地壳形变的普适表达与对地倾斜的再认识

给出了地壳形变的普适表达式。对地面倾科的内在实质进行了分析，指出它具有剪应变的性质     

细粒含量对冰碛土抗剪强度影响的实验研究

为研究细粒组颗粒在浸水/降雨条件下产生迁移对冰碛土抗剪强度的影响,从西藏林芝市帕隆藏布嘎隆寺沟流域内采取冰碛土样品,进行7种不同细粒（粒径小于2 mm）含量情况下的冰碛土比重和相对密度的测试,开展了不同围压下的大型饱和固结不排水三轴（CU）实验。结果表明：（1）细粒含量对干密度的影响较小,不同细粒含量的冰碛土孔隙比大致相同,细颗粒对孔隙具有改造作用,不同细粒含量会引起孔隙结构的差异,从而导致冰碛土的结构差异,最终导致抗剪强度的不同;（2）细颗粒迁移导致冰碛堤坡脚和内部一定深度细粒含量较高,达到一定的量值时,抗剪强度明显降低,冰碛堤容易发生剪切破坏;（3）细粒含量对抗剪强度参数的变化具有重要影响,从中还可以反映出冰碛土结构控制的变化：粗颗粒控制→粗细颗粒共同控制→细颗粒控制。研究结果对于评价冰碛堤的稳定性具有重要意义。     

Seismic analysis of diagrid structural frames with shear-link fuse devices

This paper presents a new concept for enhancing the seismic ductility and damping capacity of diagrid structural frames by using shear-link fuse devices and its seismic performance is assessed through nonlinear static and dynamic analysis.The architectural elegancy of the diagrid structure attributed to its triangular leaning member configuration and high structural redundancy make this system a desirable choice for tall building design.However,forming a stable energy dissipation mechanism in diagrid framing remains to be investigated to expand its use in regions with high seismicity.To address this issue,a diagrid framing design is proposed here which provides a competitive design option in highly seismic regions through its increased ductility and improved energy dissipation capacity provided by replaceable shear links interconnecting the diagonal members at their ends.The structural characteristics and seismic behavior(capacity,stiffness,energy dissipation,ductility) of the diagrid structural frame are demonstrated with a 21-story building diagrid frame subjected to nonlinear static and dynamic analysis.The findings from the nonlinear time history analysis verify that satisfactory seismic performance can be achieved by the proposed diagrid frame subjected to design basis earthquakes in California.In particular,one appealing feature of the proposed diagrid building is its reduced residual displacement after strong earthquakes.     

条形基础砂土地基的破坏模型试验

为了研究条形基础砂土地基的剪切破坏形式和承载机理,在相似理论的指导下,进行了一组条形基础砂土地基的模型试验,模拟了砂土地基受荷后产生变形、扩展直到破坏的全过程;测量并分析了地基中不同点处的土压力大小及其分布规律,观测了剪切带的形成和发展过程。结果表明,模型试验能够很好地体现砂土地基变形、破坏的整个过程及其沉降变形特性、地基中各点的真实应力状态及其变化规律,对于研究深基坑变形过程和破坏形态具有应用价值。     

四川甘孜生康剪切混杂岩带物质组成、变形特征及演化历史

甘孜生康剪切混杂岩带,它初始发育在陆棚与大陆基之间,是“再生”小洋盆关闭、俯冲－碰撞乃至斜冲剪切、左行走滑综合作用的产物。带内由不同岩性,不同层位,不同时代的构造岩块与遭受强烈剪切变形的粉砂岩、板岩“基质”组合而成。宏观上,无层无序,块体内有序,是造山带特有的非史密斯地层体。     

辽西医巫闾山地区中生代两期韧性变形的研究

医巫闾山地区的韧性剪切构造是中生代两期韧性变形作用的产物。早期韧性变形中a线理发育,线理走向和糜棱面理走向基本一致,线理在xy面上的侧伏角绝大多数<30°;该期韧性变形是以左行走滑运动为主。晚期韧性变形中a线理发育,线理倾伏向和糜棱岩中糜棱面理倾向相近,线理在xy面上侧伏角主要在45°～90°之间;该期韧性变形是伸展作用的产物。医巫闾山中生代两期韧性剪切变形作用表明,在侏罗纪至早白垩世期间辽西地区不仅发生了强烈挤压推覆作用和伸展作用,也发生了大规模左行走滑作用。该韧性变形作用的发现对进一步研究辽西中生代的构造演化序列、期次和构造格架转换等问题有重要意义。     

