Vertical dynamic response of a rigid foundation embedded in a poroelastic soil layer

A simplified analytical method is presented for the vertical dynamic analysis of a rigid, massive, cylindrical foundation embedded in a poroelastic soil layer. The foundation is subjected to a time‐harmonic vertical loading and is perfectly bonded to the surrounding soil in the vertical direction. The soil underlying the foundation base is represented by a single‐layered poroelastic soil based on rigid bedrock while the soil at the side of the foundation is modeled as an independent poroelastic layer composed of a series of infinitesimally thin layers. The behavior of the soil is governed by Biot's poroelastodynamic theory and its governing equations are solved by the use of Hankel integral transform. The contact surface between the foundation base and the soil is smooth and fully permeable. The dynamic interaction problem is solved following standard numerical procedures. The accuracy of the present solution is verified by comparisons with the well‐known solutions obtained from other approaches for both the elastodynamic interaction problem and poroelastodynamic interaction problem. Numerical results for the vertical dynamic impedance and response factor of the foundation are presented to demonstrate the influence of nondimensional frequency of excitation, soil layer thickness, poroelastic material parameters, depth ratio and mass ratio on the dynamic response of a rigid foundation embedded in a poroelastic soil layer. Copyright © 2008 John Wiley & Sons, Ltd.     

EXPERIMENTAL STUDY ON SOIL MOISTURE USING DUAL-FREQUENCY MICROWAVE RADIOMETER

1INTRODUCTIONSoil is the basis of human's living. Soil moisture plays asignificant role in studying the matter and energy ex-changes in global hydrology sphere. The evaporation ofsoil moisture has an influence on the water vapor cycle.Meanwhile soil moisture is also one of the firsthandmeasurable parameters in crop yield estimation and wa-ter resources management (JACKSON et al., 1993). Theinfluence of the interaction of land and atmosphere onsoil moisture can bring about anomalous cli…     

Shock-induced temperatures of MgO

Shock-compressed MgO radiates thermally at temperatures between 2900 and 3700 K in the 170–200 GPa pressure range. A simple energy-transport model of the shocked-MgO-targets distinguishes between different shock-induced radiation sources in these targets and provides estimates of spectral absorption-coefficients, α _ΛMgO, for shocked MgO (e.g. at 203 GPa, α _ΛMgO˜ 630, 7500, 4200 and 3800 m⁻¹, at 450, 600, 750 and 900 nm, respectively). The experimentally inferred temperatures of the shock-compressed states of MgO are consistent with temperatures calculated for MgO assuming that (1) it deforms as an elastic fluid, (2) has a Dulong-Petit value for specific heat at constant volume in its shocked state, and (3) undergoes no phase transformation below 200 GPa.     

Impacts of salinity parameterizations on temperature simulation over and in a hypersaline lake

In this paper,we introduced parameterizations of the salinity effects(on heat capacity,thermal conductivity,freezing point and saturated vapor pressure) in a lake scheme integrated in the Weather Research and Forecasting model coupled with the Community Land Model(WRF-CLM). This was done to improve temperature simulation over and in a saline lake and to test the contributions of salinity effects on various water properties via sensitivity experiments. The modified lake scheme consists of the lake module in the CLM model,which is the land component of the WRF-CLM model. The Great Salt Lake(GSL) in the USA was selected as the study area. The simulation was performed from September 3,2001 to September 30,2002. Our results show that the modif ied WRF-CLM model that includes the lake scheme considering salinity effects can reasonably simulate temperature over and in the GSL. This model had much greater accuracy than neglecting salinity effects,particularly in a very cold event when that effect alters the freezing point. The salinity effect on saturated vapor pressure can reduce latent heat flux over the lake and make it slightly warmer. The salinity effect on heat capacity can also make lake temperature prone to changes. However,the salinity effect on thermal conductivity was found insignificant in our simulations.     

