Direct CPT and CPTu methods for determining bearing capacity of helical piles

Helical piles are structural deep foundation elements, which can be categorized as torque-driven piles without any limitations to implement in marine situations. Different methods are used to predict the axial capacity of helical piles, such as static analysis, but have some limitation for this type of piles on marine conditions. In situ testing methods as supplement of static analysis have been rarely used for helical piles. In geotechnical engineering practice, the most common in situ tests particularly applicable for coastal or offshore site investigation are cone penetration test (CPT) and piezocone penetration test (CPTu). The CPT is simple, repeatable, and prepares the continuous records of soil layers. In this paper, a data bank has been compiled by collecting the results of static pile load tests on thirty-seven helical piles in ten different sites including CPT or CPTu data. Axial capacities of thirty-seven helical piles in different sites were predicted by direct CPT methods and static analysis. Accuracy estimation of ten direct CPT methods to predict the axial capacity of helical piles was investigated in this study. Comparisons have been made among predicted values and measured capacity from the pile load tests. Results indicated that the recently developed methods such as NGI-05 (2005), ICP-05 (2005), and UWA-05 (2005) predicted axial capacity of helical piles more accurately than the other methods such as Meyerhof (1983), Schmertmann (1978), Dutch (1979), LCPC (1982), or Unicone (1997). However, more investigations are required to establish better correlation between CPT data and axial capacity of helical piles.     

Experimental analysis of breakwater stability with antifer concrete block

Armor is a pavement made of erosion-resistant materials like a stone or concrete that is constructed to protect breakwater, coasts, and other coastal line features against erosion. These armors are a kind of protective layer made of stone or concrete, used in breakwater constructions or coastal lines, arrayed with specific regular or irregular pattern on the breakwater or the coast. The antifer concrete blocks have almost cubic form, often changed into frustum by adding inclined plates to their sides. One of the most important advantages of these armors is their diversified regular and irregular placement patterns. In this study, using the physical modeling and different tests, the stability level of antifer concrete blocks was evaluated considering the decrease of the armor weight. Results of this study show that by a 10% decrease in the block weight, the failure graph slope is increased and the damage is intensified.     

比较原理在多有理数时滞区间系数离散系统的应用

应用多组有理数时滞离散系统的比较原理和频域法,将多组有理数时滞区间系数离散系统化为多组有理数时滞定常离散系统,以判定其时滞无关稳定性,并举例说明了新定理的有效性和实用性。     

Wave‐induced pore pressure in relation to ocean floor stability of cohesionless soils

One of the important geotechnical considerations for many engineering installations, such as pipelines and anchors, in an oceanic environment involving sand deposits is that of potential ocean floor instability due to the development of high pore pressures caused by the direct action of waves. This article presents a procedure for evaluating the magnitude and distribution of wave‐induced pore pressures in ocean floor deposits. The method takes into account the distribution of wave‐induced pore pressures in ocean floor deposits. The method takes into account the distribution of cyclic shear stresses in the soil profile as well as the important factor of pore‐pressure dissipation. The variation of properties within the soil profile can also be easily incorporated into the analytical procedure. The analysis provides the complete time history of pore‐pressure response and shows clearly that failure to include the pore‐pressure dissipation effects would lead to radically conservative design. The results also provide a basis for designing remedial measures, if required, to avert the development of high pore pressures and their deleterious effects.     

Major Features of Topography,Geology, and Crustal Stability in the Taiwan Strait: A Scientific Approach to the Problem of the Taiwan Strait Tunnel Project

This article discusses briefly the major features of topography, geology, and crustal stability of the possible Taiwan Strait Tunnel Project (TST Project) area. Any one route of the conceived TST Project is larger than either of the English Channel Tunnel or the Seikan submarine Tunnel (Japan) by at least three times in length, and the topographic and geologic conditions are rather more complex and complicated than those of the former two projects. Moreover, the Taiwan Strait is a seismic risk area. Hence, the selection of the route of the submarine tunnel should take advantage of the favorable conditions in the topographic, geologic, seismologic, and other fields to avoid the unfavorable circumstances. At the end of the article, two supposed by comparable routes, especially the south one of TST Project are discussed.     

共转换点道集的抽取与转换波时变静校正

纵横波速度比固定时,同一地震道中各时间采样点对应不同的转换点位置,因此,常规的整体抽道方法只能抽取特定深度或特定层位条件下的共转换点道集,它不能保证所有P-SV转换波的反射点位置都在同一水平位置处。提出了一种精确抽取共转换点道集的新方法,运用这种方法抽取的共转换点道集中所有数据对应的转换点在地面的投影都对应于同一位置,因此,该道集是一种真正意义上的共转换点道集,在此基础上提出了一种解决短波长问题的转换波时变静校正方法,实际资料处理取得了好的效果。     

Chlorophyll production,in response to nutrient additions,by the algae in Lake Taupo water

In batch cultures of Lake Taupo water, phosphorus was the nutrient limiting plant growth from January to June, and nitrogen took over this role from July to December. Chlorophyll production by algae was often stimulated by trace element additions, but it was uncertain whether total cytoplasmic production was also involved.     

海洋重力仪稳定性测试与零点漂移问题

稳定性指标是海洋重力仪最重要的技术特性之一。针对国内对海洋重力仪稳定性测试与评估重视不够、数据处理过程欠规范、技术指标要求欠细化等现实问题,研究探讨了海洋重力仪稳定性测评的技术流程和数据处理方法,重点分析了环境因素和重力固体潮效应对测试结果的影响,提出了重力仪零点趋势性漂移、有色观测噪声与随机误差的分离方法,建立了比较完善的海洋重力仪稳定性评估指标体系,分析论证并进一步明确了重力仪零点漂移非线性变化的限定指标要求,为修订现行海洋重力测量作业标准提供了可靠的理论依据。     

Critical Top Tension for Static Equilibrium Configuration of A Steel Catenary Riser

This paper aims to present the critical top tension for static equilibrium configurations of a steel catenary riser（SCR） by using the finite element method. The critical top tension is the minimum top tension that can maintain the equilibrium of the SCR. If the top tension is smaller than the critical value, the equilibrium of the SCR does not exist. If the top tension is larger than the critical value, there are two possible equilibrium configurations. These two configurations exhibit the nonlinear large displacement. The configuration with the smaller displacement is stable, while the one with larger displacement is unstable. The numerical results show that the increases in the riser＇s vertical distances, horizontal offsets, riser＇s weights, internal flow velocities, and current velocities increase the critical top tensions of the SCR. In addition, the parametric studies are also performed in order to investigate the limit states for the analysis and design of the SCR.     

Modeling stress evolution around a rising salt diapir

We model the evolution of a salt diapir during sedimentation and study how deposition and salt movement affect stresses close to the diapir. We model the salt as a solid visco-plastic material and the sediments as a poro-elastoplastic material, using a generalized Modified Cam Clay model. The salt flows because ongoing sedimentation increases the average density within the overburden sediments, pressurizing the salt. Stresses rotate near a salt diapir, such that the maximum principal stress is perpendicular to the contact with the salt. The minimum principal stress is in the circumferential direction, and drops near the salt. The mean stress increases near the upper parts of the diapir, leading to a porosity that is lower than predicted for uniaxial burial at the same depth. We built this axisymmetric model within the large-strain finite-element program Elfen. Our results highlight the fact that forward modeling can provide a detailed understanding of the stress history of mudrocks close to salt diapirs; such an understanding is critical for predicting stress, porosity, and pore pressure in salt systems.