钻孔压水试验水压式栓塞排水泄压问题研究

压水试验水压式栓塞较其他类型栓塞可靠、灵活,但一直存在试验结束后排水泄压难题,使该类型栓塞使用局限于浅孔及地下水位高的钻孔。本文对该问题进行了研究,提出了解决方案,设计了新型水压式栓塞结构。解决了一直以来水压式栓塞的排水泄压难题,突破了试验孔深限制,使水压式栓塞能得到广泛应用。介绍了该新型水压式栓塞的结构和工作原理以及工程应用效果。     

纳米氧化物颗粒对水基钻井液润滑性能影响的试验研究

通过在水基钻井液中添加纳米氧化物颗粒,来改善其润滑性能。选用了Al2O3、TiO2及SiO2三种纳米氧化物颗粒作为钻井液改性添加剂,利用极压润滑仪及销盘摩擦磨损实验仪研究了添加不同种类和浓度纳米颗粒氧化物对水基钻井液的润滑性能及减摩效果的影响。结果表明,所添加的3种球形纳米颗粒均有润滑减阻减摩的效果,其中SiO2颗粒的钻井液的润滑性能、滤失性能以及减摩效果都是最好的。当纳米SiO2颗粒加量为0.4%时,滤失量最小,润滑系数降低率达到15.6%,摩擦系数降低率为32.0%,磨痕轨迹平滑,减摩效果最为明显。当纳米颗粒浓度超过0.5%时,减摩效果降低,磨盘脱层磨损明显。     

从同震和震后形变分析1668年M8.5级郯城地震对周边地震活动性的影响

以山东郯城1668年大地震为例,以前人地表地质调查结果为约束,利用弹性位错理论初步获取了该地震的同震破裂模型;在此基础上,基于粘弹性分层模型分析了该地震的同震和震后形变,同时以主震断层为接收断层计算了库仑应力分布,进一步讨论了地幔不同粘滞性系数对地表形变和库仑应力变化的影响。计算结果显示,该地震是一个右旋走滑为主兼有一定逆冲性质的地震,其同震位移巨大,能量释放较彻底;同震破裂造成震中郯城县西北、东北和南部部分断层库仑应力增加,而震后形变使得这些断层库仑应力进一步增加,在单县、宿迁和日照等地,地震后350 a库仑应力变化量达到+1bar-+1MPa量级;地幔粘滞性系数不同,形变量和库仑应力变化达到稳定的时间不同,但最终趋于稳定的数值基本一致。     

辽宁省地下水动态成因类型分析

根据辽宁省2006—2010年地下水水位实际监测数据,分析地下水水位动态变化规律、形成原因及发展趋势,再结合地下水动态变化的自然与人为影响控制因素,以及地下水的补给、径流、排泄条件等,将辽宁省地下水动态成因类型划分为:气候型、开采型、灌溉型、水文型和径流型,经过较为全面系统的统计分析计算,绘制出地下水动态变化历时曲线,对五种地下水动态成因类型分别予以较为详细的综合分析研究,总结出辽宁省地下水动态变化规律特征。     

云南会泽大黑山铝土矿地球化学特征及其物源分析

大黑山铝土矿赋存于上二叠统宣威组底部,下伏地层为峨眉山玄武岩。矿石结构主要以泥晶结构为主,具有少量鲕状、粒屑结构。矿石构造以致密块状构造为主,局部呈层状、似层状。铝土矿石中Al2O3与Fe2O3、Si O2呈现较好的负相关关系,Ti O2与Zr、Hf、Nb、Ta相关性较好,Zr-Hf、Nb-Ta的相关性拟合度很高。铝土矿与峨眉山玄武岩样品具有相似的稀土元素配分模式。综合稳定元素相关性、微量元素及稀土元素标准化图解、lg Ni和lg Cr二元图解等分析方法对大黑山铝土矿的成矿物质来源进行探讨,研究结果表明铝土矿的成矿物质来源主要来自峨眉山玄武岩。     

An experimental investigation into the influence of the damage openings on ship response

Ship motions after damage are difficult to evaluate since they are affected by complex phenomena regarding fluid and structures interactions. The possibility to better understand how ship behavior in damage is influenced by these phenomena is important for improving ship safety, especially for passenger vessel.In this paper an experimental campaign is carried out on a passenger ferry hull, to show the effects of the water dynamics across damage openings on ship motions. Novel aspects of this research include the study of the effects of the damage position on the ship roll response. The study is carried out for still water and for beam regular waves at zero speed.Results from the experiments carried out underline that the roll behavior of a damaged ship is affected by the position of damage opening and not only by its size. Assuming the same final equilibrium conditions after flooding but characterized by different damage openings it is possible to observe how motions RAOs and roll decay characteristics modify according to the opening locations.     

