Numerical calculations in the orbital determination of an artificial satellite for a long arc

Numerical methods are usually used for the computation of ephemerides with perturbations for the precise orbital determination of an artificial satellite. But their numerical stability will be encountered in a long arc. In this case the use the improved Encke special perturbation methods has been suggested. The results of this paper show that Encke's method does indeed have a certain effectiveness, but cannot yet completely resolve the numerical stability, and the more efficient method is to use the energy integral or its variational relation to control the growth of the along-track error in general numerical calculations so that the aim of stabilization can be achieved.     

斜坡提砌石护面厚度的计算

介绍了斜坡式防波堤砌石护面中的插砌条石和干砌块石在波浪作用下的力学图式及作用机理 ,重点给出考虑摩擦力作用时的砌石块体稳定厚度的计算公式 ,并结合工程实例验证了公式的适用性     

A Solution to the Problem of Predicting the Suitability of Silty–clayey Materials for Cement-stabilization

Major geotechnical problems in construction involving silty–clayey soils are due to their low strength, durability and high compressibility of soft soils, and the swell–shrink nature of the overconsolidated swelling soils. Confronted with these problems, a suitable ground improvement technique is needed, for deep excavations in soft clays, for stability, durability and deformation control. Cement-stabilization is one of the alternatives. An increase in strength and durability, reduction in deformability are the main aims of this method. Conventional cement-stabilization methods are used mainly for surface treatment. However, the use of cement has recently been extended to a greater depth in which cement columns were installed to act as a type of soil reinforcement (deep cement–soil mixing and cement jet grouting). In situ engineering properties of these silty–clayey soils are often variable and difficult to predict. For this reason cement-stabilization methods have a basic target to control the aforementioned engineering properties of these clays so that the properties of a silty–clayey soil become more like the properties of a soft rock such as clayey shale or lightly cemented sandstone. So cement-stabilization of these soils is essential to control their engineering properties and to predict their engineering behaviour for construction. In an effort to predict, classify and study the suitability of silty–clayey soils for cement-stabilization both slaking and unconfined compressive strength tests were carried out on clayey–sand mixtures consisted of two types of clays, kaolin and bentonite. Finally diagrams were prepared to study the variation of slaking and strength due to compaction, curing time and cement percentage and also to predict areas of efficient cement-stabilization.     

Evaluation of three waterborne polymers as stabilizers for sandy soil

This study reports on waterborne polymer emulsion systems that were used for structural modification of sandy soils. The first emulsion used was a styrene-acrylic, copolymer emulsion; the second and third were vinyl-acrylic, copolymer-based emulsions. Specimens were prepared by adding different polymer emulsions to the sand and water in prescribed amounts. The performance of the different emulsion systems as sand stabilizers was estimated through measurement of the hydraulic conductivity and compressive strength. Measurements of hydraulic conductivity were conducted in a flexible membrane test apparatus. The hydraulic conductivity for the three emulsions decreased at different rates, with an increase in polymer content up to 3 wt. (i.e., % by weight). Additional increase of polymer content did not introduce significant decrease in hydraulic conductivity, and, at 5 wt.%, the three emulsions had essentially the same effect. Measurements made on dry cylindrical specimens disclosed remarkable enhancement in the mechanical behavior of the system. The compressive strength and modulus of elasticity of the examined emulsions increased with a higher concentration of polymer. Scanning electron microscope (SEM) revealed that the reduction in the permeability and the improved mechanical properties can be attributed to three dominant structural changes: the development of interconnecting ties between the sand particles, the development of adhesion between neighboring sand particles in contact, and the covering of the sand particles with a thin polymer film.     

