松嫩平原西部沼泽湿地景观格局动态变化研究

湿地退化及其所带来的负面影响使人们认识到湿地生态系统生态功能的重要性.因此,作为功能研究基础的景观格局及其动态变化的研究显得尤为重要.在遥感和地理信息系统技术支持下,运用土地利用变化指数和景观格局指数模型,对处于生态脆弱区的松嫩平原西部沼泽湿地景观格局及动态变化进行了定量研究,结果表明:松嫩平原西部沼泽景观格局发生了显著变化.松嫩平原西部现有沼泽湿地面积4 488.13 km2,近50年来减少了62.54%;2000年斑块密度为1954年的1.67倍,且最大斑块面积和最大斑块周长均减小,说明沼泽景观破碎化严重;松嫩平原西部沼泽湿地分布质心发生偏移,近50年,向西北方向偏移了19.4 km,主轴方向顺时针旋转了9.23o,表明了沼泽湿地景观具有破碎化和萎缩的趋势,并且呈现出不平衡性:湿地的萎缩程度偏重于研究区的东南部;得出松嫩平原西部沼泽湿地减少及生态环境恶化主要是由该区生态环境原生脆弱性和人类不合理的开发利用方式导致的.通过景观格局变化的研究为沼泽湿地格局优化和生物保护提供参考.     

Interactive effects of the type of milling media and CuSO4 addition on the flotation performance of sulphide minerals from Merensky ore Part II: Froth stability

The limitations of pulp chemistry measurements in the flotation of a platinum group mineral (PGM) bearing Merensky ore were demonstrated in Part 1 of this article. In this paper the importance of the contribution of the froth structure due to changing froth stability is analysed using the batch flotation data. The effects of mild steel (MS) and stainless steel (SS) milling media and the addition of copper sulphate on the flotation performance of the sulphide minerals in Merensky ore have been evaluated in relation to the changes in stability of the froth phase. The effects of pulp chemistry and froth stability on the flotation of sulphide minerals were distinguished by using two different rate constants (k_t and k_w). The rate constant (k_w) calculated as a function of cumulative water recovery was used to describe characteristics of froth phase and k_t was calculated as a function of flotation time. The results revealed that the type of grinding media and copper sulphate addition had an interactive effect on the froth stability. While mild steel (MS) milling increased the froth stability due to the presence of hydrophilic iron hydroxides and colloidal metallic iron, the addition of copper sulphate reduced the stability, especially with stainless steel (SS) milling. Copper sulphate addition had a dual role in the flotation of Merensky ore in that it caused destabilisation of the froth zone as well as activation of selected sulphide minerals. The dominant effect was found to depend on the type of milling media and floatability of the mineral in question and this work has demonstrated the importance of using a combination of measurements to evaluate flotation performance holistically.     

Strength and stability of frictional sliding of gabbro gouge at elevated temperatures

To investigate the strength of frictional sliding and stability of mafic lower crust, we conducted experiments on oven-dried gabbro gouge of 1 mm thick sandwiched between country rock pieces (with gouge inclined 35° to the sample axis) at slip rates of 1.22 × 10^− 3 mm/s and 1.22 × 10^− 4 mm/s and elevated temperatures up to 615 °C. Special attention has been paid to whether transition from velocity weakening to velocity strengthening occurs due to the elevation of temperature.Two series of experiments were conducted with normal stresses of 200 MPa and 300 MPa, respectively. For both normal stresses, the friction strengths are comparable at least up to 510 °C, with no significant weakening effect of increasing temperature. Comparison of our results with Byerlee's rule on a strike slip fault with a specific temperature profile in the Zhangbei region of North China shows that the strength given by experiments are around that given by Byerlee's rule and a little greater in the high temperature range.At 200 MPa normal stress, the steady-state rate dependence a − b shows only positive values, probably still in the “run-in” process where velocity strengthening is a common feature. With a normal stress of 300 MPa, the values of steady-state rate dependence decreases systematically with increasing temperature, and stick-slip occurred at 615 °C. Considering the limited displacement, limited normal stress applied and the effect of normal stress for the temperatures above 420 °C, it is inferred here that velocity weakening may be the typical behaviour at higher normal stress for temperature above 420 °C and at least up to 615 °C, which covers most of the temperature range in the lower crust of geologically stable continental interior. For a dry mafic lower crust in cool continental interiors where frictional sliding prevails over plastic flow, unstable slip nucleation may occur to generate earthquakes.     

