Fluid sources for the La Guitarra epithermal deposit (Temascaltepec district, Mexico): Volatile and helium isotope analyses in fluid inclusions

The La Guitarra deposit (Temascaltepec district, South-Central Mexico), belongs to the low/intermediate sulfidation epithermal type, has a polymetallic character although it is currently being mined for Ag and Au. The mineralization shows a polyphasic character and formed through several stages and sub-stages (named I, IIA, IIB, IIC, IID, and III). The previous structural, mineralogical, fluid inclusion and stable isotope studies were used to constrain the selection of samples for volatile and helium isotope analyses portrayed in this study. The N₂/Ar overall range obtained from analytical runs on fluid inclusion volatiles, by means of Quadrupole Mass Spectrometry (QMS), is 0 to 2526, and it ranges 0 to 2526 for stage I, 0 to 1264 for stage IIA, 0 to 1369 for stage IIB, 11 to 2401 for stage IIC, 19 to 324 for stage IID, and 0 to 2526 for stage III. These values, combined with the CO₂/CH₄ ratios, and N₂-He-Ar and N₂-CH₄-Ar relationships, suggest the occurrence of fluids from magmatic, crustal, and shallow meteoric sources in the forming epithermal vein deposit. The helium isotope analyses, obtained by means of Noble Gas Mass Spectrometry, display R/Ra average values between 0.5 and 2, pointing to the occurrence of mantle-derived helium that was relatively diluted or “contaminated” by crustal helium. These volatile analyses, when correlated with the stable isotope data from previous works and He isotope data, show the same distribution of data concerning sources for mineralizing fluids, especially those corresponding to magmatic and crustal sources. Thus, the overall geochemical data from mineralizing fluids are revealed as intrinsically consistent when compared to each other.The three main sources for mineralizing fluids (magmatic, and both deep and shallow meteoric fluids) are accountable at any scale, from stages of mineralization down to specific mineral associations. The volatile and helium isotope data obtained in this paper suggest that the precious metal-bearing mineral associations formed after hydrothermal pulses of predominantly oxidized magmatic fluids, and thus it is likely that precious metals were carried by fluids with such origin. Minerals from base-metal sulfide associations record both crustal and magmatic sources for mineralizing fluids, thus suggesting that base metals could be derived from deep leaching of crustal rocks. At the La Guitarra epithermal deposit there is no evidence for an evolution of mineralizing fluids towards any dominant source. Rather than that, volatile analyses in fluid inclusions suggest that this deposit formed as a pulsing hydrothermal system where each pulse or set of pulses accounts for different compositions of mineralizing fluids.The positive correlation between the relative content of magmatic fluids (high N₂/Ar ratios) and H₂S suggests that the necessary sulfur to carry mostly gold as bisulfide complexes came essentially from magmatic sources. Chlorine necessary to carry silver and base metals was found to be abundant in inclusion fluids and although there is no evidence about its source, it is plausible that it may come from magmatic sources as well.     

Memories of Fire: Eduardo Galeano and the Geography of Guatemala

In Memory of Fire, a poetic narration of the history of the Americas from pre-Columbian times to the late 20th century, Eduardo Galeano furnishes readers with over 1200 of his trademark vignettes, some 35 of which pertain to Guatemala. Galeano evokes disparate aspects of the geography of Guatemala, past and present, in grounded miniatures of time, place, and episode. His sketches of the experiences of Maya peoples allow us to see them as survivors of three cycles of conquest: (1) conquest by imperial Spain; (2) conquest by local and international capitalism; and (3) conquest by state terror. Composed in the literary mode of creative non-fiction, Memory of Fire serves as an inspirational classroom text, exposing students not only to factual detail but also a powerful artistic imagination.     