岩体断层基础加固与溶洞灌浆处理中的高压灌浆技术

阐述了在岩体断层加固和溶洞处理中的高压灌浆技术,分析了高压灌浆的作用机理,灌浆压力控制的方法,介绍了高压灌浆在水利枢纽工程上的应用效果。     

多年冻土地区建筑物地基的热稳定性技术

Thermal stabilization of soils (including freezing of thawed soils and cooling of permafrost) is known to be the effective method providing stable support for buildings and structures in cold regions.Seasonal thermo-stabilizers (STS) are mainly used in construction. The predicted climate warming because of natural and man-caused factors determines wide application of STS in permafrost regions. A STS transfers heat from its underground part (evaporator) to the aerial part (condenser) owing to natural temperature difference between them during a cold season. We have been working out and manufacturing different types of two-phase, vapor-liquid STS. Aluminum alloys are used in our STS to prevent corrosion and to increase their efficiency. They are successfully used in the northern regions of Western Siberia, in particular, at the railway Obskaya Bovanenkovo. The paper presents some technical parameters of new STS, the results of their experimental study and computer simulation, as well as experience features.     

Stabilization of swelling clays by Mg(OH)2. Changes in clay properties after addition of Mg-hydroxide

Stabilization of the swelling clay structure is attempted by intercalation of Mg(OH)₂ and the development of a brucite interlayer between the clay layers. The properties of the product obtained by applying the technique, formulated as described in a previous work, are considered here. The materials used were Wyoming bentonite (USA), Fuller's Earth (UK), kaolinite, illite, lignite, and silica gels. The Mg(OH)₂-clay products were examined by the methylene blue dye test, X-ray diffraction analysis (XRD), differential thermal analysis (DTA), and derivative thermogravimetry analysis (DTGA). From the results obtained it is concluded that: the Mg-hydroxide is adsorbed by swelling clays both on their external and internal surface, whereas it is adsorbed on the external surface by non-swelling clays. The internally adsorbed phase of Mg-hydroxide forms an ill-defined interlayer of brucite, retarding swelling, whereas the external phase covers the particles modifying drastically their surface properties, like the adsorption of the MB dye. The material produced after precipitation of Mg-hydroxide on swelling clays (smectites) did not re-expand on wetting or after glycolation. The adsorption of MB dye was also reduced by some 80–90%, due to coating effect, preventing the measurements of the external surface area of the clay by polar molecules. The principal forces involved in the process are believed to be physical adsorption on the external surface, along with chemisorption and some chemical bonding, mostly in the internal surface. Cementation due to crystallization and, in the long term, some pozzolanic reactions take also place. Internal adsorption of the Mg-hydroxide is postulated to be in the form of positively charged mono- and/or small polymers and it is, chiefly, diffusion controlled. Since Mg-hydroxide is internally adsorbed by swelling clays, whereas Ca-hydroxide(lime) is not, and the (Mg, Ca)-clay aggregates are more stable than the Ca-clay or the Mg-one, the combination of the two hydroxides could give better results in soil stabilization than each hydroxide alone.     

基于LabwindowsCVI的外腔半导体激光器数字稳频系统设计

为抑制外腔半导体激光器频率漂移,提高频率稳定性,提出一种数字稳频方法。该方法采用数据采集卡,基于LabwindowsCVI语言实现数字锁相放大模块获得稳频误差信号,通过此信号控制压电陶瓷电压,将852 nm外腔半导体激光器的频率锁在铯原子谱线上,实现20 s频率稳定度8.7×10-11。该数字稳频方法降低了人力成本,易升级和修改,具有移植性好和用户界面友好等优点。     

Low-order stabilized finite element for the full Biot formulation in soil mechanics at finite strain

This article presents a novel finite element formulation for the Biot equation using low-order elements. Additionally, an extra degree of freedom is introduced to treat the volumetric locking steaming from the effective response of the medium; its balance equation is also stabilized. The accuracy of the proposed formulation is demonstrated by means of numerical analyses.     

顾及像面畸变的卫星视频稳像

卫星视频每帧影像外方位元素数值存在差别,相邻帧影像间的同名点在像面位置不同,且由于每帧影像均存在几何畸变,经典的帧间的投影变换模型、仿射变换模型等视频稳像的配准模型不能精确描述帧间的同名点关系。针对该问题,本文提出顾及像面畸变的卫星视频稳像算法,基于仿真的卫星视频,验证了该算法的可行性和精度。