全站仪交汇法在高速公路路面沉降监测中的应用

文章介绍了全站仪交会法沉降监测,方便简洁地解决了测量人员不能进入的高速公路等特殊位置的测量问题,并通过对该方法的精度分析,论证了其可行性和有效性,对以后类似的测量工作提供经验和依据。     

智能全站仪在大型压力容器焊接变形监测中的应用

在大型压力容器的部件焊接过程中,由于预热、焊接等工艺流程会导致各部件产生变形,从而引起部件之间的位置关系产生变化。为保证压力容器成品满足设计要求,必须在制造过程中实施变形监测,依据变形数据适当调整焊接工艺流程,控制变形量。提出采用智能全站仪配以自动变形监测软件对大型压力容器焊接变形进行实时监测,并应用于生产实践中,监测结果表明该方法自动化程度高、实时性好,能同时给出位置和姿态变形数据。     

浙江省连续运行卫星定位服务系统技术设计与试验

区域连续运行卫星定位服务系统可为用户提供包括实时高精度位置信息在内的多功能服务系统,近几年,在国内外得到迅速地发展。浙江省有十万多平方公里的陆地面积,如何在如此大的范围内建设连续运行卫星定位服务系统是本文的主要研究内容。本文在充分分析目前相关技术和设备的基础上,从浙江省的实际情况出发,制定科学合理的系统指标以及建设方案,满足系统的科学建设和正常运行的指导要求,并通过试验进行了验证。     

利用双向缓冲区算法综合海图岛屿

阐述了岛屿综合的内容和原则。介绍了双向缓冲区算法的概念并给出了双向缓冲区算法的定义,研究并证明了双向缓冲区算法的特性。分析了利用双向缓冲区算法综合海图岛屿的原理,并通过实验验证利用双向缓冲区算法综合海图岛屿具有较好的效果。     

数字测图技术在阜新市地理数据库更新中的应用

采用GPS和全站仪联合作业的数字测图方式进行了外业快速数据采集。并利用南方CASS软件对数据进行内业成图工作,最后利用大型的地理信息系统软件ArcGIS进行地理数据的入库,从而实现了阜新市区地理数据库的更新,此方式具有速度快、效率高和精度高等优点,可以借鉴到同类的地区。     

六道湾煤矿塌陷西区地面沉降监测设计方法探讨

介绍乌鲁木齐市六道湾煤矿塌陷区综合治理过程中地面沉降观测站、观测线的设计方法,所需观测内容,观测方法以及所使用观测仪器的精度。在观测站、观测线设计时综合考虑老采空区变形的影响,并针对该区两个不同时段开采变形观测站布设方法分别进行了设计。其中所介绍的设计方法对其它地区类似煤矿塌陷区综合治理有一定意义。     

加固需求度分析在某水电站右岸边坡的应用

边坡工程需要合理确定加固区与非加固区,在施工过程中,要动态调整设计方案。加固需求度方法将影响边坡稳定的主要因素与现场实际的位移监测结果结合起来,依靠专家经验知识,能够得到比较好的结果。在边坡加固需求度的基础上,引入影响权值,对某水电站右岸边坡稳定性进行分析,计算出一段位移监测期内边坡各部分的加固需求程度,得到了比较好的应用。     

GPS-RTK联合全站仪的野外数据采集

对于地形测绘和其它环境条件复杂的地区,用常规方法进行数据采集比较困难,传统的测绘方法越来越不能满足测量效率和成本的要求,但采用GPS RTK与全站仪联合作业,使RTK与全站仪优势互补,在保证测量精度的前提下,可大幅度提高测量速度和效率。     

Treatment of high fluoride concentration wastewater by layered double hydroxides： Mechanism studies

An appropriate concentration of fluoride in drinking water is required to prevent dental cavities, but long-term ingestion of water that contains more than a suitable level of fluoride can cause bone disease and mottling of the teeth. Fluoride ions can be found in wastewater from the fluoride chemical industry, as well as the semiconductor, metal processing, fertilizer, and glass-manufacturing industries. The discharge standard for fluoride in industrial wastewater in China is 10 mg/L. Efficient treatment of fluoride-containing wastewater is therefore of major concern in China, following the rapid development of the fluoride chemical industry. Several methods have been used to remove fluoride from water, such as adsorption, chemical precipitation, electrodialysis, ion exchange and electrochemical processes. Layered double hydroxides （LDHs） are anionic clays with high anion exchange capacities which are effective adsorbents for removal of a variety of anionic pollutants. LDHs have been studied as potential adsorbents for removing toxic anionic species such as CrO4^2-, TcO4^-, SeO3^2-, pesticides, and anionic surfactants from aqueous systems. One of the main attractions of using LDHs for fluoride removal, is that unlike other chemical treatment methods, no chemical sludge should be produced. In the present study, an attempt was made to investigate the mechanism of fluoride removal by LDHs under different conditions using batch methods. In addition, the release of fluoride adsorbed on LDHs by treatment with an aqueous solution of Na2CO3 was studied. The residual fluoride was found to be 10 mg/L in a solution with an initial concentration of 1000 mg/L, which meets the discharge standard for fluoride in industrial wastewater in China.     

Structural Evolvement of Heating Treatment of Mg/AI-LDH and Preparation of Mineral Mesoporous Materials

Although hydrotalcite, or layered double hydroxides （LDHs）, is not a common mineral, it is an important material that can be easily synthesized in laboratory. In this study, structural evolvement and BET surface area changes of heat treated Mg/AI-LDH is evaluated by XRD, TEM and N2-BET analyses. The results indicate that the magnesium-aluminum LDH with carbonate as interlayer anion, periclase-like oxides was formed at temperatures of 400-800℃. Meanwhile, 2-3 nanometer mesoporous were formed during decomposition of LDH. However, the heat treated samples still preserve the morphology of the original LDH plates. Periclase-like formed from LDH heat treatment may re-hydrolyze and recover the structure of LDH. However, crystallinity of the recovered LDH is lower than that of the original LDH. This heat treatment will result in formation of （Mg, Al）-oxide nano-crystals and nanopores among the nano-crystals. When heating temperature exceeds 1000, the periclase-like （Mg, Al）-oxide is transformed into a composite with periclase （MgO） and spinel phases. The periclase can be re-hydrolyzed and dissolved in HCl solution. After acid treatment, the sample with a high surface area is composed of spinel nano-crystals and nanopores among them. Our results will provide a new and economic way to synthesize mesoporous materials through pathways of phase transformation of precursor materials with different composition.