应用探地雷达探测活动断层

在浅覆盖区采用探地雷达探测地震活动断层。通过实验确定出最佳的采集参数和数据处理流程,在雷达剖面上,能够清晰地显示出断层上部的形态特征、上断点埋深和岩土分层。结合钻孔资料,利用雷达剖面上对第四系覆盖的分层结果和上断点所在的层位可以分析和评价断层的活动性。     

A geochronological approach to understanding the role of solar activity on Holocene glacier length variability in the Swiss Alps

We present a radiocarbon data set of 71 samples of wood and peat material that melted out or sheared out from underneath eight presentday mid‐latitude glaciers in the Central Swiss Alps. Results indicated that in the past several glaciers have been repeatedly less extensive than they were in the 1990s. The periods when glaciers had a smaller volume and shorter length persisted between 320 and 2500 years. This data set provides greater insight into glacier variability than previously possible, especially for the early and middle Holocene. The radiocarbon‐dated periods defined with less extensive glaciers coincide with periods of reduced radio‐production, pointing to a connection between solar activity and glacier melting processes. Measured long‐term series of glacier length variations show significant correlation with the total solar irradiance. Incoming solar irradiance and changing albedo can account for a direct forcing of the glacier mass balances. Long‐term investigations of atmospheric processes that are in interaction with changing solar activity are needed in order to understand the feedback mechanisms with glacier mass balances.     

Retrieval of stratospheric O3 and NO2 vertical profiles using zenith scattered light observations

Daily zenith scattered light intensity observations were carried out in the morning twilight hours using home-made UV-visible spectrometer over the tropical station Pune (18‡31′, 73‡51′) for the years 2000–2003. These observations are obtained in the spectral range 462–498 nm for the solar zenith angles (SZAs) varying from 87‡ to 91.5‡. An algorithm has been developed to retrieve vertical profiles of ozone (O₃) and nitrogen dioxide (NO₂) from ground-based measurements using the Chahine iteration method. This retrieval method has been checked using measured and recalculated slant column densities (SCDs) and they are found to be well matching. O₃ and NO₂ vertical profiles have been retrieved using a set of their air mass factors (AMFs) and SCDs measured over a range of 87–91.5‡ SZA during the morning. The vertical profiles obtained by this method are compared with Umkehr profiles and ozonesondes and they are found to be in good agreement. The bulk of the column density is found near layer 20–25 km. Daily total column densities (TCDs) of O₃ and NO₂ along with their stratospheric and tropospheric counterparts are derived using their vertical profiles for the period 2000–2003. The total column, stratospheric column and tropospheric column amounts of both trace gases are found to be maximum in summer and minimum in the winter season. Increasing trend is found in column density of NO₂ in stratospheric, tropospheric and surface layers, but no trend is observed in O₃ columns for above layers during the period 2000–2003     

Multi‐objective optimal design of FLC driven hybrid mass damper for seismically excited structures

Structural vibration control using active or passive control strategy is a viable technology for enhancing structural functionality and safety against natural hazards such as strong earthquakes and high wind gusts. Both the active and passive control systems have their limitations. The passive control system has limited capability to control the structural response whereas the active control system depends on external power. The power requirement for active control of civil engineering structures is usually quite high. Thus, a hybrid control system is a viable solution to alleviate some of the limitations. In this paper a multi‐objective optimal design of a hybrid control system for seismically excited building structures has been proposed. A tuned mass damper (TMD) and an active mass driver (AMD) have been used as the passive and active control components of the hybrid control system, respectively. A fuzzy logic controller (FLC) has been used to drive the AMD as the FLC has inherent robustness and ability to handle the non‐linearities and uncertainties. The genetic algorithm has been used for the optimization of the control system. Peak acceleration and displacement responses non‐dimensionalized with respect to the uncontrolled peak acceleration and displacement responses, respectively, have been used as the two objectives of the multi‐objective optimization problem. The proposed design approach for an optimum hybrid mass damper (HMD) system, driven by FLC has been demonstrated with the help of a numerical example. It is shown that the optimum values of the design parameters of the hybrid control system can be determined without specifying the modes to be controlled. The proposed FLC driven HMD has been found to be very effective for vibration control of seismically excited buildings in comparison with the available results for the same example structure but with a different optimal absorber. Copyright © 2002 John Wiley & Sons, Ltd.     

Active viscous damping system with amplifying braces for control of MDOF structures

The development and the applications of an active controlled viscous damping device with amplifying braces are described. The system of the dampers, defined as active viscous damping system (AVDS), connected to an amplifying brace (AB) is presented herein. Instantaneous control theory with velocity and acceleration feedback is used to obtain the control forces at each time step during an excitation. Control of the damping forces is possible due to the mechanical structure of the proposed AVDS, and the connection to the AB. The proposed system can be efficiently used to enhance the damping of a structure without modifying its stiffness. The added damping forces can be adjusted in a wide range. The efficiency of the presented system is demonstrated by a numerical simulation of a seven‐storey building subjected to earthquakes. The simulation shows a considerable reduction of control forces required for control to the AVDS with AB, compared to the same system without AB. Copyright © 2002 John Wiley & Sons, Ltd.     

探测大城市活断层的地球物理方法

简要地介绍了开展大城市地震活断层探测的意义及世界各国开展活断层探测的基本情况。城市及邻近地区地震活断层引起的直下型地震 ,将会给大城市造成巨大的地震灾害。准确地探测出大城市的活断层分布 ,采取有效措施 ,可大大降低地震时的损失。文中重点介绍了开展地震活断层探测的地球物理方法的类型和主要特点 ,在区域探查与初步鉴定阶段、详细探测与精确定位阶段、孕震构造探测阶段可能涉及到的各种地球物理探测方法、适用范围及所能解决的主要问题     

Establishment of a Non-Permanent GPS Network to Monitor the Recent NE-SW Deformation in the Granada Basin (Betic Cordillera,Southern Spain)

The Granada Basin (Central Betic Cordillera), one of the most seismically active areas of the Iberian Peninsula, is currently subjected to NW-SE compression and NE-SW extension. The present day extension is accommodated by normal faults with various orientations but particularly with a NW-SE strike. At the surface, these active NW-SE normal faults are mainly concentrated on the NE part of the Basin. In this part we have selected a 15-km long segment where several active normal faults crop out. Using the marine Tortonian rocks as a reference, we have calculated a minimum extensional rate of 0.15-0.30 mm/year. The observed block rotation, the listric geometry of faults at depth and the distribution of seismicity over the whole Basin, indicate that this rate is a minimum value. In the framework of an interdisciplinary research project a non-permanent GPS-network has been established in the central sector of Betic Cordillera to monitor the crustal deformations. The first two observation campaigns were done in 1999 and 2000.     

滇池农村固体废物和化肥流失治理试验研究

怎样合理处置农村固体废物和减少农田化肥流失一直是农村面源污染控制的难题之一。该研究将农村固体废物的处理与减少化肥施用措施有机结合，利用微生物复合发酵剂和农村固体废物生产活性肥料，开展了一系列农业种植试验和数据监测，在此基础上，提出了一套实用性强、效果好的控制农业固体废物和化肥流失污染的对策措施。