The petroleum generation potential and effective oil window of humic coals related to coal composition and age

A worldwide data set of more than 500 humic coals from the major coal-forming geological periods has been used to analyse the evolution in the remaining (Hydrogen Index, HI) and total (Quality Index, QI) generation potentials with increasing thermal maturity and the ‘effective oil window’ (‘oil expulsion window’). All samples describe HI and QI bands that are broad at low maturities and that gradually narrow with increasing maturity. The oil generation potential is completely exhausted at a vitrinite reflectance of 2.0–2.2%R_o or T_max of 500–510 °C. The initial large variation in the generation potential is related to the original depositional conditions, particularly the degree of marine influence and the formation of hydrogen-enriched vitrinite, as suggested by increased sulphur and hydrogen contents. During initial thermal maturation the HI increases to a maximum value, HI_max. Similarly, QI increases to a maximum value, QI_max. This increase in HI and QI is related to the formation of an additional generation potential in the coal structure. The decline in QI with further maturation is indicating onset of initial oil expulsion, which precedes efficient expulsion. Liquid petroleum generation from humic coals is thus a complex, three-phase process: (i) onset of petroleum generation, (ii) petroleum build-up in the coal, and (iii) initial oil expulsion followed by efficient oil expulsion (corresponding to the effective oil window). Efficient oil expulsion is indicated by a decline in the Bitumen Index (BI) when plotted against vitrinite reflectance or T_max. This means that in humic coals the vitrinite reflectance or T_max values at which onset of petroleum generation occurs cannot be used to establish the start of the effective oil window. The start of the effective oil window occurs within the vitrinite reflectance range 0.85–1.05%R_o or T_max range 440–455 °C and the oil window extends to 1.5–2.0%R_o or 470–510 °C. For general use, an effective oil window is proposed to occur from 0.85 to 1.7%R_o or from 440 to 490 °C. Specific ranges for HI_max and the effective oil window can be defined for Cenozoic, Jurassic, Permian, and Carboniferous coals. Cenozoic coals reach the highest HI_max values (220–370 mg HC/g TOC), and for the most oil-prone Cenozoic coals the effective oil window may possibly range from 0.65 to 2.0%R_o or 430 to 510 °C. In contrast, the most oil-prone Jurassic, Permian and Carboniferous coals reach the expulsion threshold at a vitrinite reflectance of 0.85–0.9%R_o or T_max of 440–445 °C.     

大变形有限元法分析边坡稳定性

边坡稳定性分析的重要任务是确定边坡潜在滑面的位置及相应的安全系数,鉴于坡体位移可在现场监测中直接得到,提出边坡潜在滑面确定的位移判据,采用大变形有限元首先计算出边坡的位移场,然后在开挖面的不同高度作塑性区内的水平位移参考线,依次连接参考线上的位移突变点即得到边坡失稳的潜在滑面位置,分析滑面上的应力以及岩体抗剪强度即得到边坡的整体安全系数。     

双坡面临空岩质边坡滑动破坏模式下的稳定性分析

多数岩质边坡稳定性分析已基本解决了常走向单坡面临空的边坡平面滑动问题。然而,在路堑边坡工程和自然边坡中有很多边坡坡面并不是平面,它包含多个坡面。多坡面边坡包含两个或多个不同走向的坡面。多坡面边坡几何特征不同于单坡面边坡,所以滑动条件也不一样。在赤平投影图上,多坡面的滑动包络线是组成边坡的每个坡面单独投影包络线的组合。为了探讨方便,只讨论了双坡面临空岩质边坡的滑动破坏模式,并将其分为双坡面临空下的平面破坏和楔形体破坏。在赤平投影图上,双坡面滑动区域定义为双坡面边坡滑动包络图中两侧坡面的真倾线之间的面积。如果有一两个节理面真倾向线落在滑动区内,滑动破坏才可能发生。     

Origin and three-dimensional fluorescence spectrum of the chromophoric dissolved organic matter in Yangtze estuary, East China