Axial friction response of full-scale pipes in soft clays

The axial friction response of subsea pipelines in soft clays is a very important aspect for designers of subsea pipelines but the response is not well understood so far. There is a pressing need for the comprehension of the response. In this paper, model tests are performed using full-scale pipes coated with polyethylene (PE) to study the effects of the set-up period, the pipe diameter, the buried depth of the pipe, the shear strength of soft clays and the loading rate on the axial friction response of pipelines in soft clays. The variations of the axial friction coefficient are analyzed using the effective stress method based on model test results. The results show that the axial friction resistance increases with the increasing pipe diameter but the effect of the pipe diameter on the axial friction coefficient can be neglected. The ultimate axial resistance also increases with the increase of the buried depth of pipelines, the undrained shear strength of soft clays and the loading rate. The axial friction coefficient increases with the increasing loading rate. However, the axial friction coefficient decreases with the increasing buried depth. The method to determine the axial friction coefficient is developed by analyzing model test results, which considers the effects of the diameter, the buried depth, the undrained shear strength of soft clays and the loading rate. The study results not only extend the industry data base but also supply a basis to determine the axial friction coefficient of PE-coated pipes in soft clays for ocean engineering geological investigations.     

Compression limit state of HVAC submarine cables

An industry accepted standard does not currently exist for determination of compression limits in a subsea cable. This has resulted in most manufacturers specifying that subsea cables are not permitted to be axially loaded in compression.Additionally industry guidance does not exist regarding the consequences of inducing compression forces within subsea cables and the resulting effect on cable integrity. Industry recommended practice and guidance also does not have any information regarding experimental test arrangements to determine allowable compression levels within a subsea cable. This lack of modelling/testing guidance along with manufacturer recommendations of zero compressive loads within subsea cables results in overly conservative and restrictive design parameters for subsea cable installation and use.Due to the complex interaction within a subsea cable structure, such as contact interaction and friction between cable strands, theoretical modelling has been unable to provide reliable stress predictions and therefore an experimental testing regime is required if compression limits within the cable are to be appropriately determined. This paper describes combined axial and bending test arrangements that can be used as a guideline for determination of allowable compression limits for subsea cables.     

Large scale three-dimensional seepage analysis model test and numerical simulation research on undersea tunnel

During the construction process of Qingdao Jiaozhou Bay Undersea Tunnel, the faults and other unfavorable geological discontinuities were often encountered. To study the water inrush mechanism in the faults, both physical model test and numerical analysis were carried out. The results of crown displacement and hydraulic pressure of the monitoring sections in the physical model and numerical model were analyzed in this paper. It was found that the displacement and hydraulic pressure in the process of tunnel construction are often interacted as both cause and effect, and the lower of hydraulic pressure is often accompanied with the growth of its displacement. The changing of the excavation disturbed zone during the excavation in the undersea tunnel was also studied. The results show that the excavation disturbed zone in fault is larger than that in surrounding rock mass, and the excavation disturbance effects in the filling type fault are both transient and persistent. When the displacement and hydraulic pressure in the undersea tunnel change sharply during excavation, there are relatively slow and continuous change trend of the displacement and hydraulic pressure. For practical purposes, to prevent water inrush in the undersea tunnel, more attentions should also be paid to the undersea tunnel after excavation.     

Research of in-situ hydraulic test method by using double packer equipment

Double packer equipment for hydraulic test can be used to measure pressure of test zone directly, and it is frequently used to perform many kinds of hydraulic tests and take groundwater sample from borehole. The test method of this equipment mainly includes the test design, implementation, interpretation and synthetic analysis. By adopting the double packer equipment for hydraulic test, the parameter distribution of rock permeability along borehole can be acquired, as well as the connectivity, water conductivity and water bearing capacity of the disclosed structure and the chemical characteristics of the deep groundwater. It is a necessary method for the research and evaluation of the complex hypotonicity terrace site selection under geological conditions. This method is not only suitable for the geological disposal of high level radioactive waste, but also can be used in the site selection of underground facilities such as storage of petroleum and carbon dioxide. Meanwhile, it has a good application prospect in other hydrogeological investigation fields.