基于TC35的远程温度监测报警系统

针对日常生活中因对温度变化的忽视引起的各种问题,提出一种对温度进行远程监测并短信通知用户的系统,以达到向用户进行温度报警的目的.系统主要由STC89C52单片机,液晶显示器1602,温度传感器DS18B20,TC35模块4大部分构成,首先通过温度传感器DS18B20采集当前环境温度,然后利用液晶显示器1602将当前温度显示出来,与此同时单片机判断当前温度值,当前温度超过温度上限值时,单片机控制GSM模块向指定手机号发送一条短信.结果显示,当温度超过设定温度时,指定手机会收到一条报警短信,提醒用户当前的温度超过了温度上限.通过与传统的温度检测系统作对比,系统能够得到较准确的温度检测值其测温误差能够控制在0.4以下,并且通过发送短信来对温度进行远程实时监测.     

水杨酸对蛋白核小球藻(Chlorella pyrenoidosa) 生长及抗逆相关基因的影响

以蛋白核小球藻(Chlorella pyrenoidosa)为研究对象, 首先克隆了热激蛋白70(HSP70)和磷 酸甘油酸激酶(PGK)基因全长序列, 然后研究了0-20μg/mL 水杨酸对高温胁迫下HSP70 和PGK 基 因表达, 以及蛋白核小球藻生长、可溶性糖和蛋白含量的影响。结果获得了蛋白核小球藻HSP70 基 因的cDNA 序列2405 bp, 包括60 bp 的5'-非编码区(UTR)、1959 bp 的开放阅读框(ORF)和386 bp 的3'-UTR 和PGK 基因的cDNA 序列1664 bp, 包括35 bp 的5'-UTR, 1398 bp ORF 和231 bp 3'-UTR. 序列比较和分析表明该蛋白核小球藻HSP70 序列与其它绿藻的同源性高达83%-91%, PGK 为 70%-75%.荧光定量PCR 结果显示随着水杨酸浓度的增加, HSP70 和PGK 的表达量在12h 和24h 均有所增加, 而在10 μg/mL 水杨酸浓度下表达量最大, 12h 时分别为对照组的2.57 倍和1.56 倍, 24h 则为1.71 倍和1.79 倍。1-20μg/mL 水杨酸可促进该藻的比生长速率、可溶性糖和蛋白含量的升高。 本文结果表明一定浓度水杨酸对高温胁迫蛋白核小球藻有缓解作用, 且5 和10 μg/mL 水杨酸的效果 最显著。     

温度和盐度对埋栖性双壳类泥蚶(Tegillarca granosa) 呼吸、排泄的影响

在人工条件下采用静水封闭呼吸瓶的方法研究了温度、盐度对泥蚶(Tegillarca granosa)呼 吸、排泄的影响, 并综合分析了温度、盐度交互作用对呼吸、排泄的影响程度, 为泥蚶基础生物学研 究积累了资料。结果表明, 在设定的不同温度条件下泥蚶耗氧率变化范围0.63-4.47mg/(g·h), 单因 素方差分析结果显示4 个盐度条件下泥蚶耗氧率的差异均极显著(P<0.01); 排氨率的变化范围 123.11-955.68μg/(g·h), 排氨率受温度的影响也均极显著(P<0.01); 经回归发现, 在温度13-31℃ 范 围内, 耗氧率和排氨率均与温度的变化呈显著的指数相关。除温度为18℃ 时, 其它各温度条件下, 不同盐度梯度间的耗氧率差异不显著(P>0.05), 盐度对排氨率影响的变化趋势不一致。在温度 (13-31℃)和盐度(18-28)时, 温度和盐度对耗氧率、排氨率的影响均存在交互作用, 耗氧率(Y)、排 氨率(Y)与温度(T)和盐度(S)之间的二元线性回归关系为Y=a+bT+cS+dT×S.泥蚶呼吸排泄的O:N 比 在4.50-13.07 之间, 平均值为7.16.泥蚶呼吸排泄的代谢活动受温度、盐度的影响显著。     

Environmental effects on the reproduction and fecundity of the introduced calcareous sponge Paraleucilla magna in Rio de Janeiro,Brazil

