ²⁴⁰Pu and ^239+240Pu, respectively, and (9.5 ± 0.4) Bq kg^?1 for ²³⁸Pu as an information value in reference material IAEA‐315. In mass concentration units, these amount to (16.4 ± 1.2) ng kg^?1, (3.3 ± 0.4) ng kg^?1 and (0.015 ± 0.003) ng kg^?1 for ²³⁹Pu, ²⁴⁰Pu and ²³⁸Pu, respectively. The certified reference materials NIST 4350B and NIST 4354 were also analysed by TIMS for quality assurance of the method used in this study.