Fracture analysis in the south-western Corinth rift (Greece) and implications on fault hydraulic behavior

This paper reviews the data concerning the fracture network and the hydraulic characteristics of faults in an active zone of the Gulf of Corinth. Pressure gap measured through fault planes shows that in this area the active normal faults (Aigion, Helike) act, at least temporarily and locally, as transversal seal. The analysis of the carbonate cements in the fractures on both the hangingwall and the footwall of the faults also suggests that they have acted as local seals during the whole fault zone evolution. However, the pressure and the characteristics of the water samples measured in the wells indicate that meteoric water circulates from the highest part of the relief to the coast, which means it goes through the fault zones. Field quantitative analysis and core studies from the AIG-10 well have been performed to define both regional and fault-related fracture networks. Then laboratory thin section observations have been done to recognize the different fault rocks characterizing the fault zone components. These two kinds of approach give information on the permeability characteristics of the fault zone. To synthesize the data, a schematic conceptual 3D fluid flow modeling has been performed taking into account fault zone permeability architecture, sedimentation, fluid flow, fault vertical offset and meteoric water influx, as well as compaction water flow. This modeling allows us to fit all the data with a model where the fault segments act as a seal whereas the relays between these segments allow for the regional flow from the Peloponnese topographic highs to the coast.     

Increasing critical sensitivity of the Load/Unload Response Ratio before large earthquakes with identified stress accumulation pattern

The Load/Unload Response Ratio (LURR) method is proposed for short-to-intermediate-term earthquake prediction [Yin, X.C., Chen, X.Z., Song, Z.P., Yin, C., 1995. A New Approach to Earthquake Prediction — The Load/Unload Response Ratio (LURR) Theory, Pure Appl. Geophys., 145, 701–715]. This method is based on measuring the ratio between Benioff strains released during the time periods of loading and unloading, corresponding to the Coulomb Failure Stress change induced by Earth tides on optimally oriented faults. According to the method, the LURR time series usually climb to an anomalously high peak prior to occurrence of a large earthquake. Previous studies have indicated that the size of critical seismogenic region selected for LURR measurements has great influence on the evaluation of LURR. In this study, we replace the circular region usually adopted in LURR practice with an area within which the tectonic stress change would mostly affect the Coulomb stress on a potential seismogenic fault of a future event. The Coulomb stress change before a hypothetical earthquake is calculated based on a simple back-slip dislocation model of the event. This new algorithm, by combining the LURR method with our choice of identified area with increased Coulomb stress, is devised to improve the sensitivity of LURR to measure criticality of stress accumulation before a large earthquake. Retrospective tests of this algorithm on four large earthquakes occurred in California over the last two decades show remarkable enhancement of the LURR precursory anomalies. For some strong events of lesser magnitudes occurred in the same neighborhoods and during the same time periods, significant anomalies are found if circular areas are used, and are not found if increased Coulomb stress areas are used for LURR data selection. The unique feature of this algorithm may provide stronger constraints on forecasts of the size and location of future large events.     

Hydrometallurgical processing and recovery of molybdenum trioxide from spent catalyst

Hydrometallurgical processing of spent hydrodesulphurisation (HDS) catalyst for the recovery of molybdenum using sodium carbonate and hydrogen peroxide mixtures was investigated. The results indicated that the recovery of molybdenum was largely dependent on the concentrations of Na₂CO₃ and H₂O₂ in the reaction medium, which controls the acidity of the leach liquor and carry over of impurities such as Al, Ni, P, Si and V. Leaching process was exothermic and leaching efficiency of molybdenum decreased with increasing solid to liquid ratio. Large scale leaching of spent catalyst, under optimum conditions: 20% pulp density, 85 g/L Na₂CO₃, 10 vol.% H₂O₂ and 1 h reaction, resulted a leaching efficiency of 84% Mo. The obtained leach liquor contained (g/L): Mo — 22.0, Ni — 0.015 and Al — 0.82, P — 1.1, Si — 0.094 and minor quantities of V — 8 mg/L, As and Co — < 1 mg/L. Recovery of Mo from leach solution as MoO₃ of 97.30% purity was achieved by ammonium molybdate precipitation method.     