Dissolved organic matter （DOM） is an important chemical component in natural water. Chromophoric dissolved organic matter （CDOM）, a fraction of optical properties, plays art important role in the biogeochemical cycle of nutrients in aquatic environment. People realized that DOM cycle is crucial in the global carbon and nitrogen flux, and also is inherently related to nutrients and trace metal elements. Therefore, CDOM was concerned by scientists in global oceanography and limnology fields. Water samples were collected from three sections （North Channel, South Channel and Zhuyuan） of the Yangtze （Changjiang River） estuary in March 2006 Three-dimensional excitation emission matrix （3-DEEM） fluorescence spectra were analyzed for those filtrates through Whatman GF/F filters. Dissolved organic carbon （DOC） was also measured by TOC analyzer. The tidal variety was also taken into account. The 3-D EEM fluorescence scans suggested the fluorescence characteristics of humic acid （Ex=332-344 nm, Em=439-451 nm） and fulvic acid （Ex=250-254 nm, Em=472-478 nm） were obvious, and the fluorescence group of protein-like and tyrosine （Ex=230 nm, Em=283 nm） was also found. They are mainly composed of CDOM in the Yangtze estuary. Further data analysis, especially the fluorescence index （f 450/500）, showed that terrestrial signal was rather strong （1.41-1.65） in the surface water, however, some terrestrial CDOM signals of bottom water showed excursions （1.28-1.39）. On the other hand, anthropogenic sign was impressed in the waters of Zhuyuan, which is one of the main drain outlets of Shanghai Metropolis. DOC concentrations ranged from 2.2 mg/L to 3.4 mg/L in Zhuyuan and South Channel, and from 2.0 mg/L to 2.4 mg/L in North Channel. The tide effect played a role in the composition of the CDOM measured by 3-D fluorescence scan technology.     

Heavy metals in freshly deposited sediments of the river Subernarekha, India: an example of lithogenic and anthropogenic effects

Heavy metal distribution patterns in river sediments aid in understanding the exogenic cycling of elements as well as in assessing the effect of anthropogenic influences. In India, the Subernarekha river flows over the Precambrian terrain of the Singhbhum craton in eastern India. The rocks are of an iron ore series and the primary rock types are schist and quartzite. One main tributary, the Kharkhai, flows through granite rocks and subsequently flows through the schist and quartzite layers. The Subernarekha flows through the East Singhbhum district, which is one of India’s industrialised areas known for ore mining, steel production, power generation, cement production and other related activities. Freshly deposited river sediments were collected upstream and downstream the industrial zone. Samples were collected from four locations and analysed in <63-μm sediment fraction for heavy metals including Zn, Pb, Cd and Cu by anodic stripping voltammetry. Enrichment of these elements over and above the local natural concentration level has been calculated and reported. Sediments of the present study are classified by Muller’s geo-accumulation index (I _geo) and vary from element to element and with climatic seasons. During pre-monsoon period the maximum I _geo value for Zn is moderately to highly polluted and for Cu and Pb is moderately polluted, respectively, based on the Muller’s standard. Anthropogenic, lithogenic or cumulative effects of both components are the main reasons for such variations in I _geo values. The basic igneous rock layer through which the river flows or a seasonal rivulet that joins with the main river may be the primary source for lithogenic components.     

A Connectivity Index for Discrete Fracture Networks

Connectivity is an important measure for assessing flow transport in rock, especially through fractures. In this paper, rock fracture systems are modelled by a discrete fracture model simulated by a marked point process. A connectivity index is then introduced to quantify the connectivity between any two points in space. Monte Carlo simulation is used to evaluate the connectivity index for stationary cases and relationships between the connectivity index and the parameters of the discrete fracture model are analysed. The average number of intersections per fracture, X_f, and the fracture intensity, P12 (P32), are calculated and the relationships between these parameters and the connectivity index are investigated, concluding that X_f is the more suitable parameter for the classification of rock mass flow properties. The relationships between the connectivity index and the percolation state of the fractured medium are also discussed. An edge correction is briefly discussed and a practical example is used to demonstrate the method of computing the connectivity index.     

山丘平原过渡区土壤重金属污染特征及评价——以四川省五通桥区为例

采集和分析了五通桥区不同功能区和乡镇73个土壤样品，以了解山丘平原过渡区土壤重金属的含量和污染特征。结果表明，重金属的平均含量为Pb32．18mg／kg、Cd0．82mg／kg、Cu28．61mg／kg、Zn108．08mg／kg、Ni32．66mg／kg、Cr72．44mg／kg；与四川土壤背景值相比，Cu、Ni、Cr的含量与之持平，Pb增加了0．11倍，Zn增加了0．32倍，Cd的积累较为严重，比背景值增加了10倍。污染评价结果显示该过渡区存在一定程度的重金属污染问题，不同功能区的污染程度排序为工业区〉生活区〉农业区。Cd在六种元素的土壤污染分担率中占55．46％，是最主要的污染元素；土壤Cd含量与Pb和Zn存在较高的相关性（相关系数为0．525和0．500），表明存在Pb—Cd和Zn—Cd的复合污染。