The calcareous sponge Paraleucilla magna (Porifera, Calcarea) has been the subject of several studies in the last decade. It was first described along the Brazilian coast, where it is considered cryptogenic, and was subsequently found in the Mediterranean, where it is considered invasive. The wide artificial distribution of this species allows us to compare different aspects of the biology of an introduced species in different locations. Here, we analysed the effects of selected environmental parameters on the reproductive dynamics of P. magna in Rio de Janeiro (Brazil) over 18 months and compared our results with those obtained for the same species in the Mediterranean Sea. Specimens were collected monthly and analysed through histological methods. The density of reproductive elements in each month was calculated, and the effects of environmental parameters (photoperiod, precipitation, temperature, phytoplankton and bacterioplankton) were analysed using a regression tree analysis. Paraleucilla magna was reproductive throughout the study period. The densities of the reproductive elements (oocytes, embryos and larvae) showed no seasonality, and this species presented one of the highest reproductive efforts documented to date in the phylum Porifera (99.0 oocytes · mm^?3; 89.0 embryos · mm^?3; 319.0 larvae · mm^?3). The main environmental parameters related to the reproduction of P. magna were temperature, photoperiod and bacterioplankton. Temperature was the main driver associated with the densities of oocytes and embryos, while bacterioplankton was the main driver of larvae (positive relationships). In Rio de Janeiro, larvae were present and continuously released. This strategy is different from that observed in the Mediterranean, where a larger larval output was observed but only during the summer months. Our results show that P. magna is a species with a strong invasive potential, considering its high and continuous reproductive effort. This high fecundity stimulated by high temperatures may be a key factor contributing to the growth of P. magna populations and its invasion of new areas.     

Emerging coral diseases: a temperature‐driven process?

In the last few decades there has been a surge in research focusing on coral disease. While climate change, specifically rising sea surface temperature, has been proposed as a major and growing driver of the emergence of marine diseases, to date a solid connection between disease epizootics and elevated sea surface temperature has not been established. However, a wealth of data now exists, compiled from many different perspectives, that may support such a connection. In this work we provide a comprehensive review targeting one coral disease, black band disease, that spans the infection process, pathobiology, and epizootiology, and links specific mechanisms of the disease process to increasing temperatures. This temperature‐driven pattern of infection can be expanded to include similar processes associated with other temperature‐related coral diseases. The conclusions presented here are based upon the results of many studies using a diverse suite of approaches that have been synthesized to argue that the emergence and continuing spread of black band disease is linked to warming sea surface temperatures. In summary, as global ocean temperatures increase seasonally and over decades, the environment shifts to become more favorable for the growth of potentially pathogenic microorganisms endemic to the immediate environment of the reef. The increase in the relative number of potential pathogens in the microbial community produces microenvironments conducive to the growth of other potential pathogens, leading to infection by a polymicrobial consortium. This consortium is easily perturbed by a (seasonal) temperature decrease, but remains associated with the coral host and can be reactivated with a subsequent seasonal increase in temperature, resulting in a cycle of temperature‐dependent disease emergence.     

Macrobenthic composition of the southeast continental shelf of India

Macrobenthic faunal composition was studied at six different depth ranges (30–50, 51–75, 76–100, 101–150, 151–175 and >176 m) in five transects (off Karaikkal, Parangipettai, Cuddalore‐SIPCOT, Cheyyur and Chennai) in the continental shelf of southeast coast of India. Eleven diverse taxa were found, comprising 113 species of polychaetes, 14 species of bivalves, 10 species of amphipods and ‘others’ (five tanaids, five crabs, four isopods, three echinoderms, two shrimps, two cnidarians, two fishes and one cephalochordate). Polychaetes were the dominant taxa, constituting 88.5% of the total abundance and 30.7% of the total biomass. The number of species (seven per 0.2 m² at >176 m depth range in Chennai to 46 per 0.2 m² at 30–50 m in Cheyyur), abundance (216 per 0.2 m² at >176 m in Karaikkal to 353 per 0.2 m² at 30–50 m in Cheyyur) and biomass (0.09 g per 0.2 m² at 151–175 m in Karaikkal and 4.6 g per 0.2 m² at 30–50 m in Cheyyur) of macrobenthos decreased with increase in depth. DO decreased gradually from 30 m depth; beyond 150 m, the decrease was pronounced due to the presence of the oxygen minimum zone. Using the distance based linear model (DISTLM), it was found that the environmental variables explained about 73.3% of the total variability in macrofaunal distribution. The heavy metals cobalt and mercury, as well as water pressure (proxy for depth), showed a significant relationship with macrofauna, explaining respectively 9, 7.3 and 7% of the total variability. The contribution of other variables was smaller.