Subsurface thermal and hydrothermal characterization based on geothermal resources map, drill hole thermal gradients, Curie point depths and hypocenter distribution — Examples of Tohoku district, Japan

Subsurface thermal structure in Tohoku district are characterized by existing data such as geothermal resources maps, drill hole thermal gradients, Curie point depths and hypocenters distribution maps. The collected data are registered in a database system, then, compared in plan view, cross-section and bird's-eye pictures. The comparison indicates that subsurface temperatures extrapolated from drill hole thermal gradients are generally concordant to the Curie point depth, assumed to be 650 °C. Tohoku district is generally divided into 5 type areas; fore arc lowland, fore arc mountain country, Quaternary volcanic terrain, back arc lowland and back arc mountain country. The surface thermal manifestations in Quaternary volcanic terrain are mainly controlled by the magma chambers as heat sources, while, surface thermal features such as hot springs in non-volcanic areas are controlled by degrees of heat flows, and hydrothermal flows in permeable Cenozoic formations and along permeable fault zones.     

High-resolution sedimentary record of lead in the coastal mud of the East China Sea in the past one hundred and fifty years

In the East China Sea （ECS）, there are some mud areas, including the south coastal mud area, the north coastal mud area, and the mud area to the southwest of Cheju Island. X-ray fluorescence （XRF） techniques and Thermal Ionization Mass Spectrometry （TIMS） were used to study the high-resolution sedimentary record of Pb concentrations and Pb stable isotopic compositions in the past one hundred and fifty years in the coastal mud of the ECS. Pb concentrations of a ^210Pb dating S5 core in the study area have increased rapidly since 1980, and reached the maximal value with 65.08 μg/g in 2000, corresponding to the fast economic development of China since the implementation of the ＂Reform and Open Policy＂ in 1978; ^206Pb/^207Pb ratios generally had stabilized at 1.195 from 1860 to 1966, and decreased gradually from 1966 to 2000, indicating that the anthropogenic source Pb contribution to the ECS has increased gradually since 1966, especially since 1980. Pb concentrations decreased distinctly from 2000 to 2003 and ^206Pb/^207Pb ratios increased from 2001 to 2003, corresponding closely to the ban of lead gasoline from 2000 in China. From 1950 to 2003, there occurred four distinct decrease events of ^206Pb/^207Pb, possibly responding to the Changjiang River （Yangtze River） catastrophic floods in 1998, 1991, 1981 and 1954; from 1860 to 1966, there were two decrease periods of ^206Pb/^207Pb, which may respond to the catastrophic floods of Changjiang River in 1931 and 1935, and 1870. As a result of the erosion and drowning by the catastrophic floods, the anthropogenic lead accumulated in soil and water environments over a long period of time was brought into the Changjiang River, then part of them was finally transported into the ECS, which leads to changes in Pb stable isotopic composition.     

The ＂CO2-rich gas vents＂ of Mt. Amiata volcano （Tuscany, Central Italy）： Geochemistry,genetic mechanism and hazard evaluation

Mt. Amiata （Southern Tuscany, Central Italy） is an extinct Quaternary volcano located in an area still marked by high heat-flow that is caused by deep seated （6-10 km） hot masses related to Pliocene magmatic activity. The anomalous geothermal gradient gives rise, within the Mesozoic limestone formation （Tuscan series）, to geothermal systems that fed the Ca-SO4 thermal springs characterizing this area. Besides of thermal fluids, several cold, dry CO2-rich gas emissions seep out on the NE flank of the volcano. These gas vents mostly consist of large sub-circular craters at variable depth and diameter （5-15 m and 10-50 m, respectively）, and represent a serious hazard for the local population, as testified by the several asphyxia casualties that have been repeatedly occurred within these morphological depressions. In this work, the chemical and isotopic compositions of the Mt. Amiata ＂CO2-rich gas vents＂ and the estimation of both the CO2 flux from the soil and the CO2 distribution in air of their surroundings, has been carried out in order to： （1） assess the origin of gases, （2） recognize the mechanism of formation for these gas emissions and their relationship with local tectonics, and （3） to evaluate the CO2 hazard in the high flux emanations. The chemical composition of the gases is largely dominated by CO2 （up to 98 % by vol） and shows relatively high concentrations of N2, CH4 and H2S （up to 1.1%, 0.9% and 3.9 % by vol, respectively）. These features, coupled with the carbon and nitrogen isotopic signatures, suggest that the origin of the main gas compounds may be related to the contribution of deep （i.e., thermometamorphic processes on carbonate formations for CO2） and shallow （i.e. thermal decomposition of organic material for CH4, N2 and H2S） sources.     