中国上地幔剪切波速度结构的初步研究

本文通过合成SH波理论地震图的方法,利用SS-S走时和SS波波形资料,研究了我国上地幔剪切波速度结构。初步结果表明,我国大陆上地幔可以分成两个独立不同的速度结构模型:一是青藏高原;另一是中国大陆东部。两部分均存在剪切波低速层,但埋藏深度不同,高原部分是100km,东部地区是60km,两部分的差异大约在350km以下趋于消失。在405km和660km深处存在剪切波的速度间断面。400km以下青藏高原和中国大陆东部地区剪切波的速度结构与北美洲、北大西洋西部、欧洲、阿尔卑斯带地区的结构一致,说明在这几个地区上地幔剪切波速度结构的横向变化在400km以下很小。     

东昆仑东段东昆中构造带韧性剪切作用及其地质意义

东昆仑东段东昆中构造带经历了多期(次)构造事件,现今保留了复杂多样的构造样式。哈图沟、清水泉—塔妥和沟里等地区构造变形十分强烈,且发育有呈NWW-SEE展布的韧性剪切带。通过野外调研及显微构造研究,对东昆中构造带几何学、运动学及动力学等进行了分析,并通过费氏台和EBSD技术对其进行石英C轴组构分析后认为该剪切带为一压-扭性构造界面,且早期为左旋逆冲,晚期为右旋走滑,变形温度为400~550℃。对剪切带内的石英亚颗粒及动态重结晶粒度测量计算出研究区内韧性剪切带古应力值约为153.791 MPa。哈图沟牦牛山组变形砾岩(4个测点)有限应变测量结果显示,越靠近东昆中断裂带砾石Flinn指数、应变程度、罗德系数(绝对值)越大,且Flinn指数均大于1,属拉伸变形。结合区域地质资料,认为东昆仑东段东昆中韧性剪切带形成于晚海西—印支期。     

玻璃纤维增强聚合物抗浮锚杆抗拔性能试验研究与机制分析

抗浮锚杆作为一种竖向锚固技术在我国许多地区广泛应用,锚杆作为抗浮结构的核心其性能受到极大关注。但因钢材易腐蚀,传统金属锚杆的耐久性受到质疑,特别是地铁等地下工程存在杂散电流,限制了金属抗浮锚杆的应用。玻璃纤维增强聚合物(GFRP)抗浮锚杆是一种由树脂基体和玻璃纤维复合而成的新材料,与金属锚杆相比,它具有耐腐蚀、抗拉强度高、自重轻等优良特性。通过植入式裸光纤传感测试技术对GFRP抗浮锚杆的界面应力分布、荷载传递规律及破坏机制进行了研究,论证了GFRP抗浮锚杆使用的适宜性。试验表明,GFRP抗浮锚杆破坏以杆体基体材料剪切破坏为主,?28 mm锚杆极限抗拔力为250 kN,能够满足工程需要;杆体轴力沿深度方向逐渐递减,并且超过一定长度后杆体不再受力。结果显示,中风化岩地区,当锚固段长度为3.95⁶.95 m时,轴力影响深度范围约为3.7 m,说明GFRP抗浮锚杆同样存在临界锚固深度问题。锚杆界面剪应力呈不均匀分布,剪应力峰值随荷载的增加逐渐向下转移,同时0值点也向杆体深部转移。研究成果可为GFRP抗浮锚杆应用于工程实际提供依据。     

Three-dimensional model and late stage warping of the Plattengneis Shear Zone in the Eastern Alps

The Plattengneis shear zone is a 250–600 m thick, flat lying, Cretaceous, eclogite facies, mylonitic shear zone, with north-over-south transport direction, that is exposed over almost 1000 km² in the Koralpe region along the eastern margin of the Alps. Although the shear zone is one of the largest in the Alps, its role in the Eoalpine metamorphic evolution and the subsequent exhumation of the region, remain enigmatic and its large-scale geometry is not well understood. The outcrop pattern suggests that the shear zone is made up of a single sheet that is folded into a series of open syn- and antiforms with wavelengths of about 10 km. Eclogite bodies occur above, within and below the shear zone and there is no metamorphic grade change across the shear zone. In the south, the fold axes strike east–west and plunge shallowly to the east. In the north, the fold axes are oriented in north–south direction and form a dome shaped structure of the shear zone. Total shortening during this late stage warping event was of the order of 5%. Indirect evidence constrains this folding event to have occurred between 80 and 50 Ma and the fold geometry implies that the final exhumation in the Koralpe occurred somewhat later than further north. Interestingly, the shear zone appears to strike out of the topography in the south and dip into the topography in the north, so that north of the shear zone only hanging-wall rocks are exposed and south of it only foot-wall rocks. Possibilities for the geometric relationship of the Plattengneis shear zone with the surrounding south dipping detachments are discussed.