The bimodal rift-related Juscelândia volcanosedimentary sequence in central Brazil: Mesoproterozoic extension and Neoproterozoic metamorphism

The Barro Alto Complex and Juscelândia volcanosedimentary sequence are exposed in the central part of the Neoproterozoic Brasília belt of central Brazil. The former is a large (approximately 150 km long), boomerang-shaped, mafic-ultramafic, layered complex formed by two different intrusions metamorphosed under granulite facies. These rocks are tectonically overlain by rocks of the Juscelândia volcanosedimentary sequence, represented mainly by biotite-gneiss and amphibolite, or amphibolite facies metamorphic equivalents of rhyolite and basalt, respectively. New SIMS U–Pb zircon data and Sm–Nd isochron data presented herein help clarify the igneous and metamorphic evolution of the Juscelândia volcanosedimentary sequence, as well as its relationship with the Barro Alto Complex. Zircon grains from two biotite gneisses were analyzed by SIMS (SHRIMP) and indicate Mesoproterozoic dates, approximately 1.28 Ga, interpreted as the time of bimodal volcanism in a tectonic setting transitional between a continental rift and an ocean basin. Metamorphism is constrained by Sm–Nd garnet-whole-rock isochrons for garnet amphibolite and pelitic schists of the Juscelândia sequence, as well as for clinopyroxene-garnet amphibolite and garnet granulite of the Barro Alto Complex, which give ages between 0.74 and 0.76 Ga, in agreement with SIMS dates for metamorphic zircon rims. These new data are significant, because they establish that a single metamorphic event affected both the Barro Alto Complex and the Juscelândia sequence. Based on these new data, we present a modified tectonic model for the Brasília belt.     

Carbonates calibrated against oceanographic parameters along a latitudinal transect in the Gulf of California, Mexico

Trophic resources are an important control governing carbonate production. Though this importance has long been recognized, no calibration exists to quantitatively compare biogenic assemblages within trophic resource fields. This study presents a field calibration of carbonate producers in a range of settings against high‐resolution in situ measurements of nutrients, temperature and salinity. With its latitudinal extent from 30° to 23° N, the Gulf of California, Mexico, spans the warm‐temperate realm and encompasses nutrient regimes from oligo‐mesotrophic in the south to eutrophic in the north. Accordingly, from south to north carbonates are characterized by: (i) coral‐dominated shallow carbonate factories (5–20 m water depth) with average sea‐surface temperatures of 25 °C (min. 18 °C, max. 31 °C), average salinities of 35·06‰ and average chlorophyll a levels, which are a proxy for nutrients, of 0·25 mg Chl a m^?3 (max. 0·48, min. 0·1). (ii) Red algal‐dominated subtidal to inner‐shelf carbonate formation (10–25 m) in the central Gulf of California exhibiting average temperatures of 23 °C (min. 18 °C, max. 30 °C), average salinities of 35·25‰, and average Chl a levels of 0·71 Chl a m^?3 (max. 5·62, min. 0). (iii) Molluskan bryozoan‐rich inner to outer shelf factories in the northern Gulf of California (20–50 m) with average sea surface temperatures of only 20 °C (min. 13 °C, max 29 °C), average salinities of 35·01‰, and average contents of 2·2 mg Chl a m^?3 (max. 8·38, min. 0). By calibrating sedimentological data with in situ measured oceanographic information in different environments, the response of carbonate producers to environmental parameters was established and extrapolated to carbonates on a global scale. The results demonstrate the importance of recognizing and quantifying trophic resources as a dominant control determining the biogenic composition and facies character of both modern and fossil carbonates.